netProfile¶

The following operations can be performed on "netProfile":

add| rm| set| unset| bind| unbind| show|

add netProfile¶

Creates a net profile. A net profile (or network profile) contains an IP address or an IP set. During communication with physical servers or peers, the Citrix ADC uses the addresses specified in the profile as the source IP address.

Synopsis¶

Arguments¶

name

Name for the net profile. Must begin with a letter, number, or the underscore character (_), and can consist of letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore characters. Cannot be changed after the profile is created. Choose a name that helps identify the net profile.

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value: 0 Maximum value: 4094

srcIP

IP address or the name of an IP set.

srcippersistency

When the net profile is associated with a virtual server or its bound services, this option enables the Citrix ADC to use the same address, specified in the net profile, to communicate to servers for all sessions initiated from a particular client to the virtual server.

Possible values: ENABLED, DISABLED Default value: DISABLED

overrideLsn

USNIP/USIP settings override LSN settings for configured service/virtual server traffic..

Possible values: ENABLED, DISABLED Default value: DISABLED

MBF

Response will be sent using learnt info if enabled. When creating a netprofile, if you do not set this parameter, the netprofile inherits the global MBF setting (available in the enable ns mode and disable ns mode CLI commands, or in the System > Settings > Configure modes > Configure Modes dialog box). However, you can override this setting after you create the netprofile

Possible values: ENABLED, DISABLED

proxyProtocol

Proxy Protocol Action (Enabled/Disabled)

Possible values: ENABLED, DISABLED Default value: DISABLED

proxyProtocoltxversion

Proxy Protocol Version (V1/V2)

Possible values: V1, V2 Default value: V1

Example¶

add netProfile prof1 -srcip 10.102.1.10

rm netProfile¶

Removes a net profile from the Citrix ADC.

Synopsis¶

rm netProfile <name> ...

Arguments¶

name

Name of the net profile to be removed.

Example¶

rm netProfile prof1

set netProfile¶

Modifies the srcIP parameter of a net profile.

Synopsis¶

Arguments¶

name

Name of the net profile whose parameter you want to modify.

srcIP

IP address or the name of an IP set.

srcippersistency

When the net profile is associated with a virtual server or its bound services, this option enables the Citrix ADC to use the same address, specified in the net profile, to communicate to servers for all sessions initiated from a particular client to the virtual server.

Possible values: ENABLED, DISABLED Default value: DISABLED

overrideLsn

USNIP/USIP settings override LSN settings for configured service/virtual server traffic..

Possible values: ENABLED, DISABLED Default value: DISABLED

MBF

Response will be sent using learnt info if enabled. When creating a netprofile, if you do not set this parameter, the netprofile inherits the global MBF setting (available in the enable ns mode and disable ns mode CLI commands, or in the System > Settings > Configure modes > Configure Modes dialog box). However, you can override this setting after you create the netprofile

Possible values: ENABLED, DISABLED

proxyProtocol

Proxy Protocol Action (Enabled/Disabled)

Possible values: ENABLED, DISABLED Default value: DISABLED

proxyProtocoltxversion

Proxy Protocol Version (V1/V2)

Possible values: V1, V2 Default value: V1

Example¶

set netProfile prof_1 -srcIP 10.102.1.10

unset netProfile¶

Removes the srcIP attribute of a net profile..Refer to the set netProfile command for meanings of the arguments.

Synopsis¶

unset netProfile <name> [-srcIP] [-srcippersistency] [-overrideLsn] [-MBF] [-proxyProtocol] [-proxyProtocoltxversion]

Example¶

unset netProfile prof1 -srcIP

bind netProfile¶

Binds specified port range to a netprofile.

Synopsis¶

bind netProfile <name> (-srcPortRange <int[-int]> ... | (-natRule <ip_addr> <netmask> <rewriteIp>))

Arguments¶

name

Name of the netprofile to which to bind port ranges.

srcPortRange

When the source port range is configured and associated with the netprofile bound to a service group, Citrix ADC will choose a port from the range configured for connection establishment at the backend servers. Minimum value: 1024 Maximum value: 65535

natRule

When Natrule is configured and netprofile is bound to lb vserver, Citrix ADC will use the prefix of rewrite IP for outgoing packets if prefix of source IP of incoming packet matches with prefix of IP of natrule. This will take preference over USIP and USNIP configuration. ip_addr : IP for which prefix need to rewritten. netmask : Netmask for NatRule IP and RewriteIP. rewriteIp : Prefix for modified IP.

netmask

rewriteIp

Example¶

bind netprofile npf_1 -srcportrange 2000-3000 bind netprofile npf_1 -natRule 10.0.0.0 255.0.0.0 11.0.0.0

unbind netProfile¶

Unbinds the specified port range from a netprofile.

Synopsis¶

unbind netProfile <name> (-srcPortRange <int[-int]> ... | (-natRule <ip_addr> <netmask>))

Arguments¶

name

Name of the netprofile to which to bind port ranges.

srcPortRange

When the source port range is configured and associated with the netprofile bound to a service group, Citrix ADC will choose a port from the range configured for connection establishment at the backend servers. Minimum value: 1024 Maximum value: 65535

natRule

Unbind the already bound natrule from netProfile.

netmask

Example¶

unbind netprofile npf_1 -srcportrange 2000-3000 unbind netprofile npf_1 -natrule 1.0.0.0 255.0.0.0

show netProfile¶

Displays the settings of all net profiles configured on the Citrix ADC, or of the specified net profile.

Synopsis¶

show netProfile [<name>]

Arguments¶

name

Name of the net profile whose details you want to display.

Output¶

srcIP

Source IPaddress or IPSET name.

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

srcippersistency

When the net profile is associated with a virtual server or its bound services, this option enables the Citrix ADC to use the same address, specified in the net profile, to communicate to servers for all sessions initiated from a particular client to the virtual server.

netprofRefcount

Used to keep reference count of IP

overrideLsn

USNIP/USIP settings override LSN settings for configured service/virtual server traffic..

srcPortRange

When the source port range is configured and associated with the netprofile bound to a service group, Citrix ADC will choose a port from the range configured for connection establishment at the backend servers.

stateflag

state flag

flags

natRule

IPv4 network address on whose traffic you want the Citrix ADC to do rewrite ip prefix.

netmask

rewriteIp

MBF

Response will be sent using learnt info if enabled. When creating a netprofile, if you do not set this parameter, the netprofile inherits the global MBF setting (available in the enable ns mode and disable ns mode CLI commands, or in the System > Settings > Configure modes > Configure Modes dialog box). However, you can override this setting after you create the netprofile

proxyProtocol

Proxy Protocol Action (Enabled/Disabled)

proxyProtocoltxversion

Proxy Protocol Version (V1/V2)

devno

count

Example¶

show netProfile