fis¶
The following operations can be performed on "fis":
add fis¶
Adds a failover interface set (FIS) to the Citrix ADC. A FIS is a logical group of interfaces. In an HA configuration, using a FIS is a way to prevent failover by grouping interfaces so that, when one interface fails, other functioning interfaces are still available. A FIS can also be configured for the nodes of a Citrix ADC cluster.
Synopsis¶
add fis <name> [-ownerNode <positive_integer>]
Arguments¶
name
Name for the FIS to be created. Leading character must be a number or letter. Other characters allowed, after the first character, are @ _ - . (period) : (colon) # and space ( ). Note: In a cluster setup, the FIS name on each node must be unique.
ownerNode
ID of the cluster node for which you are creating the FIS. Can be configured only through the cluster IP address. Default value: -1 Minimum value: 0 Maximum value: 31
rm fis¶
Removes an FIS from the Citrix ADC. When an FIS is removed, its interfaces are marked as critical interfaces.
Synopsis¶
rm fis <name>
Arguments¶
name
Name of the FIS that you want to remove from the Citrix ADC.
bind fis¶
Binds the specified interfaces to a FIS.
Synopsis¶
bind fis <name> <ifnum> ...
Arguments¶
name
The name of the FIS to which you want to bind interfaces.
ifnum
Interface to be bound to the FIS, specified in slot/port notation (for example, 1/3).
unbind fis¶
Unbinds the specified interfaces from a FIS. An unbound interface becomes a critical interface if it is enabled and HA MON is on.
Synopsis¶
unbind fis <name> <ifnum> ...
Arguments¶
name
Name of the FIS from which to unbind interfaces.
ifnum
Interfaces to unbind from the FIS, specified in slot/port notation (for example, 1/3). Use spaces to separate multiple entries.
show fis¶
Displays the configured FISs.
Synopsis¶
show fis [<name>]
Arguments¶
name
The name of the FIS configured on the appliance.
Output¶
ifaces
Interfaces to be bound to the FIS, in slot/port notation (for example, 1/3).
stateflag
Used internally for display.
ifnum
Interface to be bound to the FIS, specified in slot/port notation (for example, 1/3)
ownerNode
ID of the cluster node for which you are creating the FIS. Can be configured only through the cluster IP address.
devno
count
Example¶
show fis 1) FIS: fis1 Member Interfaces : 1/1 Done