serviceGroup¶

The following operations can be performed on "serviceGroup":

add serviceGroup¶

Creates a service group. You can group similar services into a service group and use them as a single entity.

Synopsis¶

add serviceGroup <serviceGroupName>@ <serviceType> [-cacheType <cacheType>] [-td <positive_integer>] [-maxClient <positive_integer>] [-maxReq <positive_integer>] [-cacheable ( YES | NO )] [-cip ( ENABLED | DISABLED ) [<cipHeader>]] [-usip ( YES | NO )] [-pathMonitor ( YES | NO )] [-pathMonitorIndv ( YES | NO )] [-useproxyport ( YES | NO )] [-healthMonitor ( YES | NO )] [-sp ( ON | OFF )] [-rtspSessionidRemap ( ON | OFF )] [-cltTimeout <secs>] [-svrTimeout <secs>] [-CKA ( YES | NO )] [-TCPB ( YES | NO )] [-CMP ( YES | NO )] [-maxBandwidth <positive_integer>] [-monThreshold <positive_integer>] [-state ( ENABLED | DISABLED )] [-downStateFlush ( ENABLED | DISABLED )] [-tcpProfileName <string>] [-httpProfileName <string>] [-comment <string>] [-appflowLog ( ENABLED | DISABLED )] [-netProfile <string>] [-autoScale <autoScale> -memberPort <port> [-autoDisablegraceful ( YES | NO )] [-autoDisabledelay <secs>] ] [-monConnectionClose ( RESET | FIN )]

Arguments¶

serviceGroupName

Name of the service group. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Can be changed after the name is created.

serviceType

Protocol used to exchange data with the service.

Possible values: HTTP, FTP, TCP, UDP, SSL, SSL_BRIDGE, SSL_TCP, DTLS, NNTP, RPCSVR, DNS, ADNS, SNMP, RTSP, DHCPRA, ANY, SIP_UDP, SIP_TCP, SIP_SSL, DNS_TCP, ADNS_TCP, MYSQL, MSSQL, ORACLE, MONGO, MONGO_TLS, RADIUS, RADIUSListener, RDP, DIAMETER, SSL_DIAMETER, TFTP, SMPP, PPTP, GRE, SYSLOGTCP, SYSLOGUDP, FIX, SSL_FIX, USER_TCP, USER_SSL_TCP, QUIC, IPFIX, LOGSTREAM

cacheType

Cache type supported by the cache server.

Possible values: TRANSPARENT, REVERSE, FORWARD

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Minimum value: 0 Maximum value: 4094

maxClient

Maximum number of simultaneous open connections for the service group. Minimum value: 0 Maximum value: 4294967294

maxReq

Maximum number of requests that can be sent on a persistent connection to the service group. Note: Connection requests beyond this value are rejected. Minimum value: 0 Maximum value: 65535

cacheable

Use the transparent cache redirection virtual server to forward the request to the cache server. Note: Do not set this parameter if you set the Cache Type.

Possible values: YES, NO Default value: NO

cip

Insert the Client IP header in requests forwarded to the service.

Possible values: ENABLED, DISABLED

cipHeader

Name of the HTTP header whose value must be set to the IP address of the client. Used with the Client IP parameter. If client IP insertion is enabled, and the client IP header is not specified, the value of Client IP Header parameter or the value set by the set ns config command is used as client's IP header name.

usip

Use client's IP address as the source IP address when initiating connection to the server. With the NO setting, which is the default, a mapped IP (MIP) address or subnet IP (SNIP) address is used as the source IP address to initiate server side connections.

Possible values: YES, NO

pathMonitor

Path monitoring for clustering

Possible values: YES, NO

pathMonitorIndv

Individual Path monitoring decisions.

Possible values: YES, NO

useproxyport

Use the proxy port as the source port when initiating connections with the server. With the NO setting, the client-side connection port is used as the source port for the server-side connection. Note: This parameter is available only when the Use Source IP (USIP) parameter is set to YES.

Possible values: YES, NO

healthMonitor

Monitor the health of this service. Available settings function as follows: YES - Send probes to check the health of the service. NO - Do not send probes to check the health of the service. With the NO option, the appliance shows the service as UP at all times.

Possible values: YES, NO Default value: YES

sp

Enable surge protection for the service group.

Possible values: ON, OFF Default value: OFF

rtspSessionidRemap

Enable RTSP session ID mapping for the service group.

Possible values: ON, OFF Default value: OFF

cltTimeout

Time, in seconds, after which to terminate an idle client connection. Maximum value: 31536000

svrTimeout

Time, in seconds, after which to terminate an idle server connection. Maximum value: 31536000

CKA

Enable client keep-alive for the service group.

Possible values: YES, NO

TCPB

Enable TCP buffering for the service group.

Possible values: YES, NO

CMP

Enable compression for the specified service.

Possible values: YES, NO

maxBandwidth

Maximum bandwidth, in Kbps, allocated for all the services in the service group. Minimum value: 0 Maximum value: 4294967287

monThreshold

Minimum sum of weights of the monitors that are bound to this service. Used to determine whether to mark a service as UP or DOWN. Minimum value: 0 Maximum value: 65535

state

Initial state of the service group.

Possible values: ENABLED, DISABLED Default value: ENABLED

downStateFlush

Flush all active transactions associated with all the services in the service group whose state transitions from UP to DOWN. Do not enable this option for applications that must complete their transactions.

Possible values: ENABLED, DISABLED Default value: ENABLED

tcpProfileName

Name of the TCP profile that contains TCP configuration settings for the service group.

httpProfileName

Name of the HTTP profile that contains HTTP configuration settings for the service group.

comment

Any information about the service group.

appflowLog

Enable logging of AppFlow information for the specified service group.

Possible values: ENABLED, DISABLED Default value: ENABLED

netProfile

Network profile for the service group.

autoScale

Auto scale option for a servicegroup

Possible values: DISABLED, DNS, POLICY, CLOUD, API Default value: DISABLED

memberPort

member port

autoDisablegraceful

Indicates graceful shutdown of the service. System will wait for all outstanding connections to this service to be closed before disabling the service.

Possible values: YES, NO Default value: NO

autoDisabledelay

The time allowed (in seconds) for a graceful shutdown. During this period, new connections or requests will continue to be sent to this service for clients who already have a persistent session on the system. Connections or requests from fresh or new clients who do not yet have a persistence sessions on the system will not be sent to the service. Instead, they will be load balanced among other available services. After the delay time expires, no new requests or connections will be sent to the service.

monConnectionClose

Close monitoring connections by sending the service a connection termination message with the specified bit set.

Possible values: RESET, FIN Default value: NONE

Example¶

add servicegroup http_svc_group http To add service groups sgrp1, sgrp2 and sgrp3 at one go use the following command: add servicegroup sgrp[1-3] http

rm serviceGroup¶

Removes a service group.

Synopsis¶

rm serviceGroup <serviceGroupName>@

Arguments¶

serviceGroupName

Name of the service group.

Example¶

rm servicegroup http_svc_group To remove multiple servicegroups at once, the following command can be used: rm servicegroup http_svc_group[1-3]

set serviceGroup¶

Modifies the specified parameters of a service group.

Synopsis¶

Arguments¶

serviceGroupName

Name of the service group.

serverName

Name of the server to which to bind the service group.

port

Server port number.

weight

Weight to assign to the servers in the service group. Specifies the capacity of the servers relative to the other servers in the load balancing configuration. The higher the weight, the higher the percentage of requests sent to the service. Minimum value: 1 Maximum value: 100

CustomServerID

The identifier for this IP:Port pair. Used when the persistency type is set to Custom Server ID. Default value: "None"

hashId

The hash identifier for the service. This must be unique for each service. This parameter is used by hash based load balancing methods. Minimum value: 1

nameServer

Specify the nameserver to which the query for bound domain needs to be sent. If not specified, use the global nameserver

dbsTTL

Specify the TTL for DNS record for domain based service.The default value of ttl is 0 which indicates to use the TTL received in DNS response for monitors Default value: 0

monitorName

Name of the monitor bound to the service group. Used to assign a weight to the monitor.

weight

weight of the monitor that is bound to servicegroup. Minimum value: 1

maxClient

Maximum number of simultaneous open connections for the service group. Minimum value: 0 Maximum value: 4294967294

maxReq

Maximum number of requests that can be sent on a persistent connection to the service group. Note: Connection requests beyond this value are rejected. Minimum value: 0 Maximum value: 65535

healthMonitor

Monitor the health of this service. Available settings function as follows: YES - Send probes to check the health of the service. NO - Do not send probes to check the health of the service. With the NO option, the appliance shows the service as UP at all times.

Possible values: YES, NO Default value: YES

cacheable

Use the transparent cache redirection virtual server to forward the request to the cache server. Note: Do not set this parameter if you set the Cache Type.

Possible values: YES, NO Default value: NO

cip

Insert the Client IP header in requests forwarded to the service.

Possible values: ENABLED, DISABLED

cipHeader

CIP Header.

usip

Use client's IP address as the source IP address when initiating connection to the server. With the NO setting, which is the default, a mapped IP (MIP) address or subnet IP (SNIP) address is used as the source IP address to initiate server side connections.

Possible values: YES, NO

pathMonitor

Path monitoring for clustering

Possible values: YES, NO

pathMonitorIndv

Individual Path monitoring decisions.

Possible values: YES, NO

useproxyport

Use the proxy port as the source port when initiating connections with the server. With the NO setting, the client-side connection port is used as the source port for the server-side connection. Note: This parameter is available only when the Use Source IP (USIP) parameter is set to YES.

Possible values: YES, NO

sp

Enable surge protection for the service group.

Possible values: ON, OFF Default value: OFF

rtspSessionidRemap

Enable RTSP session ID mapping for the service group.

Possible values: ON, OFF Default value: OFF

cltTimeout

Time, in seconds, after which to terminate an idle client connection. Maximum value: 31536000

svrTimeout

Time, in seconds, after which to terminate an idle server connection. Maximum value: 31536000

CKA

Enable client keep-alive for the service group.

Possible values: YES, NO

TCPB

Enable TCP buffering for the service group.

Possible values: YES, NO

CMP

Enable compression for the specified service.

Possible values: YES, NO

maxBandwidth

Maximum bandwidth, in Kbps, allocated for all the services in the service group. Minimum value: 0 Maximum value: 4294967287

monThreshold

Minimum sum of weights of the monitors that are bound to this service. Used to determine whether to mark a service as UP or DOWN. Minimum value: 0 Maximum value: 65535

downStateFlush

Flush all active transactions associated with all the services in the service group whose state transitions from UP to DOWN. Do not enable this option for applications that must complete their transactions.

Possible values: ENABLED, DISABLED Default value: ENABLED

tcpProfileName

Name of the TCP profile that contains TCP configuration settings for the service group.

httpProfileName

Name of the HTTP profile that contains HTTP configuration settings for the service group.

comment

Any information about the service group.

appflowLog

Enable logging of AppFlow information for the specified service group.

Possible values: ENABLED, DISABLED Default value: ENABLED

netProfile

Network profile for the service group.

autoDisablegraceful

Indicates graceful shutdown of the service. System will wait for all outstanding connections to this service to be closed before disabling the service.

Possible values: YES, NO Default value: NO

autoDisabledelay

The time allowed (in seconds) for a graceful shutdown. During this period, new connections or requests will continue to be sent to this service for clients who already have a persistent session on the system. Connections or requests from fresh or new clients who do not yet have a persistence sessions on the system will not be sent to the service. Instead, they will be load balanced among other available services. After the delay time expires, no new requests or connections will be sent to the service.

monConnectionClose

Close monitoring connections by sending the service a connection termination message with the specified bit set.

Possible values: RESET, FIN Default value: NONE

autoScale

Set this parameter to API to enable using Desired State API for binding intended servicegroup member set. Setting this parameter to API may result in error if the already existing member bindings fall under below category - 1. Domain based server 2. Named servers 3. servers whose name and IP do not match. example: add server 1.2.3.4 4.3.2.1 4. Loopback servers should be named only 127.0.0.1 or 0000:0000:0000:0000:0000:0000:0000:0001.

Possible values: DISABLED, DNS, POLICY, CLOUD, API Default value: DISABLED

Example¶

set servicegroup http_svc_group -maxClient 100 To set the attribute maxclient for multiple servicegroups at once, use the following command: set servicegroup http_svc_group[1-3] -maxClient 100

unset serviceGroup¶

Removes the attributes of the specified service group. Attributes for which a default value is available revert to their default values..Refer to the set serviceGroup command for meanings of the arguments.

Synopsis¶

unset serviceGroup <serviceGroupName>@ [<serverName>@ [<port>] [-weight] [-CustomServerID] [-hashId] [-riseApbrStatsMsgCode] [-nameServer] [-dbsTTL]] [-maxClient] [-maxReq] [-cacheable] [-cip] [-usip] [-useproxyport] [-sp] [-rtspSessionidRemap] [-cltTimeout] [-svrTimeout] [-CKA] [-TCPB] [-CMP] [-maxBandwidth] [-monThreshold] [-tcpProfileName] [-httpProfileName] [-appflowLog] [-netProfile] [-autoDisablegraceful] [-autoDisabledelay] [-monitorName] [-weight] [-healthMonitor] [-cipHeader] [-pathMonitor] [-pathMonitorIndv] [-downStateFlush] [-comment] [-monConnectionClose]

Example¶

unset servicegroup http_svc_group -maxClient

bind serviceGroup¶

Binds a service to a service group.

Synopsis¶

Arguments¶

serviceGroupName

Name of the service group.

IP

IP address of the server that hosts the service. Mutually exclusive with the Server Name parameter.

serverName

Name of the server that hosts the service. Mutually exclusive with the IP address parameter.

port

Port number of the service. Each service must have a unique port number.

monitorName

The name of the service or a service group to which the monitor is to be bound.

monState

Administrative state assigned to the monitor and service group binding. If set to disabled, the service group is not monitored.

Possible values: ENABLED, DISABLED Default value: ENABLED

passive

Indicates if load monitor is passive. A passive load monitor does not remove service from LB decision when threshold is breached.

weight

CustomServerID

Unique service identifier. Used when the persistency type for the virtual server is set to Custom Server ID. Default value: "None"

state

Initial state of the service after binding.

Possible values: ENABLED, DISABLED Default value: ENABLED

hashId

Unique numerical identifier used by hash based load balancing methods to identify a service. Minimum value: 1

nameServer

Specify the nameserver to which the query for bound domain needs to be sent. If not specified, use the global nameserver

dbsTTL

Specify the TTL for DNS record for domain based service.The default value of ttl is 0 which indicates to use the TTL received in DNS response for monitors Default value: 0

Example¶

bind servicegroup http_svc_group 10.102.27.153 80 To bind multiple servers to a servicegroup, following command can be used: bind servicegroup http_svc_group 10.102.27.[153-155] 80

unbind serviceGroup¶

Unbinds a service or a monitor from a service group.

Synopsis¶

unbind serviceGroup <serviceGroupName> (<IP>@ | <serverName>@ | -monitorName <string>@) [<port>]

Arguments¶

serviceGroupName

Name of the service group.

IP

IP address of the server that hosts the service. Mutually exclusive with the Server Name parameter.

serverName

Name of the server that hosts the service. Mutually exclusive with the IP Address parameter.

port

Port number of the service.

monitorName

Name of the monitor to bind to the service group.

Example¶

unbind servicegroup http_svc_group 10.102.27.153 80 To unbind multiple servers following command can be used: unbind servicegroup http_svc_group 10.102.27.[153-155] 80

enable serviceGroup¶

Enables a service group or a member of the service group.

Synopsis¶

enable serviceGroup <serviceGroupName>@ [<serverName>@] [<port>]

Arguments¶

serviceGroupName

Name of the service group.

serverName

Name of the server that hosts the service.

port

Port number of the service to be enabled.

Example¶

enable servicegroup http_svc_group To enable multiple service groups at one go use the following command: enable servicegroup http_svc_group[1-3]

disable serviceGroup¶

Disables a service group or a member of a service group. To disable a service group, provide only the service group name. To disable only a member of a service group, in addition to the service group name, provide the name of the server that hosts the service, and the port number of the service.

Synopsis¶

disable serviceGroup <serviceGroupName>@ [<serverName>@] [<port>] [-delay <secs>] [-graceFul ( YES | NO )]

Arguments¶

serviceGroupName

Name of the service group.

serverName

Name of the server that hosts the service.

port

Port number of the service.

delay

Time, in seconds, allocated for a shutdown of the services in the service group. During this period, new requests are sent to the service only for clients who already have persistent sessions on the appliance. Requests from new clients are load balanced among other available services. After the delay time expires, no requests are sent to the service, and the service is marked as unavailable (OUT OF SERVICE).

graceFul

Wait for all existing connections to the service to terminate before shutting down the service.

Possible values: YES, NO Default value: NO

Example¶

disable servicegroup http_svc_group 10.102.27.153 80 -delay 10 To disable multiple servicegroups use the following command: disable servicegroup http_svc_group[1-3] 10.102.27.[153-155] 80 -delay 30

show serviceGroup¶

Displays the specified service group's binding information.

Synopsis¶

show serviceGroup [<serviceGroupName> | -includeMembers]

Arguments¶

serviceGroupName

Name of the service group.

includeMembers

Display the members of the listed service groups in addition to their settings. Can be specified when no service group name is provided in the command. In that case, the details displayed for each service group are identical to the details displayed when a service group name is provided, except that bound monitors are not displayed.

Output¶

numOfconnections

This will tell the number of client side connections are still open.

numOfCurConnections

This will tell number of current client connections

numOfLastConnections

This will tell number of connections that are linked by last connection

serviceType

Protocol used to exchange data with the service.

port

The port number of the service to be enabled.

td

Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.

serviceConfTpye

serviceConfType

The configuration type of the service group.

value

SSL Status.

cacheType

Cache type supported by the cache server.

maxClient

Maximum number of simultaneous open connections for the service group.

maxReq

Maximum number of requests that can be sent on a persistent connection to the service group. Note: Connection requests beyond this value are rejected.

cacheable

The state of cache on the service.

cip

Insert the Client IP header in requests forwarded to the service.

cipHeader

CIP Header.

usip

Use client's IP address as the source IP address when initiating connection to the server. With the NO setting, which is the default, a mapped IP (MIP) address or subnet IP (SNIP) address is used as the source IP address to initiate server side connections.

pathMonitor

Path monitoring for clustering

pathMonitorIndv

Individual Path monitoring decisions.

useproxyport

The use of client's Port.

monweight

weight of the monitor that is bound to servicegroup.

sc

Whether SureConnect is enabled on this service or not.

sp

Enable surge protection for the service group.

rtspSessionidRemap

Enable RTSP session ID mapping for the service group.

cltTimeout

Time, in seconds, after which to terminate an idle client connection.

svrTimeout

Time, in seconds, after which to terminate an idle server connection.

CKA

Enable client keep-alive for the service group.

TCPB

Enable TCP buffering for the service group.

CMP

Enable compression for the specified service.

maxBandwidth

Maximum bandwidth, in Kbps, allocated for all the services in the service group.

state

The state of the service group

svrState

The state of the service

delay

The remaining time in seconds for the service to be disabled

delay

The remaning time in seconds for the service to be disabled

IP

IP Address.

serverName

The name of the server to be changed.

monitorName

Monitor name.

monThreshold

Minimum sum of weights of the monitors that are bound to this service. Used to determine whether to mark a service as UP or DOWN.

monState

Monitor state.

weight

CustomServerID

The identifier for this IP:Port pair. Used when the persistency type is set to Custom Server ID.

serverID

The identifier for the service. This is used when the persistency type is set to Custom Server ID.

monState

The running state of the monitor on this service.

monStatCode

The code indicating the monitor response.

monStatParam1

First parameter for use with message code.

monStatParam2

Second parameter for use with message code.

monStatParam3

Third parameter for use with message code.

monitorTotalProbes

Total number of probes sent to monitor this service.

monitorTotalFailedProbes

Total number of failed probes

monitorCurrentFailedProbes

Total number of currently failed probes

downStateFlush

Flush all active transactions associated with all services in the service group whose state transitions from UP to DOWN. Do not enable this option for applications that must complete their transactions.

lastresponse

The string form of monstatcode.

stateChangeTimeSec

Time when last state change occurred. Seconds part.

stateChangeTimemSec

Time when last state change occurred. Milliseconds part.

timeSinceLastStateChange

Time in milliseconds since the last state change.

ticksSinceLastStateChange

Time in 10 millisecond ticks since the last state change.

StateUpdateReason

Checks state update reason on the secondary node.

ClMonOwner

Tells the mon owner of the service.

ClMonView

Tells the view id of the monitoring owner.

groupCount

Servicegroup Count

comment

Any information about the service group.

tcpProfileName

Name of the TCP profile that contains TCP configuration settings for the service group.

httpProfileName

Name of the HTTP profile that contains HTTP configuration settings for the service group.

hashId

The hash identifier for the service. This must be unique for each service. This parameter is used by hash based load balancing methods.

riseApbrStatsMsgCode

The code indicating the rise apbr status.

riseApbrStatsMsgCode2

The code indicating other rise stats.

graceFul

Indicates graceful shutdown of the service. System will wait for all outstanding connections to this service to be closed before disabling the service.

healthMonitor

Monitor the health of this service. Available settings function as follows: YES - Send probes to check the health of the service. NO - Do not send probes to check the health of the service. With the NO option, the appliance shows the service as UP at all times.

appflowLog

Enable logging of AppFlow information for the specified service group.

netProfile

Network profile for the service group.

autoScale

Auto scale option for a servicegroup

memberPort

member port

autoDisablegraceful

Indicates graceful shutdown of the service. System will wait for all outstanding connections to this service to be closed before disabling the service.

autoDisabledelay

The time allowed (in seconds) for a graceful shutdown. During this period, new connections or requests will continue to be sent to this service for clients who already have a persistent session on the system. Connections or requests from fresh or new clients who do not yet have a persistence sessions on the system will not be sent to the service. Instead, they will be load balanced among other available services. After the delay time expires, no new requests or connections will be sent to the service.

state

Monitor state.

weight

weight of the monitor that is bound to servicegroup.

serviceIPstr

This field has been intorduced to show the dbs services ip

serviceGroupEntName2

passive

Indicates if load monitor is passive. A passive load monitor does not remove service from LB decision when threshold is breached.

serviceGroupeffectivestate

Indicates the effective servicegroup state based on the state of the bound service items.If all services are UP the effective state is UP, if all are DOWN its DOWN,if all are OFS its OFS.If atleast one serviceis UP and rest are either DOWN or OFS, the effective state is PARTIAL-UP.If atleast one bound service is DOWN and rest are OFS the effective state is PARTIAL DOWN.

monConnectionClose

Close monitoring connections by sending the service a connection termination message with the specified bit set.

noDefaultBindings

to determine if the configuration is from stylebooks

nameServer

Specify the nameserver to which the query for bound domain needs to be sent. If not specified, use the global nameserver

dbsTTL

Specify the TTL for DNS record for domain based service.The default value of ttl is 0 which indicates to use the TTL received in DNS response for monitors

svcitmActSvcs

This gives the total active service items for an FQDN for SRV type server binding

svcitmPriority

This gives the priority of the FQDN service items for SRV server binding

svcitmBoundSvcs

This gives the total bound items for an FQDN for SRV type server binding

responseTime

Response time of this monitor in milli sec.

members

Desired servicegroupmember binding set. Any existing servicegroupmember which is not part of the input will be deleted or disabled based on graceful setting on servicegroup.

failedmembers

List of servicegroupmembers which couldn't be bound.

trofsReason

Specify reason if service group member in TROFS

monUserStatusMesg

This field has been introduced to show user monitor failure reasons

devno

count

stateflag

stat serviceGroup¶

Displays configuration statistics of the specified service group or all the service groups configured on the appliance.

Synopsis¶

stat serviceGroup [<serviceGroupName>] [-detail] [-fullValues] [-ntimes <positive_integer>] [-logFile <input_filename>] [-clearstats ( basic | full )]

Arguments¶

serviceGroupName

Name of the service group for which to display settings.

detail

Specifies detailed output (including more statistics). The output can be quite voluminous. Without this argument, the output will show only a summary.

fullValues

Specifies that numbers and strings should be displayed in their full form. Without this option, long strings are shortened and large numbers are abbreviated

ntimes

The number of times, in intervals of seven seconds, the statistics should be displayed. Default value: 1 Minimum value: 0

logFile

The name of the log file to be used as input.

clearstats

Clear the statsistics / counters

Possible values: basic, full

Output¶

count

devno

stateflag

Counters¶

State

Current state of the server. There are seven possible values: UP(7), DOWN(1), UNKNOWN(2), BUSY(3), OFS(Out of Service)(4), TROFS(Transition Out of Service)(5), TROFS_DOWN(Down When going Out of Service)(8)

Service type (Type)

The service type of this service.Possible values are ADNS, DNS, MYSQL, RTSP, SSL_DIAMETER, ADNS_TCP, DNS_TCP, NNTP, SIP_UDP, SSL_TCP, ANY, FTP, RADIUS, SNMP, TCP, DHCPRA, HTTP, RDP, SSL, TFTP, DIAMETER, MSSQL, RPCSVR, SSL_BRIDGE, UDP

stat serviceGroupMember

rename serviceGroup¶

Renames a service group.

Synopsis¶

rename serviceGroup <serviceGroupName>@ <newName>@

Arguments¶

serviceGroupName

Existing name of the service group.

newName

New name for the service group.

Example¶

rename service svcgrp1 svcgrp-new1

serviceGroup¶

add serviceGroup¶

Synopsis¶

Arguments¶

Example¶

rm serviceGroup¶

Synopsis¶

Arguments¶

Example¶

set serviceGroup¶

Synopsis¶

Arguments¶

Example¶

unset serviceGroup¶

Synopsis¶

Example¶

bind serviceGroup¶

Synopsis¶

Arguments¶

Example¶

unbind serviceGroup¶

Synopsis¶

Arguments¶

Example¶

enable serviceGroup¶

Synopsis¶

Arguments¶

Example¶

disable serviceGroup¶

Synopsis¶

Arguments¶

Example¶

show serviceGroup¶

Synopsis¶

Arguments¶

Output¶

stat serviceGroup¶

Synopsis¶

Arguments¶

Output¶

Counters¶

Related Commands¶

rename serviceGroup¶

Synopsis¶

Arguments¶

Example¶