NSERR_SSL_FIPSCARDLOCKED | 3584 | 0xe00 | FIPS card locked due to three unsuccessful login attempts |
|
NSERR_SSL_DOMINCOMPAT | 3585 | 0xe01 | Certificate is registered to a different domain; use the no domain check option to force the operation |
|
NSERR_SSL_NOMTHDCHANGE | 3586 | 0xe02 | Cannot change refresh method of CRL |
|
NSERR_SSL_URLSRVRNEEDED | 3587 | 0xe03 | Either URL or server-IP required on CRL |
|
NSERR_SSL_INVALID_URL | 3588 | 0xe04 | Invalid URL |
|
NSERR_SSL_MIXPARAMS | 3589 | 0xe05 | LDAP and HTTP parameters cannot both be specified |
|
NSERR_SSL_PKEY_MINSIZE | 3590 | 0xe06 | Certificate of size smaller than 512 bits not supported |
|
NSERR_SSL_SYNCINPROGRESS | 3591 | 0xe07 | Another synchronization is already in process, please try again later |
|
NSERR_SSL_SYNCFAILED | 3592 | 0xe08 | Synchronization failed, please try again |
|
NSERR_SSL_CIPHGRP_REFCNT | 3593 | 0xe09 | Cipher group has bound entities or is referenced by an SSL vserver or SSL service |
|
NSERR_SSL_CVM_NODSA | 3594 | 0xe0A | Loading DSA(DSS) certificate and key not supported on this platform |
|
NSERR_CERTHASHHEADER | 3595 | 0xe0B | CertHash header tag mandatory if certHash is enabled |
|
NSERR_SSL_CRLINREFRESH | 3596 | 0xe0C | CRL refresh in progress, details cannot be displayed |
|
NSERR_SSL_CRLMEM_EXCEEDS | 3597 | 0xe0D | CRL memory exhausted. Cannot load any more CRLs |
|
NSERR_SSL_CRLINDELETION | 3598 | 0xe0E | CRL deletion in progress, details cannot be displayed |
|
NSERR_SSL_INDELETE_NOREFRESH | 3599 | 0xe0F | CRL deletion in progress, cannot be refreshed |
|
NSERR_SSL_INREFRESH_NODELETE | 3600 | 0xe10 | CRL refresh in progress, cannot be removed |
|
NSERR_NOMIX | 3601 | 0xe11 | Cannot specify both HTTP data insertion and SSL actions |
|
NSERR_NOPOLICY_NONTRSVC | 3602 | 0xe12 | Cannot bind SSL policy to SSL backend service |
|
NSERR_SSL_SSLPOL_BIND_CONST | 3603 | 0xe13 | Cannot bind non-SSL policy to SSL vserver/service |
|
NSERR_SSL_NO_USABLE_CIPHERS | 3604 | 0xe14 | No usable ciphers configured on the SSL vserver/service |
|
NSERR_SSL_CERT_NOT_CA | 3605 | 0xe15 | Not a CA certificate |
|
NSERR_SSL_CACERT_NO_CRLSIGN | 3606 | 0xe16 | Specified certificate is either not a CA cert, or does not have privileges to issue CRLs |
|
NSERR_SSL_CRL_EXPIRED | 3607 | 0xe17 | CRL has expired |
|
NSERR_SSL_CRL_NOTYET_VALID | 3608 | 0xe18 | CRL is not yet valid |
|
NSERR_SSL_PARSING_DELTA_CRL_EXTN | 3609 | 0xe19 | Parsing of Delta-CRL extension failed |
|
NSERR_SSL_DELTA_CRL_MISSING_BASE_CRL | 3610 | 0xe1A | Base-CRL for the specified Delta-CRL is missing |
|
NSERR_NOFIPSCIPHER | 3611 | 0xe1B | Specified cipher/cipher-alias is not FIPS-approved |
|
NSERR_NOFIPSCIPHERGRP | 3612 | 0xe1C | Cipher group does not contain all FIPS-approved ciphers |
|
NSERR_NONFIPSCIPHERTOGRP | 3613 | 0xe1D | Cannot add non FIPS approved cipher to cipher group |
|
NSERR_NONFIPSALIASTOGRP | 3614 | 0xe1E | Cannot add non FIPS approved cipher alias to cipher group |
|
NSERR_NONFIPSGROUPTOGRP | 3615 | 0xe1F | Cannot add non FIPS cipher group to another cipher group |
|
NSERR_SSL_IMPORT_FIPSKEY_NAME_MISMATCH | 3616 | 0xe20 | Specified FIPS key name does not match with the exported FIPS key name |
|
NSERR_SSL_PKEY_SIZE_CA | 3617 | 0xe21 | CA certificate of size greater than 4096 bits not supported |
|
NSERR_SSL_CRL_PORT_MISMATCH | 3618 | 0xe22 | Port specified in URL does not match -port parameter |
|
NSERR_SSL_PKEY_SIZE_VPX | 3619 | 0xe23 | Certificate with key size greater than RSA512 or DSA512 bits not supported |
|
NSERR_SSL_DH_SIZE_VPX | 3620 | 0xe24 | DH params of size greater than 512 bits not supported |
|
NSERR_NOENT_CIPHER | 3621 | 0xe25 | No such cipher/cipherAlias/cipherGroup |
|
NSERR_FIPSFWWRONGMAJOR | 3622 | 0xe26 | The current firmwares major version is not supported for update operation |
|
NSERR_FIPSFWWRONGMINOR | 3623 | 0xe27 | The current firmwares minor version is not supported for update operation |
|
NSERR_FIPSFWUPDATED | 3624 | 0xe28 | The current firmware is already updated to 4.6.1 |
|
NSERR_SSL_PENDING_CMDS | 3625 | 0xe29 | Other commands (card health monitoring/traffic) are pending to FIPS card. Please try the firmware update command after some time |
|
NSERR_FIPSFWUPDATEDOREBOOT | 3626 | 0xe2A | Operation not permitted - FIPS card firmware update done, please reboot the system |
|
NSERR_SSL_SNI_NOTENABLE | 3627 | 0xe2B | SNI feature not enabled on the vserver/service |
|
NSERR_SSL_NO_CN | 3628 | 0xe2C | CommonName not present in certificate, it is must for a certificate to use for SNI |
|
NSERR_SSL_DUP_SNICERT | 3629 | 0xe2D | Trying to bind SNI certificate with duplicate CommonName, operation failed |
|
NSERR_SSL_SNI_NOTVALID_SERV | 3630 | 0xe2E | Operation not permitted - SNI feature not supported on SSL backend/internal service |
|
NSERR_SSL_NOT_SUPPORTED_ON_PLATFORM | 3631 | 0xe2F | Feature not supported on this platform |
|
NSERR_OCSP_REFERENCES | 3632 | 0xe30 | OCSP responder is bound to a vserver/certkey pair. Use unbind ssl certkey. |
|
NSERR_OCSP_SIGNER_NOKEY | 3633 | 0xe31 | Signing certificate must also have a private key. |
|
NSERR_SSL_NOT_SUPPORTED | 3634 | 0xe32 | OCSP responder must be an HTTP server; SSL is not supported. |
|
NSERR_OCSP_TOO_MANY_RESPONDERS | 3635 | 0xe33 | Too many OCSP responders configured to add another. Please delete some and try again. |
|
NSERR_OCSP_NO_DNS_SERVER_CONFIGURED | 3636 | 0xe34 | Unable to resolve DNS name. |
|
NSERR_SSL_DUP_SNICERT_BRKLINK | 3637 | 0xe35 | Some of the existing SNI cert bindings are broken due to presence of certificate with duplicate Common Name. |
|
NSERR_SSL_NO_CN_BRLLINK | 3638 | 0xe36 | All exitsing SNI Cert bindings are broken during update operation due to missing Common Name. |
|
NSERR_NGFIPSRESETREBOOT | 3639 | 0xe37 | Operation not permitted - FIPS card was reset, please reboot the system |
|
NSERR_NGFIPSINITREBOOT | 3640 | 0xe38 | Operation not permitted - FIPS card was initialized, please reboot the system |
|
NSERR_FIPSCMDTIMEOUT | 3641 | 0xe39 | Operation timedout on the FIPS card, please try again |
|
NSERR_SSL_SIMTIMEOUT | 3642 | 0xe3a | Operation timed out or repeated, please wait for 10 mins and redo the SIM/HA configuration steps. |
|
NSERR_SSL_NGFIPS_QFULL | 3643 | 0xe3b | FIPS card command queue full. Please try again later |
|
NSERR_SSL_NOMEM_VSVRSRVLISTNODE | 3644 | 0xe3c | Failed to allocate memory for CertkeyVserverServList Node. |
|
NSERR_SSL_CERTKEY_SIZE64 | 3645 | 0xe3d | Certificate with key size (modulus) that is not multiple of 512 bits is not supported |
|
NSERR_SNI_ATK | 3646 | 0xe3e | Host header field in the HTTP request does not match with the SNI domain name |
|
NSERR_SNI_NOHOSTHDR | 3647 | 0xe3f | Host header missing in the HTTP header for SNI enabled session |
|
NSERR_CRL_SHMEM_ALLOC_FAIL | 3648 | 0xe40 | Crl node allocation in the shared mem is failed |
|
NSERR_SSL_PE_NO_SET_UNSET | 3649 | 0xe41 | Set/Unset operation not supported for classic SSL polices |
|
NSERR_SSL_NOT_CTL_POL | 3650 | 0xe42 | Not a control policy |
|
NSERR_SSL_NOT_DATA_POL | 3651 | 0xe43 | Not a data policy |
|
NSERR_SSL_TYPE_REQD | 3652 | 0xe44 | Type is required |
|
NSERR_SSL_NOT_PI_POL | 3653 | 0xe45 | Advanced policy attributes specified with classic policy |
|
NSERR_SSL_PE_POL_POL_LBL | 3654 | 0xe46 | Cannot bind classic policy to policy label |
|
NSERR_SSL_CERT_MISSING_PARAM | 3655 | 0xe47 | Required parameters missing in the certificate. Please check the certificate for completeness |
|
NSERR_SSL_NOMEM_CERTKEY_OCSPRESP_LISTNODE | 3656 | 0xe48 | Failed to allocate memory for CertkeyOCSPRespList Node. |
|
NSERR_SSL_OCSP_DUPLICATE | 3657 | 0xe49 | An ocspResponder is already bound with the specified priority. |
|
NSERR_SSL_BIND_CP | 3658 | 0xe4a | Binding of SSL classic policy is not supported, use equivalent advanced SSL policy |
|
NSERR_SSL_ADD_CP | 3659 | 0xe4b | Adding SSL classic policy is not supported, use equivalent advanced rule |
|
NSERR_SSL_BUNDLE_IC_FILE_EXISTS | 3660 | 0xe4c | Certificate file for intermediate certificate already exists. |
|
NSERR_SSL_BUNDLE_SCERT_MISSING | 3661 | 0xe4d | Server certificate must be placed first in certificate bundle file. |
|
NSERR_SSL_BUNDLE_CERT_MISSING | 3662 | 0xe4e | No certificates present in the certificate bundle file. |
|
NSERR_SSL_BUNDLE_FAILED | 3663 | 0xe4f | Processing of certificate bundle file failed. |
|
NSERR_SSL_BUNDLE_PARSE_ERR | 3664 | 0xe50 | Unable to parse the certificate bundle file. |
|
NSERR_SSL_BUNDLE_MAX_CERT | 3665 | 0xe51 | Exceeded maximum Intermediate certificates limit of 9. |
|
NSERR_SSL_BUNDLE_MAX_KEY | 3666 | 0xe52 | Only one private-key is allowed in the certificate bundle file. |
|
NSERR_SSL_BUNDLE_IC_FILE_CREATE_FAILED | 3667 | 0xe53 | Intermediate certificate file creation failed. |
|
NSERR_SSL_SKIPCA_OPNOTPER | 3668 | 0xe54 | skipCA is not permitted for this entity. |
|
NSERR_SSL_ISSUER_MISMATCH | 3669 | 0xe55 | Certificate Issuer mismatch |
|
NSERR_SSL_SET_POLICY_ACTION_TYPE | 3670 | 0xe56 | Action type cannot be changed from the previous configured action type |
|
NSERR_SSL_DTLS_NOTSUPP | 3671 | 0xe57 | Virtual server of type DTLS is not supported on this platform |
|
NSERR_SSL_INVALID_CN_NAME | 3672 | 0xe58 | Invalid Common Name. |
|
NSERR_SSL_ECC_NOT_SUPPORTED | 3673 | 0xe59 | ECDHE ciphers supported only on FE SSL entities on VPX, MPX and BE MPX |
|
NSERR_SSL_NO_PROTOCOL_ENABLED | 3674 | 0xe5a | SSL or TLS protocols not enabled on the service. |
|
NSERR_DTLS_PROFILE_REFEXT | 3676 | 0xe5c | DTLS profile is referenced by a vserver or front-end service. |
|
NSERR_SSL_NO_ECC_CURVES | 3677 | 0xe5d | No ECC curves bound for ECDHE ciphers. |
|
NSERR_CRYPTODEV_MAX_LIMIT | 3678 | 0xe5e | Crypto Device count exceeds maximum available. |
|
NSERR_SSL_PROFILE_ATTACHED | 3679 | 0xe5f | Operation not permitted. Use set ssl profile for setting these parameters. |
|
NSERR_SSL_PROFILE_USED | 3680 | 0xe60 | Profile is being used by Virtual Server, Service or Monitor. |
|
NSERR_SSL_PROFILE_NOT_VAILD_PARAM | 3681 | 0xe61 | Specified parameters are not applicable for this type of SSL profile. |
|
NSERR_IMPORT_SSL_INVALID_DHFILE_ERROR_OBJECT | 3682 | 0xe62 | Import failed:DH file being imported is invalid. |
|
NSERR_IMPORT_SSL_INVALID_CRLFILE_ERROR_OBJECT | 3683 | 0xe63 | Import failed:CRL file being imported is invalid. |
|
NSERR_IMPORT_SSL_INVALID_CERTFILE_ERROR_OBJECT | 3684 | 0xe64 | Import failed:Certificate file being imported is invalid |
|
NSERR_IMPORT_SSL_INVALID_KEYFILE_ERROR_OBJECT | 3685 | 0xe65 | Import failed:Key file being imported is invalid |
|
NSERR_FIPSFW_FILEPATH | 3686 | 0xe66 | Invalid firmware file path |
|
NSERR_FIPSFW_FILEOPEN | 3687 | 0xe67 | Unable to open firmware file |
|
NSERR_FIPSFW_FILEIO | 3688 | 0xe68 | Read error occurred for firmware file |
|
NSERR_FIPSFW_FSTAT | 3689 | 0xe69 | Failed to get status of firmware file |
|
NSERR_FIPSFW_AUTH_FILEPATH | 3690 | 0xe6a | Invalid firmware signature file path |
|
NSERR_FIPSFW_AUTH_FILEOPEN | 3691 | 0xe6b | Unable to open firmware signature file |
|
NSERR_FIPSFW_AUTH_FILEIO | 3692 | 0xe6c | Read error occurred for firmware signature file |
|
NSERR_FIPSFW_AUTH_FSTAT | 3693 | 0xe6d | Failed to get status of firmware signature file |
|
NSERR_FIPSFW_BEGIN_ERROR | 3694 | 0xe6e | Firmware update process failed BEGIN command |
|
NSERR_FIPSFW_UPDATE_ERROR | 3695 | 0xe6f | Firmware update process failed UPDATE command |
|
NSERR_FIPSFW_END_ERROR | 3696 | 0xe70 | Firmware update process failed END command |
|
NSERR_FIPSFW_STATE_ERROR | 3697 | 0xe71 | Firmware update process failed, invalid state |
|
NSERR_FIPSFW_INVALID_CHUNK_TYPE | 3698 | 0xe72 | Firmware update process failed, invalid chunk type |
|
NSERR_SSL_OCSP_WITH_CK_HSMKEY | 3699 | 0xe73 | Configuration of OCSP signing certificate with external HSM key not supported. |
|
NSERR_SSL_HSMKEY_DEFLOCATION | 3700 | 0xe74 | Input HSM Key Simple file not present under the default directory /var/opt/nfast/kmdata/local/ |
|
NSERR_SSL_HSMKEY_IDENT_MISMATCH | 3701 | 0xe75 | HSM Key Name must be same as HSM Key Ident |
|
NSERR_SSL_HSMKEY_DTLS | 3702 | 0xe76 | HSM Key bind with DTLS Vserver is not supported. |
|
NSERR_SSL_HSMKEY_BUNDLE | 3703 | 0xe77 | Addition of certificate-bundle with external HSM Key is not supported. |
|
NSERR_CPE_EXPRESSION_PARTITION_INVALID | 3704 | 0xe78 | Classic expression is not supported in current partition. |
|
NSERR_AP_INVALID_EXPRESSION | 3705 | 0xe79 | Expression value not supported. |
|
NSERR_SSL_DH_BUSY | 3706 | 0xe7a | DH Param in use. Please try later... |
|
NSERR_FIPSFW22_MINKEYSIZE | 3707 | 0xe7b | Key size less than 2048 is not supported on FIPS Firmware Version 2.2. |
|
NSERR_SSL_MAXSAN | 3708 | 0xe7c | Maximum number of SANs reached |
|
NSERR_SSL_BADSNICERT | 3709 | 0xe7d | Bad SNI certificate |
|
NSERR_SSL_AESGCM_SHA2_NOT_SUPPORTED | 3710 | 0xe7e | SHA2 ciphers not supported on VPX and FIPS |
|
NSERR_SSL_NOCIPHERGRP | 3711 | 0xe7f | Cipher Group does not exist. |
|
NSERR_SSL_SVCVSR_NOT_FOUND | 3712 | 0xe80 | No SSL vserver/service found with this name. |
|
NSERR_SSL_DEF_DTLS_PROFILE | 3713 | 0xe81 | Cannot modify default DTLS profile. |
|
NSERR_SSL_NOSSLV2REDIRECTOPT_ON_FIPS | 3714 | 0xe82 | Sslv2 Redirect option is not permitted on MPX-FIPS platform. |
|
NSERR_SSL_OP_ON_NONFIPS_NOT_PERM | 3715 | 0xe83 | Operation permitted only on MPX-FIPS platform. |
|
NSERR_SSL_LOAD_KEYS | 3716 | 0xe84 | Loading of internal keys failed. |
|
NSERR_SSL_PASSWORD_DECODE | 3717 | 0xe85 | Decode of the encrypted passphrase failed. |
|
NSERR_SSL_NOCERT_FILE | 3718 | 0xe86 | Certificate file name not specified. |
|
NSERR_SSL_DEFAULT_CERT_DEL | 3719 | 0xe87 | Cannot delete internal default certificate. |
|
NSERR_SSL_FIPS_CERT | 3720 | 0xe88 | FIPS certificate cannot be bound as a CA certificate, install the certificate without the FIPS key. |
|
NSERR_SSL_CERTKEY_HSM | 3721 | 0xe89 | Cannot bind a certificate with HSM key to a service. |
|
NSERR_SSL_DEFAULT_CERT_BIND | 3722 | 0xe8a | Cannot bind internal default certificate. |
|
NSERR_SSL_CMD_DEPRECATED | 3723 | 0xe8b | Command deprecated, operation not applicable to this platform. |
|
NSERR_SSL_NO_LIC | 3724 | 0xe8c | Only export ciphers are allowed without proper SSL license. |
|
NSERR_SSL_DTLS_NA | 3725 | 0xe8d | Command arguments does not apply to vserver/service of type DTLS. |
|
NSERR_SSL_ECC_SUPPORT | 3726 | 0xe8e | ECC curve is not supported for this entity/platform. |
|
NSERR_SSL_PROFILE_FE | 3727 | 0xe8f | Cannot bind front-end profile to a back-end SSL service. |
|
NSERR_SSL_PROFILE_BE | 3728 | 0xe90 | Cannot bind back-end profile to a front-end SSL vserver. |
|
NSERR_SSL_OP_ON_FIPS_WOFW22_NOT_PERM | 3729 | 0xe91 | Operation not permitted on MPX-FIPS platform without FIPS firmware version 2.2 or higher. |
|
NSERR_SSL_NONSSL_VSERVER | 3730 | 0xe92 | Vserver is not of type SSL. |
|
NSERR_SSL_UDP_DTLS | 3731 | 0xe93 | Cannot bind policy to vserver of type DTLS. |
|
NSERR_SSL_TLS11_12_SUPPORT | 3732 | 0xe94 | Enabling of TLSv1.1/1.2 is not supported on this entity/platform. |
|
NSERR_SSL_HSM_KEY_SVC_SVCGRP | 3733 | 0xe95 | Binding of certificate with HSM key is not supported on back-end service, serviceGroup or monitors. |
|
NSERR_DTLS_PROFILE | 3734 | 0xe96 | Cannot bind DTLS profile to a SSL vserver. |
|
NSERR_SSL_PROFILE_NO_USABLE_CIPHERS | 3735 | 0xe97 | No usable ciphers configured for some of the SSL vserver/service binded to this profile |
|
NSERR_SSL_CIPHGRP_NO_USABLE_CIPHERS | 3736 | 0xe98 | No usable ciphers configured for some of the SSL vserver/service binded to this cipher group |
|
NSERR_SSL_PROFILE_UNSET_DEFAULT | 3737 | 0xe99 | Unsetting a default SSL Profile is not allowed |
|
NSERR_SSL_DEFAULT_PROFILE_ENABLED | 3738 | 0xe9a | Disabling ssl default profile is not allowed |
|
NSERR_SSL_PROFILE_DEFAULT_DISABLED | 3739 | 0xe9b | Operation not permitted. To do this Enable default ssl profile by setting set ssl parameter -defaultProfile E |
|
NSERR_SSL_PROFILE_DEFAULT_ENABLED | 3740 | 0xe9c | Operation not permitted. To do this Disable default ssl profile by setting set ssl parameter -defaultProfile D |
|
NSERR_SSL_CIPHER_EXIST_HIGHER_PRI | 3741 | 0xe9d | Specified cipher is already bound with higher priority |
|
NSERR_SSL_DEFAULT_PROFILE_PERM | 3742 | 0xe9e | Default ssl profile can not be removed |
|
NSERR_SSL_DH_SIZE_16B | 3743 | 0xe9f | DH params of size is not 16B aligned |
|
NSERR_SSL_NOCIPHERREDIRECTOPT | 3744 | 0xea0 | The cipher redirect option is not supported for SSL Service |
|
NSERR_SSL_NOCLIENTAUTHOPT | 3745 | 0xea1 | The client auth option is not supported for SSL Service |
|
NSERR_SSL_NOSSLV2REDIRECTOPT | 3746 | 0xea2 | The SSLv2 redirect option is not supported for SSL Service |
|
NSERR_SSL_NONONFIPSCIPHERSOPT | 3747 | 0xea3 | The nonFipsCiphers option is not applicable any more |
|
NSERR_SSL_NOCIPHERREDIRECTOPT_ON_FIPS | 3748 | 0xea4 | Cipher Redirect option is not permitted on MPX-FIPS platform. |
|
NSERR_SSL_NOSSL2PROTOOPT_ON_FIPS | 3749 | 0xea5 | Ssl2 protocol option is not permitted on MPX-FIPS platform. |
|
NSERR_SSL_CANNOT_BIND_VSERVER | 3750 | 0xea6 | Front end service cannot be bound to a vserver. |
|
NSERR_SSL_SERVERAUTHNOTSUPP | 3751 | 0xea7 | ServerAuth Operation is not supported for front end service. |
|
NSERR_SSL_SERVERAUTH_SNI_REQUIRED | 3752 | 0xea8 | Argument pre-requisite missing serverAuth == ENABLED or SNIEnable == ENABLED |
|
NSERR_SSL_CN_REQUIRED | 3753 | 0xea9 | Argument pre-requisite missing commonName |
|
NSERR_SSL_DTLSPROFNOTSUPP | 3754 | 0xeaa | Cannot set DTLS Profile Name for a ssl service. |
|
NSERR_SSL_PUSHENCNOTSUPP | 3755 | 0xeab | Push encryption trigger is not supported for SSL Service. |
|
NSERR_N3FIPS_MINKEYSIZE | 3756 | 0xeac | Key size less than 2048 is not supported on N3FIPS |
|
NSERR_N3FIPS_MAXKEYSIZE | 3757 | 0xead | Key size more than 3072 is not supported on N3FIPS |
|
NSERR_N3FIPS_MINEXPSIZE | 3758 | 0xeae | N3FIPS only supports F4(65537) as an exponent |
|
NSERR_SSL_OCSPNAMENOTSUPP | 3759 | 0xeaf | Ocsp responder name should not start with INTERNAL. |
|
NSERR_SSL_OCSP_NOT_VALID_PARAM | 3760 | 0xeb0 | Specified parameters are not applicable for this type of ocsp responder. |
|
NSERR_SSL_NOOCSPSTAP | 3761 | 0xeb1 | Ocsp stapling option is not supported for SSL Service. |
|
NSERR_SSL_CREATE_AIA_OCSP_RESP_FAILED | 3762 | 0xeb2 | Failed to create/bind Internal Ocsp responder(using certkey AIA URL). |
|
NSERR_N3FIPDEXUPGRADE | 3763 | 0xeb3 | N3FIPS VPX does not support upgrade firmware operation |
|
NSERR_N3FIP_MAXKEYNUM | 3764 | 0xeb4 | Maximum Fips keys limit reached |
|
NSERR_FIPSCARDCONFIGED | 3765 | 0xeb5 | Fips is already configured, please reset first to set fips again |
|
NSERR_N3FIPSCHANGELIC | 3770 | 0xeba | N3FIPS license is changed, please reboot the system |
|
NSERR_SSL_OCSP_SET_NOT_ALLOWED_ON_AIA | 3771 | 0xebb | Set operation on internal ocsp entity is not allowed |
|