| NSERR_CLNOTEXIST | 2448 | 0x990 | Cluster does not exist |
|
| NSERR_TOOMANYCLS | 2449 | 0x991 | This node is already added to another cluster |
|
| NSERR_RMLOCALNODE | 2450 | 0x992 | Local Node cannot be deleted |
|
| NSERR_BKPLANEENABLED | 2451 | 0x993 | Cluster Backplane is enabled on this interface |
|
| NSERR_LOCALNODE_NOTCONFIGURED | 2452 | 0x994 | Clustering cannot be enabled as the local node is not a member of the cluster. |
|
| NSERR_HACL_CANNOT_COEXIST | 2453 | 0x995 | Clustering and HA cannot coexist. |
|
| NSERR_CLACPKEYNOTCRT | 2454 | 0x996 | LACP key for Node/cluster is not correct |
|
| NSERR_CLNODE_EXIST | 2455 | 0x997 | already in cluster |
|
| NSERR_BKPLANEDISABLED | 2456 | 0x998 | Disabling Cluster backplane interface |
|
| NSERR_CLAGTHROUGHPUT | 2457 | 0x999 | Currently throughput settings are not allowed on CLAG |
|
| NSERR_LICMISMATCH | 2458 | 0x99A | License mismatch between Configuration Coordinator and local node |
|
| NSERR_CLIP_INVALIDNETMASK | 2459 | 0x99B | CLIP netmask should be 255.255.255.255. |
|
| NSERR_BKPLANELACPDELETE | 2460 | 0x99C | This is the last interface in LACP channel configured as backplane |
|
| NSERR_LINKSETMEMBER | 2461 | 0x99D | Interface/Channel is Linkset member. |
|
| NSERR_CONFIG_PARAM | 2462 | 0x99E | Setting up of netscaler parameter ignored using this command in HA/Cluster mode. Use set nsparam command for this purpose. |
|
| NSERR_CLIP_INVALIDPREFIXLEN | 2463 | 0x99F | CLIP prefix length should be 128. |
|
| NSERR_CLUSTER_L2NOTSUPP | 2464 | 0x9A0 | L2 Mode not supported in Cluster mode. |
|
| NSERR_LINKSET_ONEPERNODE | 2465 | 0x9A1 | Linkset can have only one Interface/Channel per Node |
|
| NSERR_LINKSET_NOTBOUND | 2466 | 0x9A2 | Interface/Channel not bound to Linkset |
|
| NSERR_LINKSET_IDINVALID | 2467 | 0x9A3 | Linkset name should be of form LS/ |
|
| NSERR_CLUSTER_NBNOTSUPP | 2468 | 0x9A4 | CloudBridge is not supported in Cluster mode. |
|
| NSERR_CLUSTER_VPNNOTSUPP | 2469 | 0x9A5 | SSLVPN is not supported in Cluster mode. |
|
| NSERR_CLUSTER_AAANOTSUPP | 2470 | 0x9A6 | AAA is not supported in Cluster mode. |
|
| NSERR_CLUSTER_IPSECNOTSUPP | 2471 | 0x9A7 | IPSEC is not supported in Cluster mode. |
|
| NSERR_LINKSET_LAMEMBER | 2472 | 0x9A8 | Interface part of a Channel |
|
| NSERR_CLIP_LOCALNODE_NOTCONFIGURED | 2473 | 0x9A9 | CLIP cannot be added as the local node is not a member of the cluster. |
|
| NSERR_CLVERSIONMISMATCH | 2474 | 0x9AA | Cluster version mismatch between Configuration Coordinator and local node |
|
| NSERR_CLUSTER_CMNOTSUPP | 2475 | 0x9AB | Connection Mirroring is not supported in Cluster mode |
|
| NSERR_ARP_CLAG_OWNERNODE_MANDATORY | 2476 | 0x9AC | Owner Node should be specified for CLAG. |
|
| NSERR_ARP_OWNERNODE_MANDATORY | 2477 | 0x9AD | Owner Node should be specified. |
|
| NSERR_NOOPCCO | 2478 | 0x9AE | Operation not permitted on the Configuration Coordinator. |
|
| NSERR_SPOTTED_CONFIG_PRESENT | 2479 | 0x9AF | Operation not permitted as the node is part of spotted entity configuration. |
|
| NSERR_NOT_CLUSTER_IP | 2480 | 0x9B0 | IP address should be a CLIP address. |
|
| NSERR_CLUSTER_NNRES | 2481 | 0x9B1 | Error in communication with other nodes in the cluster |
|
| NSERR_LAST_CLUSTER_IP_REMOVAL | 2482 | 0x9B2 | A NetScaler cluster must have a minimum of one cluster IP address. This is the last available cluster IP address and hence it cannot be deleted. |
|
| NSERR_CONFIG_PARAM_INVALID | 2483 | 0x9B3 | Configured Param(s) too small for Cluster. Parameter value(s) will be bumped to OVS node count. |
|
| NSERR_CLUSTER_INVALIDNODE | 2484 | 0x9B4 | Owner node value should be between 0 and 31, both inclusive. |
|
| NSERR_LRONCLACPONLY | 2485 | 0x9B5 | Link Redundancy can be set only in Cluster LACP Channels |
|
| NSERR_MULTIBIND_NOT_SUPPINCLUSTER | 2486 | 0x9B6 | Multiple Bindings in Single Bind Command not Supported in Cluster. |
|
| NSERR_CLUSTER_FISNAMES_DUPNOTALLOWED | 2487 | 0x9B7 | In a cluster setup, the FIS name on each node must be unique. |
|
| NSERR_CLUSTER_CLAG_NOLOCALINTF | 2488 | 0x9B8 | CLA cannot be bound to the FIS as the CLA does not contain a local interface. |
|
| NSERR_FIS_MAX_LIMIT | 2489 | 0x9B9 | An appliance can have a maximum of 64 failover interface sets (FIS). This appliance or ownernode (cluster) already has maximum number of allowable FIS. |
|
| NSERR_BOUND_TO_FIS | 2490 | 0x9BA | Interface bound to FIS. |
|
| NSERR_CHANNEL_OPEN_FAILED | 2491 | 0x9BB | Unable to open channel |
|
| NSERR_NOT_BOUND_TO_FIS | 2492 | 0x9BC | Interface not bound to this FIS |
|
| NSERR_CLUSTER_INC_NOTSUPP | 2493 | 0x9BD | Feature not supported when cluster is configured in INC mode |
|
| NSERR_CONFIG_NG_CHANGED | 4095 | 0xfff | Config NodeGroup changed, force cluster sync should be fired on newly added node to be in sync |
|
| NSERR_STRIPED_IP_EXIST | 2494 | 0x9BE | Striped SNIPs/MIPs must be removed when transitioning to cluster-inc |
|
| NSERR_WRONG_NG | 2495 | 0x9BF | All cluster nodes should be bound to DEFAULT_NG before transitioning to cluster-inc |
|
| NSERR_NG_REQUIRED | 2496 | 0x9C0 | The nodegroup parameter is mandatory when the -inc parameter is enabled |
|
| NSERR_NG_CHANGE | 2497 | 0x9C1 | NodeGroup can be changed only for transition from cluster to cluster-inc |
|
| NSERR_NG_INVALID | 2498 | 0x9C2 | Invalid nodegroup |
|
| NSERR_NOT_LAST_NODE | 2499 | 0x9C3 | The -flushall parameter can be enabled only when there is one node in the nodegroup |
|
| NSERR_MULTI_NG_BINDING_EXIST | 2500 | 0x9C4 | More than one Nodegroup has nodes bound to it |
|
| NSERR_INVALID_NC_CONFIG | 2501 | 0x9C5 | The owner group parameter is applicable only when the INC parameter is enabled on the cluster instance |
|
| NSERR_FIPSCL_CANNOT_COEXIST | 2502 | 0x9C6 | Clustering and FIPs configuration cannot coexist. |
|
| NSERR_LS_CLAG_INTF_SAME_NG | 2503 | 0x9C7 | All interfaces of LinkSet/CLAG should belong to same nodegroup |
|
| NSERR_NODE_BINDING_INC | 2504 | 0x9C8 | Node cannot be bound to Default nodeGroup on cluster-inc setup |
|
| NSERR_IP_OWNERDOWN_PARAM | 2522 | 0x9DA | OwnerDownResponse allowed only for spotted SNIP on cluster |
|
| NSERR_INVALID_LS | 2411 | 0x96b | Invalid linkset |
|
| NSERR_IP_ALREADY_OWNED | 2541 | 0x9ed | Cannot add ip address as the address is already owned by cluster or peer node |
|
| NSERR_LS_UNABLE_GET_VLAN | 2542 | 0x9ee | Unable to get the current vlan of this linkset. |
|
| NSERR_LS_NOT_BOUND_VLAN | 2543 | 0x9ef | Linkset not a member of this vlan |
|
| NSERR_CL_UNSUPPORTED_PROTO | 2544 | 0x9f0 | Retain connections on joining a new node is not supported for this protocol |
|
| NSERR_CL_UNSUPPORTED_IN_NCORE | 2545 | 0x9f1 | This feature/option is not supported in n-core |
|
| NSERR_NO_SETTING_PROP | 2546 | 0x9f2 | This setting will not be propagated to other nodes. |
|
