| NSERR_SLESSLB_LBMETHOD_NOTSUPPORTED | 1280 | 0x500 | Incompatible LB method for sessionless vserver |
|
| NSERR_SLESSLB_PERSIST_NOTSUPPORTED | 1281 | 0x501 | Incompatible persistence method for sessionless vserver |
|
| NSERR_SLESSLB_TYPE_NOTSUPPORTED | 1282 | 0x502 | Sessionless vserver must be of type ANY, DNS or UDP |
|
| NSERR_SLESSLB_MODE_NOTSUPPORTED | 1283 | 0x503 | Sessionless vserver must have MAC or IPTUNNEL mode set |
|
| NSERR_SLESSLB_SVC_USIPNOTSET | 1284 | 0x504 | Service bound to a sessionless vserver must have UseSourceIP mode enabled |
|
| NSERR_WILDCARDVIP_LBMETHOD_INVAL | 1286 | 0x506 | Invalid LB method for a wildcard vserver |
|
| NSERR_WILDCARDVIP_PERSIST_INVAL | 1287 | 0x507 | Invalid persistence policy for a wildcard vserver |
|
| NSERR_LB_SO_THRESHOLD | 1288 | 0x508 | Spill-over threshold should be a non-zero value |
|
| NSERR_CONNFAILOVER_USIP | 1289 | 0x509 | Service must have Use Source IP option set in order to be bound to a connection failover enabled virtual server |
|
| NSERR_CONNFAILOVER_SERVICE | 1290 | 0x50a | Connection failover can only be enabled on a virtual server of service type ANY |
|
| NSERR_LB_SO_DYNAMICCON_THRESHOLD | 1291 | 0x50B | Spill-over threshold cannot be set for dynamic connection spill-over method |
|
| NSERR_LB_SO_ADDRVIP | 1292 | 0x50C | DYNAMICCONNECTION spill-over cannot be set on a non-LB vserver |
|
| NSERR_CONNFAILOVER_NOTFOR_SLESS | 1293 | 0x50d | Connection Failover is not supported for sessionless lb vserver\\n |
|
| NSERR_NEWSVC_PERCENT_CAPPED | 1294 | 0x50e | Percentage value of requests capped at 100 |
|
| NSERR_SIP_NOCALLID | 1296 | 0x510 | Missing Call-ID header field |
|
| NSERR_SIP_NOVIA | 1297 | 0x511 | Missing Via header field |
|
| NSERR_SIP_NOCSEQ | 1298 | 0x512 | Missing CSeq header field |
|
| NSERR_SIP_NOTO | 1299 | 0x513 | Missing To header field |
|
| NSERR_SIP_NOFROM | 1300 | 0x514 | Missing From header field |
|
| NSERR_SIP_NOMAX_FORWARDS | 1301 | 0x515 | Missing Max-Forwards header field |
|
| NSERR_SIP_SERVICE_UNAVAILABLE | 1302 | 0x516 | Service unavailable |
|
| NSERR_SVC_NOT_BOUND | 1303 | 0x517 | Service not bound to Vserver |
|
| NSERR_SVCTYPE_MISMATCH | 1304 | 0x518 | Service type mismatch between the vserver and service |
|
| NSERR_CH_CON_NOT_ALLOWED | 1305 | 0x519 | CONNECTION header cannot be set |
|
| NSERR_CH_INCOMPLETE_HDR | 1312 | 0x520 | Custom Header string should end with CRLF |
|
| NSERR_SPILLOVERDISABLED | 1313 | 0x521 | No spillover on the vserver due to max client setting 0 on a bound service |
|
| NSERR_MAXTIMEEXCEEDED | 1314 | 0x522 | Maximum time value for interval or responsetimeout or downtime is exceeded, rounding to maximum |
|
| NSERR_SCINVALPROTO | 1315 | 0x523 | Cannot bind SC policy to non-HTTP service or vserver |
|
| NSERR_ROOTREC | 1316 | 0x524 | Atleast one nameserver record should exist for the root domain |
|
| NSERR_ROOT_GLUEREC | 1317 | 0x525 | Root domain nameserver address record should have atleast one ip address |
|
| NSERR_VIPINSERT_NOT_SUPPORTED | 1356 | 0x54c | Vserver IP and port header insertion option not supported on this vserver. |
|
| NSERR_VSVR_ALRDY_BOUND | 1318 | 0x526 | This vserver is already bound to a WLM |
|
| NSERR_INVALID_WLM_BINDING | 1319 | 0x527 | Only LB vservers are allowed to bound to WLM |
|
| NSERR_VSVR_NOT_BOUND | 1320 | 0x528 | Vserver not bound to WLM |
|
| NSERR_WLM_EXISTS | 1321 | 0x529 | WLM already configured on this IP, port |
|
| NSERR_INVALID_TIMEOUT | 1322 | 0x52a | Invalid persistence timeout: default timeout assigned |
|
| NSERR_CONNFAILOVER_INCMODE | 1323 | 0x52b | Stateful connection failover cannot be enabled in INC mode |
|
| NSERR_CONNFAILOVER_TCPB | 1324 | 0x52c | Stateful connection failover cannot be enabled on a vserver that binds services with TCP buffering enabled |
|
| NSERR_CONNFAILOVER_TCPB_SVC_BIND | 1326 | 0x52e | Service with TCP buffering enabled cannot be bound to a vserver with stateful connection failover enabled |
|
| NSERR_CONNFAILOVER_TCPB_SVC_PARAM | 1327 | 0x52f | TCP buffering cannot be enabled on a service bound to a vserver with stateful connection failover enabled |
|
| NSERR_CONNFAILOVER_SERVICE_STATEFULL | 1328 | 0x530 | Stateful connection failover cannot be enabled on a vserver of this service type |
|
| NSERR_CONNFAILOVER_SSL_SVC_BIND | 1329 | 0x531 | SSL TCP service cannot be bound to a TCP vserver with stateful connection failover enabled |
|
| NSERR_CONNFAILOVER_HA_INC_NODE | 1330 | 0x532 | Ha node with INC mode enabled cannot be added to the system that has vserver(s) with stateful connection failover enabled |
|
| NSERR_CONNFAILOVER_SSL_SVC | 1331 | 0x533 | Stateful connection failover cannot be enabled on a vserver that binds services of type SSL_TCP |
|
| NSERR_INVALID_PERSISTENCE | 1332 | 0x534 | Invalid Persistence type |
|
| NSERR_RTSPSESSION_INVALID | 1333 | 0x535 | Invalid RTSP session entry |
|
| NSERR_LB_METHOD_SAMEAS_BACKUP_METHOD | 1334 | 0x536 | Backup load balancing method cannot be the same as the primary load balancing method |
|
| NSERR_SERVER_EXIST | 1335 | 0x537 | Server already exists |
|
| NSERR_LB_SO_HEALTH | 1336 | 0x538 | HEALTH spill-over cannot be set on a non-LB vserver |
|
| NSERR_REQ_RULE_MISSING | 1337 | 0x539 | Request Rule is required, when Response rule is specified. |
|
| NSERR_CONNFAILOVER_BINDLO | 1338 | 0x53a | Loopback service cannot be bound to vserver with connection failover enabled \\n |
|
| NSERR_CONNFAILOVER_SETWITHLO | 1339 | 0x53b | Connection Failover cannot be set to STATEFUL/STATELESS on vserver with bound loopback service\\n |
|
| NSERR_REDIRECT_URL_NOT_APPLICABLE | 1340 | 0x53c | Redirect URL cannot be configured on this vserver. |
|
| NSERR_STATEFUL_CONNFAILOVER_IPV6 | 1341 | 0x53d | Stateful connection failover cannot be enabled on an IPv6 vserver |
|
| NSERR_CONNFAILOVER_NOT_SUPPORTED | 1342 | 0x53e | Connection Failover is not supported for pattern based vservers |
|
| NSERR_NOBIND_ONPUSH | 1343 | 0x53f | Bindings not allowed on push vserver |
|
| NSERR_PUSH_VSVR | 1344 | 0x540 | Option cannot be set on push vserver |
|
| NSERR_ONLY_HTTPSSL | 1345 | 0x541 | Option can only be set on http/ ssl vserver |
|
| NSERR_PUSH_BIND_EXISTS | 1346 | 0x542 | A push vserver is already bound. Unbind before binding new vserver |
|
| NSERR_SET_PUSHVS_ONLY | 1347 | 0x543 | Push vserver should be of type push or ssl_push only |
|
| NSERR_SLESS_NO_SUPPORT | 1348 | 0x544 | Not supported for sessionless vservers |
|
| NSERR_CONNFAILOVER_V6SERVICE | 1349 | 0x545 | Connection Failover cannot be set to STATEFUL on vserver with IPv6 services bound |
|
| NSERR_CONNFAILOVER_VSERVER | 1350 | 0x546 | IPV6 service cannot be bound to vserver with connection failover set to STATEFUL |
|
| NSERR_LISTEN_POLICY_BIND | 1351 | 0X547 | Error in binding listen policy to vserver(normal vserver already present) |
|
| NSERR_NO_LISTEN_POLICY_FOR_DUMMYVS | 1352 | 0x548 | Cannot bind listen policy to dummy vservers |
|
| NSERR_LISTEN_POLICY_BIND_PRESENT | 1353 | 0X549 | Error in binding listen policy to vserver(vserver with new priority already present) |
|
| NSERR_NO_LISTEN_PRI | 1354 | 0X54a | Error in binding listen priority to normal vserver |
|
| NSERR_NORMAL_VS_NONE_LISTENPOL | 1355 | 0x54b | The vserver already has None Listen Policy\\n |
|
| NSERR_NO_LISPRI_FOR_NONE_LISPOL | 1357 | 0x54d | None listenpolicy doesnot have listen priority\\n |
|
| NSERR_INVALID_POLICY_STRING | 1358 | 0x54e | Invalid listenpolicy entered\\n |
|
| NSERR_NODATALENOFFFORVS | 1359 | 0x54f | Dataoffset and datalength are not required for this vserver\\n |
|
| NSERR_LBGRPPERSISWITHRDP | 1285 | 0x505 | Persistency is not applicable for RDP vserver or LB group which has RDP vserver part of it |
|
| NSERR_CS_SOTHRESHOLD | 1370 | 0x55a | Spillover threshold must be given with spillover method in Content Switching vserver |
|
| NSERR_INVALID_INSERTVSERVERIPPORT | 1392 | 0x570 | V6TOV4MAPPING is not applicable to ipv4 vserver |
|
| NSERR_LB_SERVER_NOTEXIST | 1388 | 0x56c | The Target LB Vserver does not exist |
|
| NSERR_BOUNDTO_CSACT | 1371 | 0x55b | The LB Vserver referred by Content Switching action cannot be removed |
|
| NSERR_BOUNDTO_CSPOLICY | 1372 | 0x55c | The Content Switching Action bound to Content Switching Policy cannot be removed |
|
| NSERR_INVALID_MULTIPLEBIND | 1373 | 0x55d | Multiple Bind not supported for Content Switching Advanced policies without action |
|
| NSERR_CSPOLICY_HASACTION | 1374 | 0x55e | LB vserver/gotoPriorityExpression/invoke not allowed during bind when content swtiching policy already has an action. |
|
| NSERR_CS_NOTSUPPORT_LB | 1375 | 0x55f | The Protocol of given LB vserver is not supported by Content Switching action |
|
| NSERR_ACTION_NOTNOOP_CS | 1386 | 0x56a | Do not provide gotoPriorityExpression/invoke because policy has action |
|
| NSERR_CSPOLICY_NOACTION | 1387 | 0x56b | Either LB vserver or GotoPriorityExpression or Invoke must be provided while binding a Content Switching policy without action. |
|
| NSERR_CSPEPOLICY_SETNOACTION | 1389 | 0x56d | Content Switching classic policy does not support action |
|
| NSERR_POLICY_USED_FOR_INVOKE | 1390 | 0x56e | Do not give target LB beacuse the policy has been bound to multiple entities |
|
| NSERR_SPECIFY_BACKUP_NODE | 1393 | 0x571 | Please specify the backup node. |
|
| NSERR_SAME_NODES | 1394 | 0x572 | Owner and backup nodes need to different. |
|
| NSERR_INCOMPATIBLE_POLICY_SERVER_TYPE | 1391 | 0x56f | Content switching vserver service type is not compatible with given policy expression |
|
| NSERR_PEPOLICY_BIND_NOTALLOWED | 1395 | 0x573 | Binding of classic content switching policy to content switching policylabel is not allowed |
|
| NSERR_TCPKA_IDLETIME_TOO_LOW | 1396 | 0x574 | Connection idle time cannot be lower than keep-alive probe interval |
|
| NSERR_OWNER_NODE_NOT_IN_CLUSTER | 1397 | 0x575 | Owner node is not in the cluster config or is NOT ACTIVE |
|
| NSERR_BACKUP_NODE_NOT_IN_CLUSTER | 1398 | 0x576 | Backup node is not in the cluster config or is NOT ACTIVE |
|
| NSERR_SPOTTED_VSERVER_NOT_SUPPORTED_IN_STANDALONE | 1399 | 0x577 | Spotted vserver configuration not supported in standalone or HA deplyoment |
|
| NSERR_SPOTTED_CONFIG_NO_MATCH | 1400 | 0x578 | Spotted config of the backup verser does not match the vserver |
|
| NSERR_OPTION_NOT_SUPPORTED | 1401 | 0x579 | Skip persistency is supported only for ANY and UDP service types |
|
| NSERR_OPTION_NOT_SUPPORTED_IP | 1402 | 0x57a | BYPASS is not supported for IP based vservers |
|
| NSERR_OWNER_NODE_NOT_SET | 1403 | 0x57b | Owner node should be specified for cluster |
|
| NSERR_INVALID_RENAME | 1404 | 0x57c | Rename is supported only for Advanced policies |
|
| NSERR_INVAL_LOCAL_NAMSVR_TYPE | 1405 | 0x57d | Only UDP based local nameservers are allowed |
|
| NSERR_INVALID_TFTPORT | 1406 | 0x57e | Invalid port for tftp vserver |
|
| NSERR_NO_RENAME | 1407 | 0x57f | No Rename Supported |
|
| NSERR_USE_BINDCR_CMD | 88 | 0x58 | Use Bind CR command to bind CR Vserver instead of Bind CS |
|
| NSERR_LBREFFERED_IN_CSBINDING | 1409 | 0x581 | Cannot remove LB Vserver which is reffered in CS policy bindings |
|
| NSERR_DEFAULTLB_NOT_BOUND | 1410 | 0x582 | default LB mentioned is not bound |
|
| NSERR_NG_BIND_ENTITY | 1411 | 0x583 | Error binding the node group to an entity |
|
| NSERR_ENTITY_BOUND_TO_ANOTHER_NG | 1412 | 0x584 | The specified entity is already bound to a different node group |
|
| NSERR_ENTITY_ALREADY_BOUND | 1413 | 0x585 | The specified entity is already bound to this node group |
|
| NSERR_ENTITY_NOT_BOUND_TO_NG | 1414 | 0x586 | The specified entity is not bound to any node group |
|
| NSERR_NG_NOT_FOUND | 1415 | 0x587 | Nodegroup is not found |
|
| NSERR_NG_HAS_BINDINGS | 1416 | 0x588 | Nodegroup cannot be deleted, it has entities bound to it |
|
| NSERR_VSERVER_CANNOT_BIND | 1417 | 0x589 | Vserver cannot bind to the nodegroup |
|
| NSERR_VSERVER_CANNOT_UNBIND | 1418 | 0x58a | Vserver cannot unbind to the nodegroup |
|
| NSERR_NG_CANNOT_BE_STRICT | 1419 | 0x58b | Nodegroup cannot be made strict as there are no nodes bound to it, but entities are bound |
|
| NSERR_NG_STRICT_AND_ZERODEPTH | 1420 | 0x58c | Cannot bind an entity to a strict nodegroup with no nodes bound to it |
|
| NSERR_UNBINDING_LAST_NODE_FROM_STRICT_NG | 1421 | 0x58d | Cannot unbind the last node from a strict nodegroup with entities bound to it |
|
| NSERR_NG_ALREADY_ADDED | 1422 | 0x58e | Nodegroup is already added |
|
| NSERR_NG_ENTITY_NOMEM | 1423 | 0x58f | No memory to establish entity to nodegroup association |
|
| NSERR_NG_MAX_CONFIGURED | 1424 | 0x590 | Cannot add nodegroup; maximum number of nodegroups already added |
|
| NSERR_INVAL_CS_ACTION | 1425 | 0x591 | Action given is not a CS action |
|
| NSERR_SET_CSACTION_DISALLOWED | 1426 | 0x592 | Set disallowed for CS action from Target LB/targetVserver to Target Expression and vice versa |
|
| NSERR_RETAIN_VLAN | 1427 | 0x593 | macmoderetainvlan applicable only for wildcard(IP and port) macmode vserver |
|
| NSERR_BIND_BDGGROUP_SYNCVLAN | 1428 | 0x594 | Sync vlan cannot be bound to bridgegroup |
|
| NSERR_DEL_SYNCVLAN | 1429 | 0x595 | Sync vlan cannot be deleted |
|
| NSERR_CSPEPOL_PARTITION_NOT_ALLOWED | 1430 | 0x596 | Current NON-default partition only supports Advanced Polices. |
|
| NSERR_LESSTHAN_PPE | 1438 | 0x59e | Max/Min Reusepool connections should be greater than or equal to running Packet Engines. |
|
| NSERR_MCLIMITS | 1295 | 0x50f | Dummy error to avoid issues when upgrade done from 9.3. |
|
| NSERR_SIP_BAD_REQUEST | 1431 | 0x597 | Invalid SIP request. |
|
| NSERR_SIP_NO_CONTENT_LEN | 1432 | 0x598 | No content length present. |
|
| NSERR_SIP_RET_MAX_INCOM_LEN | 1433 | 0x599 | SIP InComp max limit reached. |
|
| NSERR_SIP_RET_RETRY | 1434 | 0x59a | SIP packet retry. |
|
| NSERR_SIP_RET_NO_MEM | 1435 | 0x59b | SIP no memory available. |
|
| NSERR_SIP_RET_HEADER_NOT_COMPLETE | 1436 | 0x59c | Incomplete SIP headers. |
|
| NSERR_SIP_RET_FAILURE | 1437 | 0x59d | SIP operation failed. |
|
