Download full document:

CLI ERRORS

CLI ERRORS

Error CodeError Code(Decimal)Error Code(Hex)Error Message
NSERR_TCPCONNFAIL10240x400Connection failed
NSERR_LOGINFAIL10250x401Login failed
NSERR_NOLOGIN10260x402Not logged in
NSERR_AUTHTIMEOUT10270x403Not logged in or connection timed out
NSERR_NOT_PRIMARY10280x404You are connected to a secondary node; configuration changes made in this session will not be propagated to, or saved on, other nodes
NSERR_REMOTEOP10290x405Operation cannot be performed from remote login
NSERR_CONNLOST10300x406Connection with NetScaler lost
NSERR_RPCDATAMISMATCH10310x407Communication error (RPC data-size mismatch)
NSERR_RPCBADREPLY10320x408Communication error (bad RPC reply)
NSERR_UNABLETOPROMPT10330x409Unable to display secondary prompt
NSERR_LOGIN_CHALLENGED10340X40ALogin challenged
NSERR_LOGOUT_SAVE10350X40BYou are leaving without saving changes. Save changes now (Y/N)? [N]:
NSERR_CLEAR_CONFIG10360X40CAre you sure you want to clear the configuration(Y/N)? [N]:
NSERR_REBOOT10370X40DAre you sure you want to restart NetScaler (Y/N)? [N]:
NSERR_SHUTDOWNNS10380X40EAre you sure you want to completely stop NetScaler (Y/N)? [N]:
NSERR_REBOOT_SAVE10390X40FConfiguration not Saved. Are you sure you want to restart NetScaler (Y/N)? [N]:
NSERR_USERABORT10400x410User requested abort
NSERR_EOF10410x411EOF
NSERR_INTERRUPT10420x412Interrupted
NSERR_INTERNAL10430x413Internal error
NSERR_NOT_CLIP10440x414You are connected to NSIP of a cluster node; configuration changes made in this session will not be propagated to, or saved on, other cluster nodes
NSERR_EULA_NOTACCEPTED10450x415End User License Agreement not accepted. Login from CLI/GUI to accept it.
NSERR_STRMAXLEN_25510480x418String length exceeds maximum. Allowed maximum length is 255 bytes.
NSERR_STRMAXLEN_3210490x419String length exceeds maximum. Allowed maximum length is 32.
NSERR_NOPREFIX_LENGTH10500x41APrefix length must be given with network
NSERR_INVALIDPOLLVAL10510x41BMinpoll value should not be greater than maxpoll
NSERR_SHELL_ACCESS10520x41CUser has shell access
NSERR_NORESPONSE10560x420No response from NetScaler
NSERR_IOERROR10570x421I/O error
NSERR_ENV10580x422Environment error
NSERR_CMDSFAILED10590x423Some commands failed
NSERR_ALLCMDSFAILED10600x424All commands failed
NSERR_INVALID_TCP_OPTION_TYPE10610x425Invalid tcp option type value. Allowed type values are 0 to 254
NSERR_LICEXPIRED10660x42AFeatures(s) license expired
NSERR_FEATDISABLED10670x42BFeature(s) not enabled
NSERR_MAXLIMIT10720x430Maximum resource limit reached
NSERR_SET_NOSUPPORT10730x431Set operation not supported
NSERR_INVALIDVALUE10740x432Invalid value
NSERR_INVALIDNAME10750x433Invalid name; names must begin with an alphanumeric character or underscore and must contain only alphanumerics, _, #, ., , :, @, = or -
NSERR_INVALIDPASSWORD10760x434Invalid password. Password must contain atleast one lower case character, one upper case character, one numeric character and one special character when strong password is enabled.
NSERR_INVALIDMINPASSWORDLENGTH10770x435Minimum password length should be greater than or equal to 4 when strong password is enabled
NSERR_ENABLINGPASSWORDCOMPLEXITY10780x436Strong Password now enabled. Please ensure all the existing user passwords adhere to this restriction. Minimum Password Length is set to 4 as default.
NSERR_INVALIDPASSWORDLENGTH10790x437Password length should adhere to minimum password length value in system parameter settings.
NSERR_CANNOTSETMINPASSWORDLENGTH10800x438Strong Password needs to be enabled to set the Minimum Password Length value.
NSERR_NOSUCHCMD10880x440No such command
NSERR_CMDAMBIGUOUS10890x441Ambiguous command name
NSERR_NOSUCHARG10900x442No such argument
NSERR_ARGVALMISSING10910x443Required argument value missing
NSERR_ARGSMUTEX10920x444Arguments cannot both be specified
NSERR_ARGPREREQ10930x445Argument pre-requisite missing
NSERR_ARGSTOOFEW10940x446Too few arguments
NSERR_ARGMISSING10950x447Required argument missing
NSERR_ARGORDER10960x448Argument(s) out of order
NSERR_ARGVALBAD10970x449Invalid argument value
NSERR_ARGVALSEQ10980x44AArguments cannot have the same value
NSERR_ARGAMBIGUOUS10990x44BAmbiguous argument name
NSERR_SYNCGSLBCONFIG11000x44CPlease confirm whether you want to sync-config (Y/N)? [N]:
NSERR_SYNCGSLBCONFIG_WARN11010x44DSyncing config may cause configuration loss on other site.
NSERR_ARGVALSNEQ11040x450Arguments must have the same value
NSERR_ARGVALAMBIGUOUS11050x451Ambiguous argument value
NSERR_STRMAXLEN11060x452String length exceeds maximum
NSERR_STRMINLEN11070x453String too short
NSERR_INTMAXVAL11080x454Integer value exceeds maximum
NSERR_INTMINVAL11090x455Integer value below minimum
NSERR_INVALIDIP11100x456Invalid IP address
NSERR_INVALIDNETMASK11110x457Invalid netmask
NSERR_TOOMANYVALS11120x458Argument has too many values
NSERR_BADRANGE11130x459Range minimum exceeds range maximum
NSERR_EXPRQUOTES11140x45AExpression must be enclosed in quotes
NSERR_BADQUOTES11150x45BUnmatched quote
NSERR_INVALIDRANGE11160x45CInvalid range specification
NSERR_MISMATCHRANGES11170x45DRanges are different sizes
NSERR_MULTIRANGES11180x45EOnly one range allowed per argument
NSERR_NOMATCHCHAR11190x45FUnmatched character
NSERR_NEEDREBOOT11200x460The configuration must be saved and the system rebooted for these settings to take effect
NSQ_SAVECONFIG11210x461Do you want to save the new configuration?
NSERR_NOTSAVED11220x462The configuration changes were not saved - they will be lost on the next reboot
NSERR_CMDEXEC11230x463Error(s) occurred - some or all changes may not be applied
NSQ_REBOOT11240x464Do you want to reboot the system now?
NSERR_NOREBOOT11250x465The configuration changes will not take effect until the system is rebooted
NSERR_PGMFAILED11260x466External program failed
NSERR_CTXMODE11270x467Contextual CLI mode
NSERR_CMDINCOMPLETE11280x468Incomplete command
NSERR_CMDOUTOFCTX11290x469Command not valid here
NSERR_CONFIGSAVED11300x46AThe running configuration has been saved
NSERR_CONFIGCLEARED11310x46BThe running configuration has been cleared
NSERR_REBOOTING11320x46CNetScaler is rebooting now
NSERR_NOCONFIGSAVE11330x46DThe running configuration has not changed
NSERR_REGEXNOANCHOR11350x46FFirst character of regular expression must be ^
NSERR_REGEXNOMATCH11360x470Regular expression does not match
NSERR_REGEXINVALID11370x471Invalid regular expression
NSERR_REGEXNOTALLOWED11380x472Regular expression not allowed
NSERR_REGEXNOCMD11390x473No matches
NSERR_INVALIDIPV6_FORMAT11400x474Invalid IPv6 address
NSERR_INVALIDIPV6_TWO_DOUBECOLON11410x475Double-colon can appear only once in an IPv6 address
NSERR_INVALIDIPV6_NOPREFIX_LENGTH11420x476Prefix length must be given with an IPv6 address
NSERR_INVALIDIPV6_PREFIX_VALUE11430x477Prefix length must be in the range of 0-128
NSERR_TERMNAMEINVALID11440x478Invalid term name
NSERR_TERMINVALID11450x479Invalid syntax in term
NSERR_FORCEFAILOVER11460x47aPlease confirm whether you want force-failover (Y/N)? [N]:
NSERR_FORCEFAIL_HEALTH_WARN11470x47bForce Failover may cause configuration loss, peer health not optimum. Reason(s):
NSERR_HELLOTIME_MULTIPLE11480x47cInvalid value. Hellotime Interval must be a multiple of 200
NSERR_FORCESYNCSAVE11490x47dDo you want to save the config after sync (Y/N)? [Y]:
NSERR_ERROUTFILENAME11500x47eCharacter / not allowed in outfilename
NSERR_RNATIPDEL11510x47faddress is bound to rnat config, can not be removed
NSERR_INVALIDALIAS11520x480Invalid alias
NSERR_NOSUCHALIAS11530x481No such alias
NSERR_ALIASEXISTS11540x482Alias already exists
NSERR_NOSUCHFILE11550x483No such file
NSERR_NOTREGFILE11560x484Not a file
NSERR_DEPRCMD11570x485Command deprecated
NSERR_DEPRARG11580x486Argument deprecated
NSERR_NOTLOGFILE11590x487Not a NetScaler log file
NSERR_NOPLENFORIPV6RANGE11600x488Prefix length cannot be specified for an IPv6 range
NSERR_INVALIDINT11610x489Integer not in range
NSERR_CMDAMBIGUOUS_USECOMPLETIONSOPTIONS11620x48AAmbiguous (use cmd completion for options)
NSERR_METADATA_INVAL_ENTITYTYPE11630x48BInvalid Entity Type
NSERR_SETNOTEXIST11640x48Cset operation does not exist
NSERR_SETARGNOTEXIST11650x48dset operation for one of the modified argument does not exist
NSERR_INVALID_DS11660x48eInvalid datasource
NSERR_NOSUCHCOUNTER11670x48FNo such counter
NSERR_INVALIDIPMASK11680x490Invalid IP address mask
NSERR_INVALIDIPPAT11690x491Invalid IP address pattern
NSERR_BADRC11700x492Unexpected return code
NSERR_INVALIDRANGETYPE11710x493Inappropriate range values for value type
NSERR_INVALIDRANGEVAL11720x494Invalid range value
NSERR_INVALIDIPV6_PREFIX_LENGTH11730x495Prefix length must not be given
NSERR_ENTITYDELETE_FAIL11740x496Can not delete active entity
NSERR_DONE11750X497This is the last result
NSERR_RNATIPDEL211760x498An RNAT address requires an IP address to exist
NSERR_INCOMPATIBLEIP11810x49dPrivate IP and public IP must be either IPv4 or IPv6
NSERR_TRANSCR_IP11820x49eFor transparent CR vserver, you cannot specify IP address
NSERR_PASSWORD_MISMATCH11830x49fPasswords entered do not match
NSERR_LEADING_TRAILING_SPACES10530x41dLeading or Trailing spaces in string
NSERR_SAVENOTDONE10540x41eThe running configuration is not saved