| NSERR_PXY_CACHE_HMG | 512 | 0x200 | All caches in a content group should be of the same type |
|
| NSERR_PXY_RM_LAST_MEMT | 513 | 0x201 | Cannot remove last map entry from the table; remove the map table instead |
|
| NSERR_CSW_INS_INVAL_PFX | 514 | 0x202 | Invalid prefix specified in the URL |
|
| NSERR_PENG_EXPR_IVAL_NAME | 515 | 0x203 | Invalid expression name |
|
| NSERR_CSW_BIG_URL | 516 | 0x204 | URL specified is too long - maximum is 208, including . and * |
|
| NSERR_CSW_BIG_PFX | 517 | 0x205 | Prefix specified is too long - maximum is 199, excluding * |
|
| NSERR_CSW_BIG_SFX | 518 | 0x206 | Extension specified is too long, maximum is 8 |
|
| NSERR_CSW_INVAL_SFX | 519 | 0x207 | Extension is invalid |
|
| NSERR_EXPR_NOMETHOD | 520 | 0x208 | Invalid method name |
|
| NSERR_EXPR_NOURLTOKENS | 521 | 0x209 | Invalid HTTP URL tokens |
|
| NSERR_EXPR_NOVERSION | 522 | 0x20A | Invalid HTTP version |
|
| NSERR_EXPR_NOHDR | 523 | 0x20B | Invalid HTTP header |
|
| NSERR_EXPR_NOCACNTL | 524 | 0x20C | Invalid cache-control value |
|
| NSERR_EXPR_NOPRAG | 525 | 0x20D | Invalid pragma value |
|
| NSERR_EXPR_NOQUERY | 526 | 0x20E | Invalid query string |
|
| NSERR_EXPR_NOQUAL | 527 | 0x20F | Invalid qualifier |
|
| NSERR_ACTION_INUSE | 528 | 0x210 | Action name is already in use |
|
| NSERR_ACTION_HDR_INVAL | 529 | 0x211 | Invalid header |
|
| NSERR_URLQ_INVAL | 530 | 0x212 | ? |
|
| NSERR_UNDEF_ACTION | 531 | 0x213 | Action directive or qualifier is not valid |
|
| NSERR_CPE_INUSE | 532 | 0x214 | Policy name is already in use |
|
| NSERR_CPE_REQACT_INVAL | 533 | 0x215 | Request action is not valid |
|
| NSERR_CPE_RSPACT_INVAL | 534 | 0x216 | Response action is not valid |
|
| NSERR_CPE_REQRULE_INVAL | 535 | 0x217 | Request rule is not valid |
|
| NSERR_CPE_RSPRULE_INVAL | 536 | 0x218 | Response rule is not valid |
|
| NSERR_ACTION_DEFINVAL | 537 | 0x219 | Default actions cannot be removed |
|
| NSERR_ACTION_NOTPRESENT | 538 | 0x21A | Action does not exist |
|
| NSERR_PXY_INVAL_SERVICETYPE | 539 | 0x21B | Invalid service type for virtual server |
|
| NSERR_CACHEPOLICY_INUSE | 540 | 0x21C | Caching policy name is already in use |
|
| NSERR_CACHEGROUP_INTERNAL | 543 | 0x21F | Built-in content groups cannot be removed |
|
| NSERR_CPE_INVAL | 544 | 0x220 | Policy name is invalid |
|
| NSERR_EXPR_NOLEN | 545 | 0x221 | URL length is not valid |
|
| NSERR_DNSWAIT | 546 | 0x222 | ? |
|
| NSERR_GW_TIMEOUT | 547 | 0x223 | ? |
|
| NSERR_CSWDMN_INUSE | 548 | 0x224 | Domain is already hosted by another server |
|
| NSERR_CSWDMN_PLCY_EXIST | 549 | 0x225 | ? |
|
| NSERR_ACTION_NOMOD_HDR | 550 | 0x226 | Action has missing argument |
|
| NSERR_EXPR_INVAL_OPERATOR | 551 | 0x227 | Invalid operator for the qualifier |
|
| NSERR_EXPR_DEF_REM_INVAL | 552 | 0x228 | Default expression cannot be removed |
|
| NSERR_EXPR_TOOMANY | 553 | 0x229 | Expression limit reached |
|
| NSERR_ACTION_TOOMANY | 554 | 0x22A | Action limit reached |
|
| NSERR_CSWPOLICY_TOOMANY | 555 | 0x22B | CS policy limit reached |
|
| NSERR_CRDPOLICY_TOOMANY | 556 | 0x22C | CR policy limit reached |
|
| NSERR_MAPPOLICY_TOOMANY | 557 | 0x22D | Map policy limit reached |
|
| NSERR_FILTPOLICY_TOOMANY | 558 | 0x22E | Filter policy limit reached |
|
| NSERR_CACHEPOLICY_TOOMANY | 559 | 0x22F | Integrated cache policy limit reached |
|
| NSERR_CACHEGROUP_TOOMANY | 560 | 0x230 | Integrated cache content group limit reached |
|
| NSERR_CACHEPARAM_MEMALLOC_FAILED | 561 | 0x231 | Unable to allocate specified amount of memory |
|
| NSERR_CACHEGROUP_INUSE | 562 | 0x232 | Content group name is already in use |
|
| NSERR_CACHEGROUP_EXPCONFLICT | 563 | 0x233 | Expiry times conflict |
|
| NSERR_CACHEPARAM_INVAL | 564 | 0x234 | Cache parameter is invalid |
|
| NSERR_CACHEGROUP_PARAM_INVAL | 565 | 0x235 | Invalid invalidation parameter |
|
| NSERR_CACHEGROUP_QUERY_INVAL | 566 | 0x236 | Invalid query string |
|
| NSERR_ACTION_INVAL | 567 | 0x237 | Action name is invalid |
|
| NSERR_EXPR_DEF_SET_INVAL | 568 | 0x238 | Default expression cannot be set |
|
| NSERR_CACHEGROUP_RESSZ_MIN_GT_MAX | 569 | 0x239 | Minimum response size cannot exceed the maximum response size |
|
| NSERR_FILTACION_INVALRESPCODE | 570 | 0x23A | Invalid HTTP response code |
|
| NSERR_SVPN_CERT_CHALLENGE | 571 | 0x23B | Destination Server challenged for a client certificate |
|
| NSERR_CACHEGROUP_HOST_REQ | 576 | 0x240 | Host required for a group with invalidation restricted to host |
|
| NSERR_CACHEGROUP_HOST_NREQ | 577 | 0x241 | Host not required |
|
| NSERR_CACHEGROUP_DYNGRP_NEXP | 578 | 0x242 | Cannot expire a parameterized content group |
|
| NSERR_CACHEGROUP_ONE_GRP_REQ | 579 | 0x243 | Only one content group required |
|
| NSERR_CACHEGROUP_ONE_ALL_REQ | 580 | 0x244 | ALL should be the only content group specified |
|
| NSERR_CACHEGROUP_MATCH_PARAM_INVAL | 581 | 0x245 | Invalid request hit parameter |
|
| NSERR_CACHEGROUP_DYN_RES_CACHE | 582 | 0x246 | Cannot specify a parameterized group with a response time CACHE action |
|
| NSERR_EXPR_INVAL_VALUE | 583 | 0x247 | Invalid expression value |
|
| NSERR_CACHEGROUP_PREFETCH_CONFLICT | 584 | 0x248 | Prefetch periods conflict |
|
| NSERR_CACHEGROUP_PREFETCH_ENABLE | 585 | 0x249 | Enable prefetch to set prefetch period |
|
| NSERR_CACHEGROUP_CCH_UNKNOWN | 586 | 0x24A | Unknown cache-control header |
|
| NSERR_CACHEGROUP_RELEXP_X10MS | 587 | 0x24B | Relative expiry milliseconds must be multiples of 10 |
|
| NSERR_CACHEGROUP_PREFETCH_X10MS | 588 | 0x24C | Prefetch period milliseconds must be multiples of 10 |
|
| NSERR_CACHEGROUP_STATIC_TO_DYNAMIC | 589 | 0x24D | This content group cannot be made parameterized |
|
| NSERR_PLCY_DEF_REM_INVAL | 591 | 0x24F | Default policy cannot be removed |
|
| NSERR_CACHEGROUP_PREFETCH_REL_NREQ | 592 | 0x250 | Relative expiry and prefetch period should both be seconds or milliseconds |
|
| NSERR_EXPR_SET_INVAL_FLOWTYPE | 593 | 0x251 | Flow type cannot be changed |
|
| NSERR_EXPR_TOO_BIG | 594 | 0x252 | Expression too long - maximum length is 1500, in fully-qualified form |
|
| NSERR_CPE_INVALID_IDRANGE | 595 | 0x253 | Priority should be between 0 and 64000 (inclusive) |
|
| NSERR_EXPR_TOO_BIG_EXT | 596 | 0x254 | Expression too long - maximum length is 800, in fully-qualified form |
|
| NSERR_CACHEGROUP_MATCHCOOKIE_DYN_REQ | 597 | 0x255 | Match cookies argument allowed only with parameterized groups |
|
| NSERR_CACHEGROUP_MATCHCOOKIE_NREQ | 598 | 0x256 | Cannot modify match cookies |
|
| NSERR_CACHEFWPXY_PRESENT | 599 | 0x257 | Forward proxy is already present |
|
| NSERR_CACHE_PREFETCH_REEVAL_NREQ | 600 | 0x258 | Cannot configure a content group to both prefetch and evaluate every miss |
|
| NSERR_CACHEFWPXY_TOOMANY | 601 | 0x259 | Forward proxy limit reached |
|
| NSERR_CACHE_PET_FC_NREQ | 602 | 0x25A | Cannot enable both Poll Every Time and Flash Cache |
|
| NSERR_SAVECONFIG_IN_PROGRESS | 603 | 0x25B | Configuration is being saved, please try again later |
|
| NSERR_GWSUBNET_NOT_EXIST | 604 | 0x25C | The gateway is not directly reachable |
|
| NSERR_GW_REQ_SUBNET | 605 | 0x25D | An existing route relies on the presence of this subnet |
|
| NSERR_URLPOL_NO_PRI | 606 | 0x25E | Priority cannot be specified for URL-based content switching policy |
|
| NSERR_BAD_CR_ATTRIBS | 607 | 0x25F | Bad cache redirection VIP attributes given |
|
| NSERR_MAC_NOT_SUPPORTED | 608 | 0x260 | MAC redirection not supported |
|
| NSERR_POLICY_NOT_SUPPORTED | 609 | 0x261 | Policy redirection not supported with NNTP |
|
| NSERR_CACHEABILITY_NOT_SUPPORTED | 610 | 0x262 | Cannot set cacheability on cache |
|
| NSERR_HOST_RT_NOT_ALLOWED | 611 | 0x263 | Host route advertisement not permitted for this IP |
|
| NSERR_ROUTING_NOT_ALLOWED | 612 | 0x264 | Routing protocols can run only on SNIPs or NSIP |
|
| NSERR_CONFIG_NOTSAVED | 613 | 0x265 | Configuration is not saved |
|
| NSERR_DIS_ROUTING_NSIP | 614 | 0x266 | Cannot disable dynamic routing on NSIP |
|
| NSERR_EXPRMISMATCH | 624 | 0x270 | ? |
|
| NSERR_NO_HOST | 627 | 0x273 | No host header and default not set |
|
| NSERR_NO_DFLT | 628 | 0x274 | Host header present, no match, and default not set |
|
| NSERR_DFLTDMN_FIRST | 629 | 0x275 | No default domain translation entry |
|
| NSERR_PXY_CONF_LOOP | 630 | 0x276 | Source and target domains cannot be the same |
|
| NSERR_PXY_ME_DUP | 632 | 0x278 | Duplicate map entry |
|
| NSERR_PXY_IVAL_TGT | 633 | 0x279 | Target is invalid during map entry addition |
|
| NSERR_CONNECTED | 634 | 0x27A | Proxy connection established |
|
| NSERR_AUTHENTICATE | 635 | 0x27B | Authentication required |
|
| NSERR_LARGE_DOMAIN | 636 | 0x27C | Domain length overflow |
|
| NSERR_PXY_IVAL_URL | 640 | 0x280 | Source/destination URL or the combination is not valid |
|
| NSERR_PXY_ME_USE | 641 | 0x281 | Map entry is already in use |
|
| NSERR_PXY_MT_TYPE | 642 | 0x282 | Map entries in a table should be homogeneous |
|
| NSERR_PXY_MT_USE | 643 | 0x283 | Map table is in use |
|
| NSERR_PXY_MB_INVAL | 644 | 0x284 | Invalid map bind operation |
|
| NSERR_PXY_MB_USE | 645 | 0x285 | You can bind only one table to a vserver |
|
| NSERR_PXY_SETDCDN | 646 | 0x286 | Invalid DCDN configuration |
|
| NSERR_PXY_SETDFLT | 647 | 0x287 | Invalid default domain specification |
|
| NSERR_PXY_DFLT_NOTSET | 648 | 0x288 | Removing default without setting it |
|
| NSERR_PXY_FWD_IVAL | 649 | 0x289 | Invalid FWD PXY map entry |
|
| NSERR_PXY_MTX_PROT | 656 | 0x290 | PXY and cache protocol should be the same |
|
| NSERR_PXY_MTX_TRA | 657 | 0x291 | Invalid cache type on service |
|
| NSERR_PXY_MTX_FWD | 658 | 0x292 | Forward Pxy matrix |
|
| NSERR_PXY_MTX_REV | 659 | 0x293 | Reverse Pxy Matrix |
|
| NSERR_PXY_ADD_TRA_NONHTTP | 660 | 0x294 | transparent non-HTTP policy is invalid |
|
| NSERR_PXY_ADD_TRA_OTHER | 661 | 0x295 | transparent non-HTTP map/via should not be specified |
|
| NSERR_PXY_OPT_INVAL | 662 | 0x296 | ARP/ghost options invalid for REV/FWD proxy |
|
| NSERR_PXY_ADD_SVR_OTHER | 663 | 0x297 | Simple content based no proxy attribs |
|
| NSERR_PXY_MB_DUP | 664 | 0x298 | Bind entry already exists |
|
| NSERR_PXY_DFLT_DUP | 665 | 0x299 | Default already exists |
|
| NSERR_SEL_INUSE | 672 | 0x2a0 | Selector already exists |
|
| NSERR_SEL_PARSE_FAILED | 673 | 0x2a1 | Error in selector expression syntax |
|
| NSERR_NOSELECTOR | 674 | 0x2a2 | No such selector |
|
| NSERR_SEL_TOOMANY | 675 | 0x2a3 | Selector limit reached |
|
| NSERR_CACHEGROUP_NOSELPARAM | 677 | 0x2a5 | Cannot change param-based content group to selector-based (or vice-versa) |
|
| NSERR_NOCACHEGROUP | 678 | 0x2a6 | Content group does not exist |
|
| NSERR_NONREQ_SEL | 679 | 0x2a7 | Selector expression is not request based |
|
| NSERR_INVALARG | 680 | 0x2a8 | The action qualifier and the specified argument(s) do not match |
|
| NSERR_NOWILD_ALLOWED | 681 | 0x2a9 | Wildcard not allowed with BETWEEN operator |
|
| NSERR_DATE_INCOMPAT | 682 | 0x2aa | Time arguments incompatible |
|
| NSERR_TIMEDATE_INVALID | 683 | 0x2ab | Date/time value invalid |
|
| NSERR_CONTENTGROUP_COOKIE_REQ_PARAM | 684 | 0x2ac | Hit parameters or inval parameters needed to enable cookie matching |
|
| NSERR_CONTENTGROUP_IGNORECASE_REQ_HITPARAM | 685 | 0x2ad | Hit parameters needed to enable case-insensitive param value matching |
|
| NSERR_CONTENTGROUP_INVALPARAM_REQ | 686 | 0x2ae | Inval parameters needed to enable host-based invalidation |
|
| NSERR_CLISEC_EXP_TOO_LONG | 687 | 0x2af | Client security expression too long |
|
| NSERR_NONHTTP_CSW_BIND_HTTP_SSL_POLICY | 688 | 0x2b0 | HTTP/SSL protocol based policies can be bound only to HTTP/SSL CS vserver |
|
| NSERR_NONHTTP_CSW_BIND_DOMAIN_POLICY | 689 | 0x2b1 | Domain based policies can be bound only to HTTP/SSL CS vserver |
|
| NSERR_NONHTTP_CSW_BIND_URL_POLICY | 690 | 0x2b2 | URL based policies can be bound only to HTTP/SSL CS vserver |
|
| NSERR_POLBOUNDTO_TOO_MANY_VSVRS | 691 | 0x2b3 | Domain cannot be set - policy bound to more than one vserver. |
|
| NSERR_PI_CSW_URL_DOMAIN | 692 | 0x2b4 | Domain/URL options disallowed along with advanced expressions |
|
| NSERR_PI_TO_PE_CSW | 693 | 0x2b5 | Advanced expressions based policies cannot be bound to a classic CS vserver. |
|
| NSERR_PE_TO_PI_CSW | 694 | 0x2b6 | Classic expression policies cannot be bound to a advanced CS vserver. |
|
| NSERR_PRIORITY_COMP_PI_CSW | 695 | 0x2b7 | Priority is mandatory for advanced expressions. |
|
| NSERR_PI_TCPCSW | 696 | 0x2b8 | Advanced expressions can not be bound to non-HTTP CS Vserver. |
|
| NSERR_PE_GOTO | 697 | 0x2b9 | Priority Jump expression cannot be bound with a classic expression based policy. |
|
| NSERR_PI_TO_PE_POL_CSW | 698 | 0x2ba | Advanced expression based policy cannot be converted to a classic expression based policy and vice versa. |
|
| NSERR_CACHEOBJECT_EVICT | 699 | 0x2bb | Cached object removed on expiry. |
|
| NSERR_DNSFAIL | 700 | 0x2bc | DNS request failed |
|
| NSERR_HC_RET_TYPE_CHANGE | 701 | 0x2bd | Cannot change http callout return type. |
|
| NSERR_HC_NOT_HTTP_VS | 702 | 0x2be | Not a HTTP or SSL vserver. |
|
| NSERR_HC_REQ_CONFIG_XOR | 703 | 0x2bf | Full request expression and other request attributes cannot be set at the same time. |
|
| NSERR_HC_SERVICE_CONFIG_XOR | 704 | 0x2c0 | |
|
| NSERR_HC_RET_TYPE_REQD | 705 | 0x2c1 | Return type needs to be configured first. |
|
| NSERR_RTSP_CSW_BIND_IP_POLICY | 706 | 0x2c2 | Only IP based policies can be bound to RTSP CS vserver |
|
| NSERR_CSW_BIND_INCOMPAT_TGT | 707 | 0x2c3 | The target vserver is not compatible with the CS verver. |
|
| NSERR_CSW_BIND_INCOMPAT_CSPL | 725 | 0x2d5 | The target vserver is not compatible with the CS policylabel. |
|
| NSERR_AS_BAD_XMLNAMESPACE_PREFIX | 708 | 0x2c4 | Invalid XML-Namespace prefix. |
|
| NSERR_INVALID_SIP_EXPR | 709 | 0x2c5 | The SourceIP Expression specified is invalid. |
|
| NSERR_NO_BACKENDVSERVER | 710 | 0x2c6 | No backend LB vserver found. |
|
| NSERR_CONTENT_GROUP_TOOMANY | 711 | 0x2c7 | ContentGroup limit reached |
|
| NSERR_CACHE_MEM_SIZE_CHANGED | 712 | 0x2c8 | To use new Integrated Cache memory limit, save the configuration and restart the NetScaler. |
|
| NSERR_CACHE_MEM_SIZE_ZERO | 713 | 0x2c9 | No memory limit is configured for Integrated Cache. Use set cache parameter command to set the memory limit. |
|
| NSERR_L2CONN_NOT_ALLOWED | 714 | 0x2ca | l2conn feature is supported only for ncore. |
|
| NSERR_SQL_NOT_ALLOWED | 715 | 0x2cb | Database feature is supported only on nCore |
|
| NSERR_IPSEC_NOT_ALLOWED | 716 | 0x2cc | IPSec feature is not supported |
|
| NSERR_HTMLPAGE_NOT_ALLOWED | 717 | 0x2cd | Respondwith/sqlresponse_ok/sqlresponse_error actions cannot be set to respondwithhtmlpage action, and vice versa. |
|
| NSERR_PE_NOT_ALLOWED_DB | 718 | 0x2ce | PE expressions are not allowed for DataStream. |
|
| NSERR_CSW_NO_POLICY_NAME | 719 | 0x2cf | Policy name is required with priority. |
|
| NSERR_SQL_MSG_EXCEED | 720 | 0x2d0 | Message length should be smaller than 512 |
|
| NSERR_CSW_CLASSIC_APPFW_POL | 721 | 0x2d1 | Binding classic appfw policy to CS vserver is not supported. |
|
| NSERR_ROUTING_STRIPED_SNIP | 722 | 0x2d2 | Routing protocols can run only on a spotted SNIP in a cluster |
|
| NSERR_USERNAME_MISSING | 723 | 0x2d3 | UserName argument Missing |
|
| NSERR_ACTION_EXIST | 724 | 0x2d4 | Default Action for this type already exist. |
|
| NSERR_WRONG_SERVICENAME | 726 | 0x2d6 | Use corresponding gslb service command. |
|
| NSERR_PE_NOT_ALLOWED_RULE | 727 | 0x2d7 | PE expressions are not allowed for RULE based persistence |
|
| NSERR_NODE_NOT_IN_CLUSTER | 728 | 0x2d8 | Node is not in the cluster config |
|
| NSERR_MCMX_CNRES | 729 | 0x2d9 | Error in communication with other cores |
|
| NSERR_HC_POST_REQ_CONFIG_XOR | 730 | 0x2da | Parameters and body cannot be set at the same time for the POST method |
|
| NSERR_HC_CACGRP | 731 | 0X2db | Operation on calloutContentGroup content group not permitted |
|
| NSERR_CSW_BIND_INCOMPAT_BKUP | 732 | 0x2dc | The backup vserver of the target vserver is not compatible with the CS vserver. |
|
| NSERR_CACHE_MEM_RESIZE_IN_PROGRESS | 733 | 0x2dd | Integrated Cache memory resize is in progress. Please wait a few seconds. |
|
| NSERR_CACHE_MEM_RESIZE_FAILED | 734 | 0x2de | Integrated Cache memory resize failed. |
|
| NSERR_CSW_BIND_INCOMPAT_TARGET | 735 | 0x2df | The target vserver has to be an LB vserver. |
|
| NSERR_ATTRIB_MEM_FREED | 736 | 0x2e0 | ATTRIB memory already freed |
|
| NSERR_RULE_MISSING | 737 | 0x2e1 | EvalRule argument Missing |
|
| NSERR_CACHEGROUP_CCH_MAXAGE_MAX | 738 | 0x2e2 | max-age value cannot be greater than 2147483647 |
|
