| NSERR_CLNOTEXIST | 2448 | 0x990 | Cluster does not exist |
|
| NSERR_TOOMANYCLS | 2449 | 0x991 | This node is already added to another cluster |
|
| NSERR_RMLOCALNODE | 2450 | 0x992 | Local Node cannot be deleted |
|
| NSERR_BKPLANEENABLED | 2451 | 0x993 | Cluster Backplane is enabled on this interface |
|
| NSERR_LOCALNODE_NOTCONFIGURED | 2452 | 0x994 | Clustering cannot be enabled as the local node is not a member of the cluster. |
|
| NSERR_HACL_CANNOT_COEXIST | 2453 | 0x995 | Clustering and HA cannot coexist. |
|
| NSERR_CLACPKEYNOTCRT | 2454 | 0x996 | LACP key for Node/cluster is not correct |
|
| NSERR_CLNODE_EXIST | 2455 | 0x997 | already in cluster |
|
| NSERR_BKPLANEDISABLED | 2456 | 0x998 | Disabling Cluster backplane interface |
|
| NSERR_CLAGTHROUGHPUT | 2457 | 0x999 | Currently throughput settings are not allowed on CLAG |
|
| NSERR_LICMISMATCH | 2458 | 0x99A | License mismatch between Configuration Coordinator and local node |
|
| NSERR_CLIP_INVALIDNETMASK | 2459 | 0x99B | CLIP netmask should be 255.255.255.255. |
|
| NSERR_BKPLANELACPDELETE | 2460 | 0x99C | This is the last interface in LACP channel configured as backplane |
|
| NSERR_LINKSETMEMBER | 2461 | 0x99D | Interface/Channel is Linkset member. |
|
| NSERR_CONFIG_PARAM | 2462 | 0x99E | Setting up of netscaler parameter ignored using this command in HA/Cluster mode. Use set nsparam command for this purpose. |
|
| NSERR_CLIP_INVALIDPREFIXLEN | 2463 | 0x99F | CLIP prefix length should be 128. |
|
| NSERR_CLUSTER_L2NOTSUPP | 2464 | 0x9A0 | L2 Mode not supported in Cluster mode. |
|
| NSERR_LINKSET_ONEPERNODE | 2465 | 0x9A1 | Linkset can have only one Interface/Channel per Node |
|
| NSERR_LINKSET_NOTBOUND | 2466 | 0x9A2 | Interface/Channel not bound to Linkset |
|
| NSERR_LINKSET_IDINVALID | 2467 | 0x9A3 | Linkset name should be of form LS/ |
|
| NSERR_CLUSTER_NBNOTSUPP | 2468 | 0x9A4 | Net Bridge is not supported in Cluster mode. |
|
| NSERR_CLUSTER_VPNNOTSUPP | 2469 | 0x9A5 | SSLVPN is not supported in Cluster mode. |
|
| NSERR_CLUSTER_AAANOTSUPP | 2470 | 0x9A6 | AAA is not supported in Cluster mode. |
|
| NSERR_CLUSTER_IPSECNOTSUPP | 2471 | 0x9A7 | IPSEC is not supported in Cluster mode. |
|
| NSERR_LINKSET_LAMEMBER | 2472 | 0x9A8 | Interface part of a Channel |
|
| NSERR_CLIP_LOCALNODE_NOTCONFIGURED | 2473 | 0x9A9 | CLIP cannot be added as the local node is not a member of the cluster. |
|
| NSERR_CLVERSIONMISMATCH | 2474 | 0x9AA | Cluster version mismatch between Configuration Coordinator and local node |
|
| NSERR_CLUSTER_CMNOTSUPP | 2475 | 0x9AB | Connection Mirroring is not supported in Cluster mode |
|
| NSERR_ARP_CLAG_OWNERNODE_MANDATORY | 2476 | 0x9AC | Owner Node should be specified for CLAG. |
|
| NSERR_ARP_OWNERNODE_MANDATORY | 2477 | 0x9AD | Owner Node should be specified. |
|
| NSERR_NOOPCCO | 2478 | 0x9AE | Operation not permitted on the Configuration Coordinator. |
|
| NSERR_SPOTTED_CONFIG_PRESENT | 2479 | 0x9AF | Operation not permitted as the node is part of spotted entity configuration. |
|
| NSERR_NOT_CLUSTER_IP | 2480 | 0x9B0 | IP address should be a CLIP address. |
|
| NSERR_CLUSTER_NNRES | 2481 | 0x9B1 | Error in communication with other nodes in the cluster |
|
| NSERR_LAST_CLUSTER_IP_REMOVAL | 2482 | 0x9B2 | A NetScaler cluster must have a minimum of one cluster IP address. This is the last available cluster IP address and hence it cannot be deleted. |
|
| NSERR_CONFIG_PARAM_INVALID | 2483 | 0x9B3 | Configured Param(s) too small for Cluster. Parameter value(s) will be bumped to OVS node count. |
|
| NSERR_CLUSTER_INVALIDNODE | 2484 | 0x9B4 | Owner node value should be between 0 and 31, both inclusive. |
|
| NSERR_LRONCLACPONLY | 2485 | 0x9B5 | Link Redundancy can be set only in Cluster LACP Channels |
|
| NSERR_MULTIBIND_NOT_SUPPINCLUSTER | 2486 | 0x9B6 | Multiple Bindings in Single Bind Command not Supported in Cluster. |
|
| NSERR_CLUSTER_FISNAMES_DUPNOTALLOWED | 2487 | 0x9B7 | In a cluster setup, the FIS name on each node must be unique. |
|
| NSERR_CLUSTER_CLAG_NOLOCALINTF | 2488 | 0x9B8 | CLA cannot be bound to the FIS as the CLA does not contain a local interface. |
|
| NSERR_FIS_MAX_LIMIT | 2489 | 0x9B9 | An appliance can have a maximum of 64 failover interface sets (FIS). This appliance or ownernode (cluster) already has maximum number of allowable FIS. |
|
