| NSERR_NOTRUNNING | 256 | 0x100 | NetScaler not running |
|
| NSERR_PERM | 257 | 0x101 | Operation not permitted |
|
| NSERR_NOENT | 258 | 0x102 | No such resource |
|
| NSERR_SRCH | 259 | 0x103 | No such process |
|
| NSERR_INTR | 260 | 0x104 | Interrupted system call |
|
| NSERR_IO | 261 | 0x105 | Input/output error |
|
| NSERR_NXIO | 262 | 0x106 | Device not configured |
|
| NSERR_2BIG | 263 | 0x107 | Argument list too long |
|
| NSERR_NOEXEC | 264 | 0x108 | Exec format error |
|
| NSERR_BADF | 265 | 0x109 | Bad file descriptor |
|
| NSERR_CHILD | 266 | 0x10A | No child processes |
|
| NSERR_DEADLK | 267 | 0x10B | Resource deadlock avoided |
|
| NSERR_NOMEM | 268 | 0x10C | Cannot allocate memory |
|
| NSERR_ACCES | 269 | 0x10D | Permission denied |
|
| NSERR_FAULT | 270 | 0x10E | Bad address |
|
| NSERR_NOTBLK | 271 | 0x10F | Block device required |
|
| NSERR_BUSY | 272 | 0x110 | Device busy |
|
| NSERR_EXIST | 273 | 0x111 | Resource already exists |
|
| NSERR_XDEV | 274 | 0x112 | Cross-device link |
|
| NSERR_NODEV | 275 | 0x113 | Operation not supported by device |
|
| NSERR_NOTDIR | 276 | 0x114 | Not a directory |
|
| NSERR_ISDIR | 277 | 0x115 | Is a directory |
|
| NSERR_INVAL | 278 | 0x116 | Invalid argument |
|
| NSERR_NFILE | 279 | 0x117 | Too many open files in system |
|
| NSERR_MFILE | 280 | 0x118 | Too many open files |
|
| NSERR_NOTTY | 281 | 0x119 | Inappropriate ioctl for device |
|
| NSERR_TXTBSY | 282 | 0x11A | Text file busy |
|
| NSERR_FBIG | 283 | 0x11B | File too large |
|
| NSERR_NOSPACE | 284 | 0x11C | No space left on device |
|
| NSERR_SPIPE | 285 | 0x11D | Illegal seek |
|
| NSERR_ROFS | 286 | 0x11E | Read-only file system |
|
| NSERR_MLINK | 287 | 0x11F | Too many links |
|
| NSERR_PIPE | 288 | 0x120 | Broken pipe |
|
| NSERR_DOM | 289 | 0x121 | Numerical argument out of domain |
|
| NSERR_RANGE | 290 | 0x122 | Result too large |
|
| NSERR_AGAIN | 291 | 0x123 | Resource temporarily unavailable |
|
| NSERR_INPROGRESS | 292 | 0x124 | Operation now in progress |
|
| NSERR_ALREADY | 293 | 0x125 | Operation already in progress |
|
| NSERR_NOTSOCK | 294 | 0x126 | Socket operation on non-socket |
|
| NSERR_DESTADDRREQ | 295 | 0x127 | Destination address required |
|
| NSERR_MSGSIZE | 296 | 0x128 | Message too long |
|
| NSERR_PROTOTYPE | 297 | 0x129 | Protocol wrong type for socket |
|
| NSERR_NOPROTOOPT | 298 | 0x12A | Protocol not available |
|
| NSERR_PROTONOSUPPORT | 299 | 0x12B | Protocol not supported |
|
| NSERR_SOCKTNOSUPPORT | 300 | 0x12C | Socket type not supported |
|
| NSERR_OPNOTSUPP | 301 | 0x12D | Operation not supported |
|
| NSERR_PFNOSUPPORT | 302 | 0x12E | Protocol family not supported |
|
| NSERR_AFNOSUPPORT | 303 | 0x12F | Address family not supported by protocol family |
|
| NSERR_ADDRINUSE | 304 | 0x130 | Address already in use |
|
| NSERR_ADDRNOTAVAIL | 305 | 0x131 | Cant assign requested address |
|
| NSERR_NETDOWN | 306 | 0x132 | Network is down |
|
| NSERR_NETUNREACH | 307 | 0x133 | Network is unreachable |
|
| NSERR_NETRESET | 308 | 0x134 | Network dropped connection on reset |
|
| NSERR_CONNABORTED | 309 | 0x135 | Software caused connection abort |
|
| NSERR_CONNRESET | 310 | 0x136 | Connection reset by peer |
|
| NSERR_NOBUFS | 311 | 0x137 | No buffer space available |
|
| NSERR_ISCONN | 312 | 0x138 | Socket is already connected |
|
| NSERR_NOTCONN | 313 | 0x139 | Socket is not connected |
|
| NSERR_SHUTDOWN | 314 | 0x13A | Cant send after socket shutdown |
|
| NSERR_TOOMANYREFS | 315 | 0x13B | Resource in use |
|
| NSERR_TIMEDOUT | 316 | 0x13C | Operation timed out |
|
| NSERR_CONNREFUSED | 317 | 0x13D | Connection refused |
|
| NSERR_LOOP | 318 | 0x13E | Too many levels of symbolic links |
|
| NSERR_NAMETOOLONG | 319 | 0x13F | File name too long |
|
| NSERR_HOSTDOWN | 320 | 0x140 | Host is down |
|
| NSERR_HOSTUNREACH | 321 | 0x141 | No route to host |
|
| NSERR_NOTEMPTY | 322 | 0x142 | Directory not empty |
|
| NSERR_PROCLIM | 323 | 0x143 | Too many processes |
|
| NSERR_USERS | 324 | 0x144 | Too many users |
|
| NSERR_DQUOT | 325 | 0x145 | Disc quota exceeded |
|
| NSERR_STALE | 326 | 0x146 | Stale NFS file handle |
|
| NSERR_REMOTE | 327 | 0x147 | Too many levels of remote in path |
|
| NSERR_BADRPC | 328 | 0x148 | RPC struct is bad |
|
| NSERR_RPCMISMATCH | 329 | 0x149 | RPC version wrong |
|
| NSERR_PROGUNAVAIL | 330 | 0x14A | RPC prog. not avail |
|
| NSERR_PROGMISMATCH | 331 | 0x14B | Program version wrong |
|
| NSERR_PROCUNAVAIL | 332 | 0x14C | Bad procedure for program |
|
| NSERR_NOLCK | 333 | 0x14D | No locks available |
|
| NSERR_NOSYS | 334 | 0x14E | System Call not supported; Possible Reason: NetScaler is not running |
|
| NSERR_FTYPE | 335 | 0x14F | Inappropriate file type or format |
|
| NSERR_AUTH | 336 | 0x150 | Authentication error |
|
| NSERR_NEEDAUTH | 337 | 0x151 | Need authenticator |
|
| NSERR_WOULDBLOCK | 338 | 0x152 | Operation would block |
|
| NSERR_NOCODE | 339 | 0x153 | Feature is not implemented |
|
| NSERR_NOTSUSER | 340 | 0x154 | Not super-user |
|
| NSERR_BIGDATA | 341 | 0x155 | Data size is too big |
|
| NSERR_SMALLDATA | 342 | 0x156 | Data size is too small |
|
| NSERR_NOMORENT | 343 | 0x157 | No more entry in table |
|
| NSERR_NOSERVICE | 344 | 0x158 | No Service |
|
| NSERR_OSERROR | 345 | 0x159 | Operating system error |
|
| NSERR_NONEXPCMD | 346 | 0x15A | Unexpected command |
|
| NSERR_CMDPROPFAIL | 347 | 0x15B | Command propagation failed |
|
| NSERR_TOOMANYNODES | 348 | 0x15C | Too many nodes |
|
| NSERR_SECONDARYFAIL | 349 | 0x15D | Command failed on secondary node, but succeeded on primary node. Configuration will be synchronized to ensure secondary and primary have same configuration. |
|
| NSERR_INVALBACKUP | 350 | 0x15E | Invalid backup vserver |
|
| NSERR_NOSERVER | 351 | 0x15F | No such server |
|
| NSERR_LOGINREQD | 352 | 0x160 | Login is required |
|
| NSERR_RPCINVAL | 353 | 0x161 | RPC invalid argument |
|
| NSERR_NOUSER | 354 | 0x162 | Invalid username or password |
|
| NSERR_INVALPASSWD | 355 | 0x163 | Invalid username or password |
|
| NSERR_LICENSE | 356 | 0x164 | Feature(s) not licensed |
|
| NSERR_DEFERRED | 357 | 0x165 | The command is stored for later execution |
|
| NSERR_PROPAUTHFAIL | 358 | 0x166 | Command propagation failed due to user authentication problems |
|
| NSERR_NODELSUSER | 359 | 0x167 | The superuser cannot be removed |
|
| NSERR_NOMODSUSER | 360 | 0x168 | Permissions for this superuser cannot be modified |
|
| NSERR_INVALNODEID | 362 | 0x16A | Invalid node ID specified |
|
| NSERR_NOTOPHA | 363 | 0x16B | Operation not permitted on stand-alone node |
|
| NSERR_NOOPPEERBAD | 364 | 0x16c | Operation not possible due to invalid peer state. Rectify and retry. |
|
| NSERR_NOOPBAD | 365 | 0x16d | Operation not possible as system state is invalid. Use show node for more information. |
|
| NSERR_NOPNOW | 366 | 0x16e | Operation not possible now. Please wait for system to stabilize before retrying. |
|
| NSERR_NOOPPRI | 367 | 0x16f | Operation permitted only on secondary node. |
|
| NSERR_NOOPSEC | 368 | 0x170 | Operation permitted only on primary node. |
|
| NSERR_REDIRECT | 369 | 0x171 | Redirect request (VIP down) |
|
| NSERR_BUFOVERFLOW | 370 | 0x172 | Buffer overflow occurred |
|
| NSERR_NOUSERPOLICY | 371 | 0x173 | No command policy defined, permission denied |
|
| NSERR_NOSYSGROUP | 372 | 0x174 | System group does not exist |
|
| NSERR_NOSYSCMDPOL | 373 | 0x175 | System command policy does not exist |
|
| NSERR_HAIPV6PT | 374 | 0x176 | IPV6 Feature cannot be disabled while HA is running over IPv6. |
|
| NSERR_HANSIPV6 | 375 | 0x177 | IPv6 NSIP cannot be changed while HA is running over IPv6. |
|
| NSERR_NSIPV6ACTIVE | 376 | 0x178 | IPv6 NSIP is not in ACTIVE state, rectify and retry. |
|
| NSERR_RTMON_STANDALONE | 377 | 0x179 | Unbind all route monitors before making node standalone. |
|
| NSERR_IPV6FEAT_DISABLED | 378 | 0x17a | IPv6 Feature Disabled |
|
| NSERR_DHCP_PBR_DEPENDENT | 379 | 0x17b | PBR rule present with nexthop dependent on released DHCP lease |
|
| NSERR_IPSECPROF_PERM | 380 | 0x17c | Tunnel protocol IPSEC must have ipsec profile set to none. |
|
| NSERR_IFPAIR_BOUND | 381 | 0x17d | Interface(s) already member of other interface pair |
|
| NSERR_IFPAIR_NOTPAIR | 382 | 0x17e | Number of member interfaces need to be exactly 2 |
|
| NSERR_IPRANGENOTALLOWD | 394 | 0x18A | Range not allowed for wildcard IP |
|
| NSERR_IVALIDIPRANGE | 395 | 0x18B | Invalid range value |
|
| NSERR_IPRANGEMAXLIMIT | 396 | 0x18C | Range value greater than maximum limit 254 |
|
| NSERR_IP_NOT_EXIST | 397 | 0x18D | IP does not exist for default or specified td |
|
| NSERR_TOOMANYRULES | 398 | 0x18E | Maximum number of ACLs on the system has been exceeded |
|
| NSERR_PASSWD_LEN_MIN_8 | 399 | 0x18F | Password too short - minimum length is 8 characters |
|
| NSERR_SYNC_DISABLED | 410 | 0x19A | Synchronization disabled |
|
| NSERR_NODE_DISABLED | 411 | 0x19B | Node disabled |
|
| NSERR_SYNC_PROGRESS | 412 | 0x19C | Synchronization is in progress |
|
| NSERR_ADNS_PERM | 413 | 0x19D | Operation not permitted on ADNS service |
|
| NSERR_NOINC_IPSAMESUBNET | 414 | 0x19E | Peer IP should be on the NSIP subnet if INC mode is disabled |
|
| NSERR_INVALID_PEERIP | 415 | 0x19F | Not a valid peer IP |
|
| NSERR_REDIRECT307 | 416 | 0x1A0 | Redirect request (send 307 temporary redirect |
|
| NSERR_INVALHOSTNAME | 417 | 0x1A1 | Invalid hostname |
|
| NSERR_REWRITE_NOT_SUPPORTED | 418 | 0x1A2 | Port rewrite not supported on this vserver type |
|
| NSERR_IPCHG_DENY | 419 | 0x1A3 | IP address change not permitted on this entity |
|
| NSERR_IPCHG_GSLB | 420 | 0x1A4 | GSLB local service IP cannot be changed. Please change the corresponding vservers IP |
|
| NSERR_GSLB_IPCHG | 421 | 0x1A5 | corresponding GSLB service IP has also been changed. |
|
| NSERR_NOAUDITSRVC | 422 | 0x1A6 | No audit service running on the specified port |
|
| NSERR_LACPKEY_NOTSET | 423 | 0x1A7 | LACP key not set |
|
| NSERR_CHANNEL_INUSEBYLACP | 424 | 0x1A8 | Channel in use by LACP |
|
| NSERR_LACPENABLED | 425 | 0x1A9 | LACP enabled interface cannot be bound manually to a channel |
|
| NSERR_IFACEMANUALLYBOUND | 426 | 0x1AA | LACP cannot be enabled, interface manually bound to a channel |
|
| NSERR_INTRECINUSE | 427 | 0x1AB | Domain name for the reverse domain name already exists |
|
| NSERR_IPPORT_VIP_CONFLICT | 428 | 0x1AC | IP, port conflict with another entity bound to the same vserver |
|
| NSERR_IPPORT_VIP_BOUND | 429 | 0x1AD | IP, port conflict with an entity already bound to the vserver |
|
| NSERR_NO_BACKUP_VIP | 430 | 0x1AE | No such backup vserver |
|
| NSERR_REQ_SET_ARGS | 431 | 0x1AF | No arguments to set |
|
| NSERR_SVCGRP_MEMBER_NAMECONFLICT | 432 | 0x1B0 | Name conflicts with an existing service or service group member name |
|
| NSERR_SERVER_NAME_EXIST | 433 | 0x1B1 | Server name already exists |
|
| NSERR_MAX_SERVICE_BINDING_ON_VSERVER | 434 | 0x1B2 | Maximum services bound to vserver exceeded |
|
| NSERR_MAX_SVC_ENTITY_BINDING_ON_SVCGROUP | 435 | 0x1B3 | Maximum services bound to service group exceeded |
|
| NSERR_FSMALL | 436 | 0x1B4 | File too small |
|
| NSERR_INTOFLOW | 437 | 0x1B5 | Integer overflow |
|
| NSERR_ASYNC_BLOCKED | 438 | 0x1B6 | PI has blocked for body accumulation |
|
| NSERR_SACL_CLEARPENDING | 439 | 0x1B7 | Clear in progress |
|
| NSERR_SACL_NAME_EXISTS | 440 | 0x1B8 | An ACL with the same name exists |
|
| NSERR_SACL_SUPERSET_EXISTS | 441 | 0x1B9 | Operation not permitted. (An overlapping rule already exists) |
|
| NSERR_SACL_SUBSET_EXISTS | 442 | 0x1BA | Operation not permitted. (A rule which is subset of this rule already exists) |
|
| NSERR_NOINC_ROUTEMONITOR | 443 | 0x1BB | Route monitors should be added only if INC mode is enabled |
|
| NSERR_SESSION_EXPIRED | 444 | 0x1BC | Session expired or killed. Please login again |
|
| NSERR_SESSION_EXCEEDED | 445 | 0x1BD | Session limit exceeded |
|
| NSERR_CFE_CONN_EXCEEDED | 446 | 0x1BE | Connection limit to CFE exceeded |
|
| NSERR_CFE_KILLSELF | 449 | 0x1C1 | Invalid session id. Current session cannot be killed |
|
| NSERR_CFE_INCOMPLETESESSION | 450 | 0x1C2 | Invalid session. Response/challenge is incomplete |
|
| NSERR_ACL_ALREADYINSTATE | 451 | 0x1C3 | Entity already in this state |
|
| NSERR_CFE_SESSION_NOEXIST | 452 | 0x1C4 | Session does not exist |
|
| NSERR_SYSGROUP_USER_EXISTS | 453 | 0x1C5 | User already bound to system group |
|
| NSERR_SYSGROUP_POLICY_EXISTS | 454 | 0x1C6 | Policy already bound to system group |
|
| NSERR_SLEEP | 455 | 0x1C7 | Sleep process sleep |
|
| NSERR_PPEDIE | 456 | 0x1C8 | Your PPE is no more |
|
| NSERR_NOCONN_CMDPROPFAIL | 457 | 0x1C9 | Unable to establish connection with the secondary. Command propagation failed |
|
| NSERR_TIMEOUT_SECONDARY | 458 | 0x1CA | There is no response from the secondary. Propagation timed out |
|
| NSERR_RPC_TIMEOUT | 459 | 0x1CB | RPC timeout |
|
| NSERR_NOT_SUPPORTED | 460 | 0x1CC | Feature not supported in this release |
|
| NSERR_NOENT_VSERVER | 461 | 0x1CD | No such Vserver |
|
| NSERR_NOENT_SVC | 462 | 0x1CE | No such service |
|
| NSERR_NOENT_SVC_SVCGRP | 463 | 0x1CF | No such service/serviceGroup |
|
| NSERR_HA_NOV4_NETMASK | 464 | 0x1D0 | IPv4 netmask is not required for IPv6 |
|
| NSERR_MAX_VSEVRVER_BINDINGS_TO_SERVICE | 465 | 0x1D1 | Maximum vservers bound to a service exceeded |
|
| NSERR_SACL6_CLEARPENDING | 466 | 0x1D2 | Simple ACL6 Clear in progress |
|
| NSERR_SACL6_NAME_EXISTS | 467 | 0x1D3 | Simple ACL6 with the same name exists |
|
| NSERR_SACL6_SUPERSET_EXISTS | 468 | 0x1D4 | Operation not permitted. (An overlapping rule already exists) |
|
| NSERR_SACL6_SUBSET_EXISTS | 469 | 0x1D5 | Operation not permitted. (A rule which is subset of this rule already exists) |
|
| NSERR_NO_BACKUP_VIP_BOUND | 470 | 0x1D6 | No backupVserver bound |
|
| NSERR_SESSION_EXPIRED_REDIRECT | 471 | 0x1D7 | Session expired, Please login again |
|
| NSERR_NOENT_VLAN | 472 | 0x1D8 | Vlan does not exist |
|
| NSERR_MAX_SVC_ENTITY | 473 | 0x1D9 | Maximum service limit reached |
|
| NSERR_CL_EXIST | 474 | 0x1DA | Resource already exists in cluster |
|
| NSERR_OWNERNODE_NOTALLOWED | 475 | 0x1DB | Can not specify owner node. |
|
| NSERR_OWNERNODE_NOT_SPECIFIED | 476 | 0x1DC | Owner node is not specified. |
|
| NSERR_NOT_SUPPINCLUSTER | 477 | 0x1DD | Operation not supported in Cluster. |
|
| NSERR_VSERVER_TYPE_MISMATCH | 478 | 0x1DE | Vserver type mismatch. |
|
| NSERR_ITER_END | 479 | 0x1DF | End of iteration reached. |
|
| NSERR_CONNECT_TO_CLUSTER_IP | 1382 | 0x566 | Please connect to cluster IP and run showtechsupport on that node. |
|
| NSERR_LB_AUDIT_IP_DENY | 1383 | 0x567 | Changing IP address of LB vserver not permitted when Audit server also referring to same server_info . |
|
| NSERR_IC_OFF_DISABLING_FEO | 1384 | 0x568 | IC is disabled, but FEO is enabled. |
|
| NSERR_SYNC_VLAN_EXIST | 1385 | 0x569 | Please unset sync vlan, before removing the HA node. |
|
| NSERR_NO_CONTENT | 1454 | 0x5AE | 204 No Content |
|
| NSERR_AUDIT_VERSION_MISMATCH | 1481 | 0x5C9 | Audit version mismatch |
|
| NSERR_ICAMODE_STATUS_NOT_OK | 1487 | 0x5CF | vpn icamode status not okay |
|
