| NSERR_RNAT_INV | 769 | 0x301 | Reverse NAT not applicable for default route. |
|
| NSERR_INVALID_IF | 770 | 0x302 | Invalid interface name/number. |
|
| NSERR_MGRLIMIT_REACHED | 771 | 0x303 | Maximum manager limit reached. |
|
| NSERR_SP_INVALD_TABLE | 772 | 0x304 | SP table entries should be in increasing order. |
|
| NSERR_RNAT_NATIP_EXISTS | 773 | 0x305 | RNAT to the target network with specified NAT IP already exists. |
|
| NSERR_RNAT_EXISTS | 774 | 0x306 | RNAT to the target network already exists. |
|
| NSERR_RNAT_NOT_EXISTS | 775 | 0x307 | RNAT to the target network does not exist. |
|
| NSERR_RNAT_NATIP_NOT_EXISTS | 776 | 0x308 | RNAT to the target network with specified NAT IP doesnt exist. |
|
| NSERR_RNAT_INVALID_NATIP | 777 | 0x309 | NAT IP is not valid. |
|
| NSERR_RNAT_XACLWITHTTL | 778 | 0x30a | Acl with ttl can not be used in RNAT/RNAT6/ForwardingSession rule. |
|
| NSERR_ARP_DISABLED | 784 | 0x310 | IP has arp disabled. |
|
| NSERR_ARP_SEC_NOT_OWNEDIP | 785 | 0x311 | Secondary can not arp for this IP. |
|
| NSERR_CPE_RULE_INVAL | 786 | 0x312 | Invalid rule. |
|
| NSERR_INVAL_FLOWTYPE | 787 | 0x313 | Only authorization, audit, VPN session and traffic policies can be bound to aaa user or group. |
|
| NSERR_INVAL_POLICY_TYPE | 788 | 0x314 | Response rule is invalid in an authorization policy. |
|
| NSERR_CPE_RULE_ACTION_INVAL | 789 | 0x315 | Request action is valid only for request rule. |
|
| NSERR_CPE_DEF_SET_INVAL | 790 | 0x316 | Default policy cannot be set. |
|
| NSERR_INVAL_FORCECLEANUP | 791 | 0x317 | Invalid forcecleanup value. |
|
| NSERR_INVAL_AAA_GROUP | 792 | 0x318 | Invalid authorizationgroup value. |
|
| NSERR_INVAL_PROXY | 793 | 0x319 | Invalid allprotocolproxy value. |
|
| NSERR_INVAL_HTTTPPROXY | 800 | 0x320 | Invalid HTTP proxy value. |
|
| NSERR_INVAL_FTPPROXY | 801 | 0x321 | Invalid FTP proxy value. |
|
| NSERR_INVAL_SOCKPROXY | 802 | 0x322 | Invalid SOCKS proxy value. |
|
| NSERR_INVAL_GOPHERPROXY | 803 | 0x323 | Invalid GOPHER proxy value. |
|
| NSERR_INVAL_SSLPROXY | 804 | 0x324 | Invalid SSL proxy value. |
|
| NSERR_INVAL_AAAGRP_MAX | 805 | 0x325 | Max 5 groups can be specified in authorizationgroup. |
|
| NSERR_INVAL_MAX_PORT_NUM | 806 | 0x326 | Maximum 16 ports can be specified in httpport. |
|
| NSERR_INVAL_HTTPPORT | 807 | 0x327 | Invalid port. |
|
| NSERR_INVAL_VPNVSERER_POLTYPE | 808 | 0x328 | Only authentication and traffic policies can be bound to a VPN vserver. |
|
| NSERR_INVAL_VPNGLOBAL_POLTYPE | 809 | 0x329 | Only authentication and traffic policies can be bound to VPN global. |
|
| NSERR_CPE_REM_INUSE | 810 | 0x32a | Bound policy cannot be removed. |
|
| NSERR_PROXY_CONFLICT | 811 | 0x32b | Proxy server for all protocols already configured. |
|
| NSERR_PROXY_INVAL | 812 | 0x32c | Domain names allowed only if proxy type is browser |
|
| NSERR_PXYEXCPT_INVAL | 813 | 0x32d | Proxy exception allowed only if proxy type is browser |
|
| NSERR_CPE_POLTYPE_NO_CSE | 814 | 0x32e | Policy type does not support client security expressions in rule |
|
| NSERR_SESSACT_CSE_INCOMPATIBLE | 815 | 0x32f | Session action and rule are incompatible |
|
| NSERR_NOMEM_CSE | 816 | 0x330 | Not enough memory while adding client security expressions |
|
| NSERR_INCOMPAT_FS_RULE | 817 | 0x331 | File system expressions supported in authorization policy only |
|
| NSERR_INCOMPAT_FS_MIX | 818 | 0x332 | Incompatible expressions mixed with file system expressions in rule |
|
| NSERR_DR_ENABLE | 819 | 0x333 | Dynamic routing can be enabled on only one IP per subnet |
|
| NSERR_MAX_DISTANCE | 820 | 0x334 | Only null interface routes can have distance equal to 255 |
|
| NSERR_NULL_ROUTE_DISTANCE | 821 | 0x335 | It is not possible to set the administrative distance/cost metric for a null interface route |
|
| NSERR_BAD_ACTION_TCP_PROFILE_TYPE | 822 | 0x336 | TCP profile cannot be set to this service type |
|
| NSERR_BAD_ACTION_HTTP_PROFILE_TYPE | 823 | 0x337 | HTTP profile cannot be set to this service type |
|
| NSERR_SP_INVALID_THRESHOLD | 824 | 0x338 | Invalid base threshold value |
|
| NSERR_VIP_ROUTE_EXISTS | 825 | 0x339 | VIP exists for this host route |
|
| NSERR_ACTION_BOUND | 832 | 0x340 | Action bound to policy can not be deleted. |
|
| NSERR_MAX_IPLIMIT | 833 | 0x341 | Maximum limit for bound IP to this resource record reached, remaining IPs destined for this resource record will be discarded. |
|
| NSERR_BAD_PREFIX_LEN | 826 | 0x33a | Invalid rnat network prefix len it must be 0-128 |
|
| NSERR_INV_NETADDR | 827 | 0x33b | Invalid IPv6 network address |
|
| NSERR_MIN_DISTANCE | 828 | 0x33c | Static route cannot have distance less than 1 |
|
| NSERR_IPSEC_PROFILE_INUSE | 829 | 0x33d | Profile is in use by an ip tunnel. |
|
| NSERR_IPSEC_INVALID_PROFILE_NAME | 830 | 0x33e | Invalid profile name. |
|
| NSERR_SPOTTED | 831 | 0x33f | Spotted IP cannot be used here |
|
| NSERR_IPSEC_PBR_ONLY_IP_SUPPORTED | 834 | 0x342 | Only IP range is supported |
|
| NSERR_IPSEC_IP_NOT_CONTIGUOUS | 835 | 0x343 | Invalid IP range. The IP range does not cover all the IPs for a given subnet mask |
|
| NSERR_INVAL_USER_ACCOUNTING | 836 | 0x344 | Invalid userAccounting value. userAccounting value must be a radiusPolicy. |
|
