Download full document:

perf_ssl_backend_ciphers_report

Configuration for SSL Back-end Ciphers report resource.

(click to see Operations)

Properties

(click to see Operations)

NameData TypePermissionsDescription
sslbkendcipheraes256rate<Double>Read-writesslbkendcipheraes256rate Value .
sslbe40bitdesciphersrate<Double>Read-writesslbe40bitdesciphersrate Value .
sslbe56bitdesciphersrate<Double>Read-writesslbe56bitdesciphersrate Value .
sslbe168bit3desciphersrate<Double>Read-writesslbe168bit3desciphersrate Value .
sslbe40bitrc2ciphersrate<Double>Read-writesslbe40bitrc2ciphersrate Value .
timestamp<Double>Read-writetimestamp in milliseconds.
id<String>Read-writeId is system generated key for all the entries in this perf table configuration.
Maximum length = 256
sslbe128bitrc4ciphersrate<Double>Read-writesslbe128bitrc4ciphersrate Value .
sslbenullciphersrate<Double>Read-writesslbenullciphersrate Value .
sslbe64bitrc4ciphersrate<Double>Read-writesslbe64bitrc4ciphersrate Value .
sslbe56bitrc2ciphersrate<Double>Read-writesslbe56bitrc2ciphersrate Value .
sslbe40bitrc4ciphersrate<Double>Read-writesslbe40bitrc4ciphersrate Value.
device_ip_address<String>Read-writeDevice IP Address.
Minimum length = 1
Maximum length = 64
sslbe128bitrc2ciphersrate<Double>Read-writesslbe128bitrc2ciphersrate Value .
sslbkendcipheraes128rate<Double>Read-writesslbkendcipheraes128rate Value .
sslbe56bitrc4ciphersrate<Double>Read-writesslbe56bitrc4ciphersrate Value .
report_start_time<Double>Read-writereport_start_time in seconds.
report_end_time<Double>Read-writereport_end_time in seconds.

Operations

(click to see Properties)

GET

Some options that you can use for each operations:

  • Getting warnings in response:NITRO allows you to get warnings in an operation by specifying the "warning" query parameter as "yes". For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http://<netscaler-ip-address>/nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code "209 X-NITRO-WARNING".

  • Authenticated access for individual NITRO operations:NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER:<username>

    X-NITRO-PASS:<password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN=<tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in <green>.

get

URL: https://<MGMT-IP>/nitro/v1/config/perf_ssl_backend_ciphers_report

HTTP Method: null

Response Payload: 

{ "errorcode": 0, "message": "Done", "severity": ;ltString_value>, "perf_ssl_backend_ciphers_report":[{
"sslbkendcipheraes256rate":<Double_value>,
"sslbe40bitdesciphersrate":<Double_value>,
"sslbe56bitdesciphersrate":<Double_value>,
"sslbe168bit3desciphersrate":<Double_value>,
"sslbe40bitrc2ciphersrate":<Double_value>,
"timestamp":<Double_value>,
"id":<String_value>,
"sslbe128bitrc4ciphersrate":<Double_value>,
"sslbenullciphersrate":<Double_value>,
"sslbe64bitrc4ciphersrate":<Double_value>,
"sslbe56bitrc2ciphersrate":<Double_value>,
"sslbe40bitrc4ciphersrate":<Double_value>,
"device_ip_address":<String_value>,
"sslbe128bitrc2ciphersrate":<Double_value>,
"sslbkendcipheraes128rate":<Double_value>,
"sslbe56bitrc4ciphersrate":<Double_value>,
"report_start_time":<Double_value>,
"report_end_time":<Double_value>}]}