netbridge¶
The following operations can be performed on "netbridge":
add | set | unset | rm | show | bind | unbind
add netbridge¶
Add a network bridge.
Synopsys¶
add netbridge <name> [-vxlanVlanMap <string>]
Arguments¶
name
The name of the network bridge.
vxlanVlanMap
The vlan to vxlan mapping to be applied to this netbridge.
Example¶
add netbridge bridge1
set netbridge¶
Set network bridge parameters.
Synopsys¶
set netbridge <name> [-vxlanVlanMap <string>]
Arguments¶
name
The name of the network bridge.
vxlanVlanMap
The vlan to vxlan mapping to be applied to this netbridge.
Example¶
set netbridge bridge1 -vlanVxlanMap p1
unset netbridge¶
Use this command to remove netbridge settings.Refer to the set netbridge command for meanings of the arguments.
Synopsys¶
unset netbridge <name> -vxlanVlanMap
rm netbridge¶
Remove a network bridge.
Synopsys¶
rm netbridge <name>
Arguments¶
name
The name of the network bridge.
Example¶
remove netbridge bridge1
show netbridge¶
Show configured network bridges.
Synopsys¶
show netbridge [<name>]
Arguments¶
name
The name of the network bridge.
Outputs¶
vxlanVlanMap
The vlan to vxlan mapping to be applied to this netbridge.
tunnel
The name of the tunnel that is a part of this bridge.
vlan
The VLAN that is extended by this network bridge.
IPAddress
The subnet that is extended by this network bridge.
netmask
The network mask for the subnet.
stateflag
Used internally for display.
devno
count
bind netbridge¶
Bind a network bridge to its attributes.
Synopsys¶
bind netbridge <name> [-tunnel <string> ...] [-vlan <positive_integer> ...] [-IPAddress <ip_addr|ipv6_addr|*> [<netmask>]]
Arguments¶
name
The name of the network bridge.
tunnel
The name of the tunnel that needs to be a part of this network bridge.
vlan
The VLAN that needs to be extended.
Minimum value: 1
Maximum value: 4094
IPAddress
The subnet that needs to be extended.
netmask
Subnet mask in dotted-decimal format. For example: 255.255.255.0. This parameter is required for IPv4.
Example¶
bind netbridge bridge1 -tunnel tun0
unbind netbridge¶
Unbind a network bridge from its attributes.
Synopsys¶
unbind netbridge <name> [-tunnel <string> ...] [-vlan <positive_integer> ...] [-IPAddress <ip_addr|ipv6_addr|*> [<netmask>]]
Arguments¶
name
The name of the network bridge.
tunnel
The name of the tunnel that is part of this network bridge.
vlan
The vlan that is part of this network bridge.
Minimum value: 1
Maximum value: 4094
IPAddress
The subnet that is part of this network bridge.
netmask
Subnet mask in dotted-decimal format. For example: 255.255.255.0. This parameter is required for IPv4.
Example¶
unbind netbridge bridge1 -tunnel tun0