nat64¶

The following operations can be performed on "nat64":

add nat64¶

Configure a nat64 rule on the appliance.

Synopsys¶

add nat64 <name> <acl6name> [-netProfile <string>]

Arguments¶

name

Name for the NAT64 rule. Must begin with a letter, number, or the underscore character (_), and can consist of letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore characters. Cannot be changed after the rule is created. Choose a name that helps identify the NAT64 rule.

acl6name

Name of any configured ACL6 whose action is ALLOW. IPv6 Packets matching the condition of this ACL6 rule and destination IP address of these packets matching the NAT64 IPv6 prefix are considered for NAT64 translation.

netProfile

Name of the configured netprofile. The NetScaler appliance selects one of the IP address in the netprofile as the source IP address of the translated IPv4 packet to be sent to the IPv4 server.

set nat64¶

Set the configured nat64 rule.

Synopsys¶

set nat64 <name> [-acl6name <string>] [-netProfile <string>]

Arguments¶

name

Name for the NAT64 rule. Must begin with a letter, number, or the underscore character (_), and can consist of letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore characters. Cannot be changed after the rule is created. Choose a name that helps identify the NAT64 rule.

acl6name

Name of any configured ACL6 whose action is ALLOW. IPv6 Packets matching the condition of this ACL6 rule and destination IP address of these packets matching the NAT64 IPv6 prefix are considered for NAT64 translation.

netProfile

Name of the configured netprofile. The NetScaler appliance selects one of the IP address in the netprofile as the source IP address of the translated IPv4 packet to be sent to the IPv4 server.

Example¶

set nat64 rule1 -acl6name acl1 .

unset nat64¶

Use this command to remove nat64 settings.Refer to the set nat64 command for meanings of the arguments.

Synopsys¶

unset nat64 <name> -netProfile

rm nat64¶

Remove the configured nat64 rule.

Synopsys¶

rm nat64 <name>

Arguments¶

name

Name for the NAT64 rule. Must begin with a letter, number, or the underscore character (_), and can consist of letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore characters. Cannot be changed after the rule is created. Choose a name that helps identify the NAT64 rule.

Example¶

rm nat64 name.

stat nat64¶

Display statistics for nat64 sessions.

Synopsys¶

stat nat64 [-detail] [-fullValues] [-ntimes <positive_integer>] [-logFile <input_filename>] [-clearstats ( basic | full )]

Arguments¶

detail

Specifies detailed output (including more statistics). The output can be quite voluminous. Without this argument, the output will show only a summary.

fullValues

Specifies that numbers and strings should be displayed in their full form. Without this option, long strings are shortened and large numbers are abbreviated

ntimes

The number of times, in intervals of seven seconds, the statistics should be displayed.

Default value: 1

Minimum value: 0

logFile

The name of the log file to be used as input.

clearstats

Clear the statsistics / counters

Possible values: basic, full

Outputs¶

TCP Sessions (nat64TotTcpSessions)

Total number of TCP sessions created by NAT64.

UDP Sessions (nat64TotUdpSessions)

Total number of UDP sessions created by NAT64.

ICMP Sessions (nat64TotIcmpSessions)

Total number of ICMP sessions created by NAT64.

Total Sessions (nat64TotSessions)

Total number of sessions created by NAT64.

Example¶

stat nat64

show nat64¶

Display the nat64 configuration.

Synopsys¶

show nat64 [<name>]

Arguments¶

name

Name for the NAT64 rule. Must begin with a letter, number, or the underscore character (_), and can consist of letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore characters. Cannot be changed after the rule is created. Choose a name that helps identify the NAT64 rule.

Outputs¶

acl6name

Name of any configured ACL6 whose action is ALLOW. IPv6 Packets matching the condition of this ACL6 rule and destination IP address of these packets matching the NAT64 IPv6 prefix are considered for NAT64 translation.

netProfile

Name of the configured netprofile. The NetScaler appliance selects one of the IP address in the netprofile as the source IP address of the translated IPv4 packet to be sent to the IPv4 server.

devno

count

stateflag