ns timeout¶
The following operations can be performed on "ns timeout":
set ns timeout¶
Sets timeout values for various aspects of the NetScaler appliance.Caution: Modifying these values can affect system performance.
Synopsys¶
set ns timeout [-zombie <positive_integer>] [-httpClient <positive_integer>] [-httpServer <positive_integer>] [-tcpClient <positive_integer>] [-tcpServer <positive_integer>] [-anyClient <positive_integer>] [-anyServer <positive_integer>] [-anyTcpClient <positive_integer>] [-anyTcpServer <positive_integer>] [-halfclose <positive_integer>] [-nontcpZombie <positive_integer>] [-ReducedFinTimeOut <positive_integer>] [-ReducedRstTimeOut <positive_integer>] [-NewConnIdleTimeOut <positive_integer>]
Arguments¶
zombie
Interval, in seconds, at which the NetScaler zombie cleanup process must run. This process cleans up inactive TCP connections.
Default value: 120
Minimum value: 1
Maximum value: 600
httpClient
Global idle timeout, in seconds, for client connections of HTTP service type. This value is over ridden by the client timeout that is configured on individual entities.
Default value: 0
Minimum value: 0
Maximum value: 18000
httpServer
Global idle timeout, in seconds, for server connections of HTTP service type. This value is over ridden by the server timeout that is configured on individual entities.
Default value: 0
Minimum value: 0
Maximum value: 18000
tcpClient
Global idle timeout, in seconds, for non-HTTP client connections of TCP service type. This value is over ridden by the client timeout that is configured on individual entities.
Default value: 0
Minimum value: 0
Maximum value: 18000
tcpServer
Global idle timeout, in seconds, for non-HTTP server connections of TCP service type. This value is over ridden by the server timeout that is configured on entities.
Default value: 0
Minimum value: 0
Maximum value: 18000
anyClient
Global idle timeout, in seconds, for non-TCP client connections. This value is over ridden by the client timeout that is configured on individual entities.
Default value: 0
Minimum value: 0
Maximum value: 31536000
anyServer
Global idle timeout, in seconds, for non TCP server connections. This value is over ridden by the server timeout that is configured on individual entities.
Default value: 0
Minimum value: 0
Maximum value: 31536000
anyTcpClient
Global idle timeout, in seconds, for TCP client connections. This value is overridden by the client timeout that is configured on individual entities.
Default value: 0
Minimum value: 0
Maximum value: 31536000
anyTcpServer
Global idle timeout, in seconds, for TCP server connections. This value is overridden by the server timeout that is configured on individual entities.
Default value: 0
Minimum value: 0
Maximum value: 31536000
halfclose
Idle timeout, in seconds, for connections that are in TCP half-closed state.
Default value: 10
Minimum value: 1
Maximum value: 600
nontcpZombie
Interval at which the zombie clean-up process for non-TCP connections should run. Inactive IP NAT connections will be cleaned up.
Default value: 60
Minimum value: 1
Maximum value: 600
ReducedFinTimeOut
Alternative idle timeout, in seconds, for closed TCP NATPCB connections.
Default value: 30
Minimum value: 1
Maximum value: 300
ReducedRstTimeOut
Timer interval, in seconds, for abruptly terminated TCP NATPCB connections.
Default value: 0
Minimum value: 0
Maximum value: 300
NewConnIdleTimeOut
Timer interval, in seconds, for new TCP NATPCB connections on which no data was received.
Default value: 4
Minimum value: 1
Maximum value: 120
Example¶
set ns timeout -zombie 200
unset ns timeout¶
Use this command to remove ns timeout settings.Refer to the set ns timeout command for meanings of the arguments.
Synopsys¶
unset ns timeout [-zombie] [-httpClient] [-httpServer] [-tcpClient] [-tcpServer] [-anyClient] [-anyServer] [-anyTcpClient] [-anyTcpServer] [-halfclose] [-nontcpZombie] [-ReducedFinTimeOut] [-ReducedRstTimeOut] [-NewConnIdleTimeOut]
show ns timeout¶
Displays the timeouts configured for various NetScaler entities.Note: The timeouts having default values are not displayed.
Synopsys¶
show ns timeout
Outputs¶
zombie
Timer interval(in seconds) for zombie process that cleanup inactive TCP connections
Minimum value: 1
Maximum value: 600
Default value: 120
client
Client idle timeout (in seconds). If zero, the service-type default value is taken when service is created.
server
Server idle timeout (in seconds). If zero, the service-type default value is taken when service is created.
httpClient
HTTP client idle timeout (in seconds)
Minimum value: 0
Maximum value: 18000
httpServer
HTTP server idle timeout (in seconds)
Minimum value: 0
Maximum value: 18000
tcpClient
TCP client idle timeout (in seconds)
Minimum value: 0
Maximum value: 18000
tcpServer
TCP server idle timeout (in seconds)
Minimum value: 0
Maximum value: 18000
anyClient
ANY client idle timeout (in seconds)
Minimum value: 0
Maximum value: 31536000
anyServer
ANY server idle timeout (in seconds)
Minimum value: 0
Maximum value: 31536000
halfclose
Half-closed connection timeout (in seconds)
Minimum value: 1
Maximum value: 600
Default value: 10
anyTcpClient
Global idle timeout, in seconds, for TCP client connections. This value is overridden by the client timeout that is configured on individual entities.
anyTcpServer
Global idle timeout, in seconds, for TCP server connections. This value is overridden by the server timeout that is configured on individual entities.
nontcpZombie
Timer interval(in seconds) for zombie process that cleanup inactive IP NAT connections
Minimum value: 1
Maximum value: 600
Default value: 60
ReducedFinTimeOut
Timer interval(in seconds) for NATPCB for tcp flow
ReducedRstTimeOut
Timer interval(in seconds) for NATPCB for tcp flow
NewConnIdleTimeOut
Timer interval(in seconds) for new NATPCB for tcp connections
Example¶
show ns timeout