ipTunnel¶
The following operations can be performed on "ipTunnel":
add ipTunnel¶
Creates an IPv4 tunnel. An IP tunnel is a communication channel, using encapsulation technologies, between two networks that do not have a routing path. Every IP packet that is shared between the two networks is encapsulated within another packet and then sent through the tunnel.
Synopsys¶
add ipTunnel <name> <remote> <remoteSubnetMask> <local> [-protocol <protocol> [-vlan <positive_integer>]] [-grepayload <grepayload>] [-ipsecProfileName <string>] [-ownerGroup <string>]
Arguments¶
name
Name for the IP tunnel. Leading character must be a number or letter. Other characters allowed, after the first character, are @ _ - . (period) : (colon) # and space ( ).
remote
Public IPv4 address, of the remote device, used to set up the tunnel. For this parameter, you can alternatively specify a network address.
remoteSubnetMask
Subnet mask of the remote IP address of the tunnel.
local
Type ofNetScaler owned public IPv4 address, configured on the local NetScaler appliance and used to set up the tunnel.
protocol
Name of the protocol to be used on this tunnel.
Possible values: IPIP, GRE, IPSEC, VXLAN
Default value: IPIP
grepayload
The payload GRE will carry
Possible values: ETHERNETwithDOT1Q, ETHERNET, IP
Default value: ETHERNETwithDOT1Q
ipsecProfileName
Name of IPSec profile to be associated.
Default value: "ns_ipsec_default_profile"
vlan
The vlan for mulicast packets
Minimum value: 1
Maximum value: 4094
ownerGroup
The owner node group in a Cluster for the iptunnel.
Default value: DEFAULT_NG
Example¶
add iptunnel tunnel1 10.100.20.0 255.255.255.0 *
rm ipTunnel¶
Removes an IP tunnel configuration from the NetScaler appliance.
Synopsys¶
rm ipTunnel <name>
Arguments¶
name
Name of the IP Tunnel.
Example¶
rm iptunnel tunnel1
show ipTunnel¶
Display the configured IP tunnels.
Synopsys¶
show ipTunnel [(<remote> <remoteSubnetMask>) | <name>]
Arguments¶
remote
Public IPv4 address, of the remote device, used to set up the tunnel. For this parameter, you can alternatively specify a network address.
remoteSubnetMask
Subnet mask of the remote IP address of the tunnel.
name
Name for the IP tunnel. Leading character must be a number or letter. Other characters allowed, after the first character, are @ _ - . (period) : (colon) # and space ( ).
Outputs¶
name
Name for the PBR
local
Type ofNetScaler owned public IPv4 address, configured on the local NetScaler appliance and used to set up the tunnel.
protocol
Name of the protocol to be used on this tunnel.
grepayload
The payload GRE will carry
type
The type of this tunnel.
encapIp
The effective local IP address of the tunnel. Used as the source of the encapsulated packets.
channel
The tunnel that is bound to a netbridge.
ipsecProfileName
Name of IPSec profile to be associated.
vlan
The vlan for mulicast packets
tunnelType
Indicates that a tunnel is User-Configured, Internal or DELETE-IN-PROGRESS.
ipsecTunnelStatus
Whether the ipsec on this tunnel is up or down.
ownerGroup
The owner node group in a Cluster for the iptunnel.
devno
count
stateflag
Example¶
1) Name.........: t1 Remote.......: 10.102.33.0 Mask......: 255.255.255.0 Local........: * Encap.....: 0.0.0.0 Protocol.....: IPIP Type......: C2) Name.........: tunnel1 Remote.......: 10.100.20.0 Mask......: 255.255.255.0 Local........: * Encap.....: 0.0.0.0 Protocol.....: IPIP Type......: C3) Name.........: Remote.......: 10.102.33.190 Mask......: 255.255.255.255 Local........: * Encap.....: 10.102.33.85 Protocol.....: IPIP Type......: I