ns trafficDomain¶
The following operations can be performed on "ns trafficDomain":
add | rm | clear | bind | unbind | enable | disable | show | stat
add ns trafficDomain¶
Configure Traffic Domain on the system.
Synopsys¶
add ns trafficDomain <td> [-aliasName <string>] [-vmac ( ENABLED | DISABLED )]
Arguments¶
td
Integer value that uniquely identifies a traffic domain.
Minimum value: 1
Maximum value: 4094
aliasName
Name of traffic domain being added.
vmac
Associate the traffic domain with a VMAC address instead of with VLANs. The NetScaler ADC then sends the VMAC address of the traffic domain in all responses to ARP queries for network entities in that domain. As a result, the ADC can segregate subsequent incoming traffic for this traffic domain on the basis of the destination MAC address, because the destination MAC address is the VMAC address of the traffic domain. After creating entities on a traffic domain, you can easily manage and monitor them by performing traffic domain level operations.
Possible values: ENABLED, DISABLED
Default value: DISABLED
Example¶
add ns trafficDomain 1 -aliasName td1
rm ns trafficDomain¶
Remove Traffic Domain configured.
Synopsys¶
rm ns trafficDomain <td>
Arguments¶
td
Integer value that uniquely identifies a traffic domain.
Minimum value: 1
Maximum value: 4094
Example¶
rm ns trafficDomain 1
clear ns trafficDomain¶
Remove Traffic Domain configuration.
Synopsys¶
clear ns trafficDomain <td>
Arguments¶
td
Integer value that uniquely identifies a traffic domain.
Minimum value: 1
Maximum value: 4094
bind ns trafficDomain¶
bind vlan or bridgegroup entities with traffic domain.
Synopsys¶
bind ns trafficDomain <td> [-vlan <positive_integer>] [-bridgegroup <positive_integer>] [-vxlan <positive_integer>]
Arguments¶
td
Integer value that uniquely identifies a traffic domain.
Minimum value: 1
Maximum value: 4094
vlan
ID of the VLAN to bind to this traffic domain. More than one VLAN can be bound to a traffic domain, but the same VLAN cannot be a part of multiple traffic domains.
Minimum value: 1
Maximum value: 4094
bridgegroup
ID of the configured bridge to bind to this traffic domain. More than one bridge group can be bound to a traffic domain, but the same bridge group cannot be a part of multiple traffic domains.
Minimum value: 1
Maximum value: 1000
vxlan
ID of the VXLAN to bind to this traffic domain. More than one VXLAN can be bound to a traffic domain, but the same VXLAN cannot be a part of multiple traffic domains.
Minimum value: 1
Maximum value: 16777215
Example¶
bind ns trafficDomain 1 -vlan 2
unbind ns trafficDomain¶
Unbind vlan or bridgegroup entities from traffic domain
Synopsys¶
unbind ns trafficDomain <td> [-vlan <positive_integer>] [-bridgegroup <positive_integer>] [-vxlan <positive_integer>]
Arguments¶
td
Integer value that uniquely identifies a traffic domain.
Minimum value: 1
Maximum value: 4094
vlan
ID of the VLAN to bind to this traffic domain. More than one VLAN can be bound to a traffic domain, but the same VLAN cannot be a part of multiple traffic domains.
Minimum value: 1
Maximum value: 4094
bridgegroup
ID of the configured bridge to bind to this traffic domain. More than one bridge group can be bound to a traffic domain, but the same bridge group cannot be a part of multiple traffic domains.
Minimum value: 1
Maximum value: 1000
vxlan
ID of the VXLAN to bind to this traffic domain. More than one VXLAN can be bound to a traffic domain, but the same VXLAN cannot be a part of multiple traffic domains.
Minimum value: 1
Maximum value: 16777215
Example¶
unbind ns trafficDomain 1 -vlan 2
enable ns trafficDomain¶
Enable TrafficDomain.
Synopsys¶
enable ns trafficDomain <td>
Arguments¶
td
Integer value that uniquely identifies a traffic domain.
Minimum value: 1
Maximum value: 4094
Example¶
enable ns trafficdomain 1
disable ns trafficDomain¶
Disable TrafficDomain.
Synopsys¶
disable ns trafficDomain <td>
Arguments¶
td
Integer value that uniquely identifies a traffic domain.
Minimum value: 1
Maximum value: 4094
Example¶
disable ns trafficdomain 1
show ns trafficDomain¶
Display Traffic Domain configuration.
Synopsys¶
show ns trafficDomain [<td>]
Arguments¶
td
Integer value that uniquely identifies a traffic domain.
Minimum value: 1
Maximum value: 4094
format
level
Outputs¶
aliasName
Name of traffic domain being added.
vmac
Associate the traffic domain with a VMAC address instead of with VLANs. The NetScaler ADC then sends the VMAC address of the traffic domain in all responses to ARP queries for network entities in that domain. As a result, the ADC can segregate subsequent incoming traffic for this traffic domain on the basis of the destination MAC address, because the destination MAC address is the VMAC address of the traffic domain. After creating entities on a traffic domain, you can easily manage and monitor them by performing traffic domain level operations.
stateflag
Used internally for display.
vlan
ID of the VLAN to bind to this traffic domain. More than one VLAN can be bound to a traffic domain, but the same VLAN cannot be a part of multiple traffic domains.
vxlan
ID of the VXLAN to bind to this traffic domain. More than one VXLAN can be bound to a traffic domain, but the same VXLAN cannot be a part of multiple traffic domains.
bridgegroup
ID of the configured bridge to bind to this traffic domain. More than one bridge group can be bound to a traffic domain, but the same bridge group cannot be a part of multiple traffic domains.
state
The state of TrafficDmain.
devno
count
Example¶
An example of the output of the show trafficDomain command is as follows:1) Traffic Domain: 1 Alias Name: State: ENABLED Vlans : 502) Traffic Domain: 2 Alias Name: State: ENABLED Vlans : 2 Bridge Group : 1Done
stat ns trafficDomain¶
Display statistics for Traffic Domains(s).
Synopsys¶
stat ns trafficDomain [<td>] [-detail] [-fullValues] [-ntimes <positive_integer>] [-logFile <input_filename>] [-clearstats ( basic | full )]
Arguments¶
td
An integer specifying the Traffic Domain ID. Possible values: 1 through 4094.
Minimum value: 1
Maximum value: 4094
clearstats
Clear the statsistics / counters
Possible values: basic, full
Outputs¶
count
devno
stateflag
Outputs¶
Packets received (TdRxPkts)
Packets received on this TD.
Packets sent (TdTxPkts)
Packets transmitted from this TD.
Packets dropped (TdDropPkts)
Inbound packets dropped on this TD by reception.
Example¶
stat ns trafficdomain 1