clusternode¶

Statistics for cluster node resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
nodeid	<Double>	Read-write	ID of the cluster node for which to display statistics. If an ID is not provided, statistics are shown for all nodes. Minimum value = 0 Maximum value = 31
clearstats	<String>	Read-write	Clear the statsistics / counters. Possible values = basic, full
clsyncstate	<String>	Read-only	Sync state of the cluster node.
clnodeeffectivehealth	<String>	Read-only	Health of the cluster node.
clnodeip	<String>	Read-only	NSIP address of the cluster node.
clmasterstate	<String>	Read-only	Operational state of the cluster node.
cltothbtx	<Double>	Read-only	Number of heartbeats sent. When executed from the NSIP address, shows the statistics for local node only. For remote node it shows a value of 0. When executed from the cluster IP address, shows all the statistics.
cltothbrx	<Double>	Read-only	Number of heartbeats received. When executed from the NSIP address, shows the statistics for local node only. For remote node it shows a value of 0. When executed from the cluster IP address, shows all the statistics.
nnmcurconn	<Double>	Read-only	Number of connections open for node-to-node communication.
nnmtotconntx	<Double>	Read-only	Number of node-to-node messages sent. When executed from the NSIP address, shows the statistics for local node only. For remote node it shows a value of 0. When executed from the cluster IP address, shows all the statistics.
nnmtotconnrx	<Double>	Read-only	Number of node-to-node messages received. When executed from the NSIP address, shows the statistics for local node only. For remote node it shows a value of 0. When executed from the cluster IP address, shows all the statistics.
clptpstate	<String>	Read-only	PTP state of the node. This state is Master for one node and Slave for the rest. When executed from the NSIP address, shows the statistics for local node only. For remote node it shows UNKNOWN. When executed from the cluster IP address, shows all the statistics.
clptptx	<Double>	Read-only	Number of PTP packets transmitted by the node. When executed from the NSIP address, shows the statistics for local node only. For remote node it shows a value of 0. When executed from the cluster IP address, shows all the statistics.
clptprx	<Double>	Read-only	Number of PTP packets received on the node. When executed from the NSIP address, shows the statistics for local node only. For remote node it shows a value of 0. When executed from the cluster IP address, shows all the statistics.
nnmerrmsend	<Double>	Read-only	Number of errors in sending node-to-node multicast/broadcast messages. When executed from the NSIP address, shows the statistics for local node only. For remote node it shows a value of 0. When executed from the cluster IP address, shows all the statistics.

Operations¶

(click to see Properties )

GET (ALL)
GET

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/stat/clusternode

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/stat/clusternode? args=nodeid: <Double_value> ,detail: <Boolean_value> ,fullvalues: <Boolean_value> ,ntimes: <Double_value> ,logfile: <String_value> ,clearstats: <String_value>

Use this query-parameter to get clusternode resources based on additional properties.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "clusternode": [ {
      "nodeid":<Double_value>,
      "clsyncstate":<String_value>,
      "nnmtotconnrx":<Double_value>,
      "clmasterstate":<String_value>,
      "clptptx":<Double_value>,
      "cltothbtx":<Double_value>,
      "clnodeip":<String_value>,
      "nnmcurconn":<Double_value>,
      "nnmerrmsend":<Double_value>,
      "clnodeeffectivehealth":<String_value>,
      "cltothbrx":<Double_value>,
      "clptprx":<Double_value>,
      "nnmtotconntx":<Double_value>,
      "clptpstate":<String_value>
}]}

get¶

URL: http:// <netscaler-ip-address> /nitro/v1/stat/clusternode/ nodeid_value><Double>