callhome¶

Configuration for callhome resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
nodeid	<Double>	Read-write	Unique number that identifies the cluster node. Minimum value = 0 Maximum value = 31
mode	<String>	Read-write	CallHome mode of operation. Default value: Default Possible values = Default, CSP
emailaddress	<String>	Read-write	Email address of the contact administrator. Maximum length = 78
hbcustominterval	<Double>	Read-write	Interval (in days) between CallHome heartbeats. Default value: 7 Minimum value = 1 Maximum value = 30
proxymode	<String>	Read-write	Enables or disables the proxy mode. The proxy server can be set by either specifying the IP address of the server or the name of the service representing the proxy server. Default value: NO Possible values = YES, NO
ipaddress	<String>	Read-write	IP address of the proxy server. Minimum length = 1
proxyauthservice	<String>	Read-write	Name of the service that represents the proxy server. Maximum length = 128
port	<Integer>	Read-write	HTTP port on the Proxy server. This is a mandatory parameter for both IP address and service name based configuration. Minimum value = 1 Range 1 - 65535 * in CLI is represented as 65535 in NITRO API
sslcardfirstfailure	<String>	Read-only	First occurrence SSL card failure.
sslcardlatestfailure	<String>	Read-only	Latest occurrence SSL card failure.
powfirstfail	<String>	Read-only	First occurrence power supply unit failure.
powlatestfailure	<String>	Read-only	Latest occurrence power supply unit failure.
hddfirstfail	<String>	Read-only	First occurrence hard disk drive failure.
hddlatestfailure	<String>	Read-only	Latest occurrence hard disk drive failure.
flashfirstfail	<String>	Read-only	First occurrence compact flash failure.
flashlatestfailure	<String>	Read-only	Latest occurrence compact flush failure.
rlfirsthighdrop	<String>	Read-only	First occurence of high rate limit drops.
rllatesthighdrop	<String>	Read-only	Latest occurence of high rate limit drops.
restartlatestfail	<String>	Read-only	Latest occurrence warm restart failure.
memthrefirstanomaly	<String>	Read-only	First occurrence of memory anomaly.
memthrelatestanomaly	<String>	Read-only	Latest occurrence of memory anomaly.
callhomestatus	<String[]>	Read-only	Callhome feature enabled/disable, register with upload server successful/failed. Possible values = ENABLED, DISABLED, SUCCESSFUL, FAILED, INVALID HOSTNAME, NO DNSSERVER, HOSTNAME RESOLUTION FAILED

Operations¶

(click to see Properties )

GET (ALL)
UPDATE
UNSET

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

update¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/callhome

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"callhome":{
      "mode":<String_value>,
      "emailaddress":<String_value>,
      "hbcustominterval":<Double_value>,
      "proxymode":<String_value>,
      "ipaddress":<String_value>,
      "proxyauthservice":<String_value>,
      "port":<Integer_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/callhome? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"callhome":{
      "mode":true,
      "emailaddress":true,
      "hbcustominterval":true,
      "proxymode":true,
      "ipaddress":true,
      "proxyauthservice":true,
      "port":true
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/callhome

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/callhome? args=nodeid: <Double_value>

Use this query-parameter to get callhome resources based on additional properties.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "callhome": [ {
nodeid:<Double_value>      "mode":<String_value>,
      "emailaddress":<String_value>,
      "hbcustominterval":<Double_value>,
      "proxymode":<String_value>,
      "ipaddress":<String_value>,
      "port":<Integer_value>,
      "proxyauthservice":<String_value>,
      "sslcardfirstfailure":<String_value>,
      "sslcardlatestfailure":<String_value>,
      "powfirstfail":<String_value>,
      "powlatestfailure":<String_value>,
      "hddfirstfail":<String_value>,
      "hddlatestfailure":<String_value>,
      "flashfirstfail":<String_value>,
      "flashlatestfailure":<String_value>,
      "rlfirsthighdrop":<String_value>,
      "rllatesthighdrop":<String_value>,
      "restartlatestfail":<String_value>,
      "memthrefirstanomaly":<String_value>,
      "memthrelatestanomaly":<String_value>,
      "callhomestatus":<String[]_value>
}]}