snmpgroup¶

Configuration for SNMP group resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
name	<String>	Read-write	Name for the SNMPv3 group. Can consist of 1 to 31 characters that include uppercase and lowercase letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at sign (@), equals (=), colon (:), and underscore (_) characters. You should choose a name that helps identify the SNMPv3 group. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose it in double or single quotation marks (for example, "my name" or 'my name'). Minimum length = 1
securitylevel	<String>	Read-write	Security level required for communication between the Citrix ADC and the SNMPv3 users who belong to the group. Specify one of the following options: noAuthNoPriv. Require neither authentication nor encryption. authNoPriv. Require authentication but no encryption. authPriv. Require authentication and encryption. Note: If you specify authentication, you must specify an encryption algorithm when you assign an SNMPv3 user to the group. If you also specify encryption, you must assign both an authentication and an encryption algorithm for each group member. Possible values = noAuthNoPriv, authNoPriv, authPriv
readviewname	<String>	Read-write	Name of the configured SNMPv3 view that you want to bind to this SNMPv3 group. An SNMPv3 user bound to this group can access the subtrees that are bound to this SNMPv3 view as type INCLUDED, but cannot access the ones that are type EXCLUDED. If the Citrix ADC has multiple SNMPv3 view entries with the same name, all such entries are associated with the SNMPv3 group. Minimum length = 1
storagetype	<String>	Read-only	The storage type for this group. Possible values = volatile, nonVolatile
status	<String>	Read-only	The status of this group. Possible values = active
__count	<Double>	Read-only	count parameter

Operations¶

(click to see Properties )

ADD
DELETE
UPDATE
GET (ALL)
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

add¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpgroup

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"snmpgroup":{
<b>      "name":<String_value>,
</b><b>      "securitylevel":<String_value>,
</b><b>      "readviewname":<String_value>
</b>}}

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpgroup/ name_value<String>

Query-parameters:

args= securitylevel:<String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpgroup

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"snmpgroup":{
<b>      "name":<String_value>,
</b><b>      "securitylevel":<String_value>,
</b><b>      "readviewname":<String_value>
</b>}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpgroup

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/snmpgroup? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/snmpgroup? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of snmpgroup resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/snmpgroup? view=summary

Use this query-parameter to get the summary output of snmpgroup resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/snmpgroup? pagesize=#no;pageno=#no

Use this query-parameter to get the snmpgroup resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "snmpgroup": [ {
      "name":<String_value>,
      "securitylevel":<String_value>,
      "readviewname":<String_value>,
      "storagetype":<String_value>,
      "status":<String_value>
}]}

count¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/snmpgroup? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "snmpgroup": [ { "__count": "#no"} ] }