scpolicy¶

Configuration for SureConnect policy resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
name	<String>	Read-write	Name for the policy. Must begin with an ASCII alphabetic or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. Minimum length = 1 Maximum length = 31
url	<String>	Read-write	URL against which to match incoming client request. Maximum length = 127
rule	<String>	Read-write	Expression against which the traffic is evaluated. Maximum length of a string literal in the expression is 255 characters. A longer string can be split into smaller strings of up to 255 characters each, and the smaller strings concatenated with the + operator. For example, you can create a 500-character string as follows: '"<string of 255 characters>" + "<string of 245 characters>"' The following requirements apply only to the Citrix ADC CLI: * If the expression includes one or more spaces, enclose the entire expression in double quotation marks. * If the expression itself includes double quotation marks, escape the quotations by using the character. * Alternatively, you can use single quotation marks to enclose the rule, in which case you do not have to escape the double quotation marks. Maximum length = 1499
delay	<Double>	Read-write	Delay threshold, in microseconds, for requests that match the policy's URL or rule. If the delay statistics gathered for the matching request exceed the specified delay, SureConnect is triggered for that request. Minimum value = 1 Maximum value = 599999999
maxconn	<Double>	Read-write	Maximum number of concurrent connections that can be open for requests that match the policy's URL or rule. Minimum value = 1 Maximum value = 4294967294
action	<String>	Read-write	Action to be taken when the delay or maximum-connections threshold is reached. Available settings function as follows: ACS - Serve content from an alternative content service. NS - Serve alternative content from the Citrix ADC. NO ACTION - Serve no alternative content. However, delay statistics are still collected for the configured URLs, and, if the Maximum Client Connections parameter is set, the number of connections is limited to the value specified by that parameter. (However, alternative content is not served even if the maxConn threshold is met). Possible values = ACS, NS, NOACTION
altcontentsvcname	<String>	Read-write	Name of the alternative content service to be used in the ACS action. Minimum length = 1 Maximum length = 127
altcontentpath	<String>	Read-write	Path to the alternative content service to be used in the ACS action. Minimum length = 1 Maximum length = 127
__count	<Double>	Read-only	count parameter

Operations¶

(click to see Properties )

ADD
DELETE
UPDATE
UNSET
GET (ALL)
GET
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

add¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/scpolicy

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"scpolicy":{
<b>      "name":<String_value>,
</b>      "url":<String_value>,
      "rule":<String_value>,
      "delay":<Double_value>,
      "maxconn":<Double_value>,
      "action":<String_value>,
      "altcontentsvcname":<String_value>,
      "altcontentpath":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/scpolicy/ name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/scpolicy

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"scpolicy":{
<b>      "name":<String_value>,
</b>      "url":<String_value>,
      "rule":<String_value>,
      "delay":<Double_value>,
      "maxconn":<Double_value>,
      "action":<String_value>,
      "altcontentsvcname":<String_value>,
      "altcontentpath":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/scpolicy? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"scpolicy":{
<b>      "name":<String_value>,
</b>      "delay":true,
      "maxconn":true
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/scpolicy

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/scpolicy? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/scpolicy? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of scpolicy resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/scpolicy? view=summary

Use this query-parameter to get the summary output of scpolicy resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/scpolicy? pagesize=#no;pageno=#no

Use this query-parameter to get the scpolicy resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "scpolicy": [ {
      "name":<String_value>,
      "url":<String_value>,
      "rule":<String_value>,
      "delay":<Double_value>,
      "maxconn":<Double_value>,
      "action":<String_value>,
      "altcontentsvcname":<String_value>,
      "altcontentpath":<String_value>
}]}

get¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/scpolicy/ name_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/scpolicy/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/scpolicy/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of scpolicy resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "scpolicy": [ {
      "name":<String_value>,
      "url":<String_value>,
      "rule":<String_value>,
      "delay":<Double_value>,
      "maxconn":<Double_value>,
      "action":<String_value>,
      "altcontentsvcname":<String_value>,
      "altcontentpath":<String_value>
}]}

count¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/scpolicy? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "scpolicy": [ { "__count": "#no"} ] }