nsappflowparam¶

Configuration for appflowParam resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
templaterefresh	<Double>	Read-write	IPFIX template refresh interval (in seconds). Default value: 600 Minimum value = 60 Maximum value = 3600
udppmtu	<Double>	Read-write	MTU to be used for IPFIX UDP packets. Default value: 1472 Minimum value = 128 Maximum value = 1472
httpurl	<String>	Read-write	Enable AppFlow HTTP URL logging. Default value: DISABLED Possible values = ENABLED, DISABLED
httpcookie	<String>	Read-write	Enable AppFlow HTTP cookie logging. Default value: DISABLED Possible values = ENABLED, DISABLED
httpreferer	<String>	Read-write	Enable AppFlow HTTP referer logging. Default value: DISABLED Possible values = ENABLED, DISABLED
httpmethod	<String>	Read-write	Enable AppFlow HTTP method logging. Default value: DISABLED Possible values = ENABLED, DISABLED
httphost	<String>	Read-write	Enable AppFlow HTTP host logging. Default value: DISABLED Possible values = ENABLED, DISABLED
httpuseragent	<String>	Read-write	Enable AppFlow HTTP user-agent logging. Default value: DISABLED Possible values = ENABLED, DISABLED
clienttrafficonly	<String>	Read-write	Control whether AppFlow records should be generated only for client-side traffic. Default value: NO Possible values = YES, NO

Operations¶

(click to see Properties )

UPDATE
UNSET
GET (ALL)

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

update¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/nsappflowparam

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nsappflowparam":{
      "templaterefresh":<Double_value>,
      "udppmtu":<Double_value>,
      "httpurl":<String_value>,
      "httpcookie":<String_value>,
      "httpreferer":<String_value>,
      "httpmethod":<String_value>,
      "httphost":<String_value>,
      "httpuseragent":<String_value>,
      "clienttrafficonly":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/nsappflowparam? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nsappflowparam":{
      "templaterefresh":true,
      "udppmtu":true,
      "httpurl":true,
      "httpcookie":true,
      "httpreferer":true,
      "httpmethod":true,
      "httphost":true,
      "httpuseragent":true,
      "clienttrafficonly":true
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/nsappflowparam

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nsappflowparam": [ {
      "templaterefresh":<Double_value>,
      "udppmtu":<Double_value>,
      "httpurl":<String_value>,
      "httpcookie":<String_value>,
      "httpreferer":<String_value>,
      "httpmethod":<String_value>,
      "httphost":<String_value>,
      "httpuseragent":<String_value>,
      "clienttrafficonly":<String_value>
}]}