vxlan¶

Configuration for "VXLAN" resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
id	<Double>	Read-write	A positive integer, which is also called VXLAN Network Identifier (VNI), that uniquely identifies a VXLAN. Minimum value = 1 Maximum value = 16777215
vlan	<Double>	Read-write	ID of VLANs whose traffic is allowed over this VXLAN. If you do not specify any VLAN IDs, the Citrix ADC allows traffic of all VLANs that are not part of any other VXLANs. Minimum value = 2 Maximum value = 4094
port	<Integer>	Read-write	Specifies UDP destination port for VXLAN packets. Default value: 4789 Minimum value = 1 Maximum value = 65534
dynamicrouting	<String>	Read-write	Enable dynamic routing on this VXLAN. Default value: DISABLED Possible values = ENABLED, DISABLED
ipv6dynamicrouting	<String>	Read-write	Enable all IPv6 dynamic routing protocols on this VXLAN. Note: For the ENABLED setting to work, you must configure IPv6 dynamic routing protocols from the VTYSH command line. Default value: DISABLED Possible values = ENABLED, DISABLED
type	<String>	Read-write	VXLAN encapsulation type. VXLAN, VXLANGPE. Default value: VXLAN Possible values = VXLAN, VXLANGPE
protocol	<String>	Read-write	VXLAN-GPE next protocol. RESERVED, IPv4, IPv6, ETHERNET, NSH. Default value: ETHERNET Possible values = IPv4, IPv6, ETHERNET, NSH
innervlantagging	<String>	Read-write	Specifies whether Citrix ADC should generate VXLAN packets with inner VLAN tag. Default value: DISABLED Possible values = ENABLED, DISABLED
td	<Double>	Read-only	Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0.
partitionname	<String>	Read-only	The Partition to which this vxlan is bound. Minimum length = 1
__count	<Double>	Read-only	count parameter

Operations¶

(click to see Properties )

ADD
DELETE
UPDATE
UNSET
GET (ALL)
GET
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

add¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vxlan":{
<b>      "id":<Double_value>,
</b>      "vlan":<Double_value>,
      "port":<Integer_value>,
      "dynamicrouting":<String_value>,
      "ipv6dynamicrouting":<String_value>,
      "type":<String_value>,
      "protocol":<String_value>,
      "innervlantagging":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan/ id_value<Double>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vxlan":{
<b>      "id":<Double_value>,
</b>      "vlan":<Double_value>,
      "port":<Integer_value>,
      "dynamicrouting":<String_value>,
      "ipv6dynamicrouting":<String_value>,
      "innervlantagging":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"vxlan":{
<b>      "id":<Double_value>,
</b>      "vlan":true,
      "port":true,
      "dynamicrouting":true,
      "ipv6dynamicrouting":true,
      "innervlantagging":true
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/vxlan? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/vxlan? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of vxlan resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/vxlan? view=summary

Use this query-parameter to get the summary output of vxlan resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/vxlan? pagesize=#no;pageno=#no

Use this query-parameter to get the vxlan resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "vxlan": [ {
      "id":<Double_value>,
      "vlan":<Double_value>,
      "port":<Integer_value>,
      "dynamicrouting":<String_value>,
      "ipv6dynamicrouting":<String_value>,
      "innervlantagging":<String_value>,
      "td":<Double_value>,
      "type":<String_value>,
      "protocol":<String_value>,
      "partitionname":<String_value>
}]}

get¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan/ id_value<Double>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/vxlan/ id_value<Double> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/vxlan/ id_value<Double> ? view=summary

Use this query-parameter to get the summary output of vxlan resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "vxlan": [ {
      "id":<Double_value>,
      "vlan":<Double_value>,
      "port":<Integer_value>,
      "dynamicrouting":<String_value>,
      "ipv6dynamicrouting":<String_value>,
      "innervlantagging":<String_value>,
      "td":<Double_value>,
      "type":<String_value>,
      "protocol":<String_value>,
      "partitionname":<String_value>
}]}

count¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vxlan? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "vxlan": [ { "__count": "#no"} ] }