vlan_interface_binding¶

Binding object showing the interface that can be bound to vlan.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
ownergroup	<String>	Read-write	The owner node group in a Cluster for this vlan. Default value: DEFAULT_NG Minimum length = 1
id	<Double>	Read-write	Specifies the virtual LAN ID. Minimum value = 1 Maximum value = 4094
ifnum	<String>	Read-write	The interface to be bound to the VLAN, specified in slot/port notation (for example, 1/3). Minimum length = 1
tagged	<Boolean>	Read-write	Make the interface an 802.1q tagged interface. Packets sent on this interface on this VLAN have an additional 4-byte 802.1q tag, which identifies the VLAN. To use 802.1q tagging, you must also configure the switch connected to the appliance's interfaces.
__count	<Double>	Read-write	count parameter

Operations¶

(click to see Properties )

ADD
DELETE
GET
GET (ALL)
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

add¶

URL: http:// <netscaler-ip-address /nitro/v1/config/vlan_interface_binding

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"vlan_interface_binding":{
<b>      "id":<Double_value>,
</b>      "ifnum":<String_value>,
      "tagged":<Boolean_value>,
      "ownergroup":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vlan_interface_binding/ id_value<Double>

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/vlan_interface_binding/ id_value<Double> ? args=ifnum: <String_value> ,tagged: <Boolean_value> ,ownergroup: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vlan_interface_binding/ id_value<Double>

Query-parameters:

filter

http:// <netscaler-ip-address> /nitro/v1/config/vlan_interface_binding/ id_value<Double> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of vlan_interface_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination

http:// <netscaler-ip-address> /nitro/v1/config/vlan_interface_binding/ id_value<Double> ? pagesize=#no;pageno=#no

Use this query-parameter to get the vlan_interface_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "vlan_interface_binding": [ {
      "ownergroup":<String_value>,
      "id":<Double_value>,
      "ifnum":<String_value>,
      "tagged":<Boolean_value>
}]}

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vlan_interface_binding

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters:

bulkbindings

http:// <netscaler-ip-address> /nitro/v1/config/vlan_interface_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "vlan_interface_binding": [ {
      "ownergroup":<String_value>,
      "id":<Double_value>,
      "ifnum":<String_value>,
      "tagged":<Boolean_value>
}]}

count¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/vlan_interface_binding/ id_value<Double> ? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"vlan_interface_binding": [ { "__count": "#no"} ] }