nat64param¶

Configuration for NAT64 parameter resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
td	<Double>	Read-write	Integer value that uniquely identifies the traffic domain in which you want to configure the entity. If you do not specify an ID, the entity becomes part of the default traffic domain, which has an ID of 0. Default value: 0 Minimum value = 0 Maximum value = 4094
nat64ignoretos	<String>	Read-write	Ignore TOS. Default value: NO Possible values = YES, NO
nat64zerochecksum	<String>	Read-write	Calculate checksum for UDP packets with zero checksum. Default value: ENABLED Possible values = ENABLED, DISABLED
nat64v6mtu	<Double>	Read-write	MTU setting for the IPv6 side. If the incoming IPv4 packet greater than this, either fragment or send icmp need fragmentation error. Default value: 1280 Minimum value = 1280 Maximum value = 9216
nat64fragheader	<String>	Read-write	When disabled, translator will not insert IPv6 fragmentation header for non fragmented IPv4 packets. Default value: ENABLED Possible values = ENABLED, DISABLED
__count	<Double>	Read-only	count parameter

Operations¶

(click to see Properties )

UPDATE
UNSET
GET (ALL)
GET
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

update¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/nat64param

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nat64param":{
      "td":<Double_value>,
      "nat64ignoretos":<String_value>,
      "nat64zerochecksum":<String_value>,
      "nat64v6mtu":<Double_value>,
      "nat64fragheader":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/nat64param? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"nat64param":{
      "td":<Double_value>,
      "nat64ignoretos":true,
      "nat64zerochecksum":true,
      "nat64v6mtu":true,
      "nat64fragheader":true
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/nat64param

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/nat64param? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/nat64param? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of nat64param resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/nat64param? view=summary

Use this query-parameter to get the summary output of nat64param resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/nat64param? pagesize=#no;pageno=#no

Use this query-parameter to get the nat64param resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nat64param": [ {
      "td":<Double_value>,
      "nat64ignoretos":<String_value>,
      "nat64zerochecksum":<String_value>,
      "nat64v6mtu":<Double_value>,
      "nat64fragheader":<String_value>
}]}

get¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/nat64param/ td_value<Double>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/nat64param/ td_value<Double> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/nat64param/ td_value<Double> ? view=summary

Use this query-parameter to get the summary output of nat64param resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "nat64param": [ {
      "td":<Double_value>,
      "nat64ignoretos":<String_value>,
      "nat64zerochecksum":<String_value>,
      "nat64v6mtu":<Double_value>,
      "nat64fragheader":<String_value>
}]}

count¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/nat64param? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "nat64param": [ { "__count": "#no"} ] }