lsnsession¶

Configuration for lsn session resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
nattype	<String>	Read-write	Type of sessions to be displayed. Default value: NAT44 Possible values = NAT44, DS-Lite, NAT64
clientname	<String>	Read-write	Name of the LSN Client entity.
network	<String>	Read-write	IP address or network address of subscriber(s).
netmask	<String>	Read-write	Subnet mask for the IP address specified by the network parameter.
network6	<String>	Read-write	IPv6 address of the LSN subscriber or B4 device.
td	<Double>	Read-write	Traffic domain ID of the LSN client entity. Default value: 0 Minimum value = 0 Maximum value = 4094
natip	<String>	Read-write	Mapped NAT IP address used in LSN sessions.
nodeid	<Double>	Read-write	Unique number that identifies the cluster node. Minimum value = 0 Maximum value = 31
natport2	<Integer>	Read-write	Mapped NAT port used in the LSN sessions.
natprefix	<String>	Read-only	IPv6 address of the LSN subscriber(s) or subscriber network(B4-Device) on whose traffic the Citrix ADC perform Large Scale NAT.
subscrip	<String>	Read-only	The Source IP address.
subscrport	<Integer>	Read-only	The Source Port.
destip	<String>	Read-only	The Destination IP address.
destport	<Integer>	Read-only	The Destination Port.
natport	<Integer>	Read-only	The NAT Port.
transportprotocol	<String>	Read-only	The Transport Protocol for the session. Possible values = TCP, UDP, ICMP
sessionestdir	<String>	Read-only	The Session establishment direction, session was established for outbound or inbound packet. Possible values = OUT, IN
dsttd	<Double>	Read-only	.
srctd	<Double>	Read-only	.
ipv6address	<String>	Read-only	IPv6 address of v6 vserver.
__count	<Double>	Read-only	count parameter

Operations¶

(click to see Properties )

GET (ALL)
COUNT
FLUSH

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

flush¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? action=flush

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"lsnsession":{
      "nattype":<String_value>,
      "clientname":<String_value>,
      "network":<String_value>,
      "netmask":<String_value>,
      "network6":<String_value>,
      "td":<Double_value>,
      "natip":<String_value>,
      "natport2":<Integer_value>,
      "nodeid":<Double_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsession

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? args=nattype: <String_value> ,clientname: <String_value> ,network: <String_value> ,netmask: <String_value> ,network6: <String_value> ,td: <Double_value> ,natip: <String_value> ,nodeid: <Double_value>

Use this query-parameter to get lsnsession resources based on additional properties.

attrs

http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of lsnsession resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? view=summary

Use this query-parameter to get the summary output of lsnsession resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? pagesize=#no;pageno=#no

Use this query-parameter to get the lsnsession resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "lsnsession": [ {
nattype:<String_value>,clientname:<String_value>,network:<String_value>,netmask:<String_value>,network6:<String_value>,td:<Double_value>,natip:<String_value>,nodeid:<Double_value>      "natprefix":<String_value>,
      "subscrip":<String_value>,
      "subscrport":<Integer_value>,
      "destip":<String_value>,
      "destport":<Integer_value>,
      "natport":<Integer_value>,
      "transportprotocol":<String_value>,
      "sessionestdir":<String_value>,
      "dsttd":<Double_value>,
      "srctd":<Double_value>,
      "ipv6address":<String_value>
}]}

count¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/lsnsession? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "lsnsession": [ { "__count": "#no"} ] }