ipsecparameter¶

Configuration for IPSEC paramter resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
ikeversion	<String>	Read-write	IKE Protocol Version. Default value: V2 Possible values = V1, V2
encalgo	<String[]>	Read-write	Type of encryption algorithm (Note: Selection of AES enables AES128). Default value: AES Possible values = AES, 3DES, AES192, AES256
hashalgo	<String[]>	Read-write	Type of hashing algorithm. Default value: HMAC_SHA256 Possible values = HMAC_SHA1, HMAC_SHA256, HMAC_SHA384, HMAC_SHA512, HMAC_MD5
lifetime	<Double>	Read-write	Lifetime of IKE SA in seconds. Lifetime of IPSec SA will be (lifetime of IKE SA/8). Minimum value = 480 Maximum value = 31536000
livenesscheckinterval	<Double>	Read-write	Number of seconds after which a notify payload is sent to check the liveliness of the peer. Additional retries are done as per retransmit interval setting. Zero value disables liveliness checks. Minimum value = 0 Maximum value = 64999
replaywindowsize	<Double>	Read-write	IPSec Replay window size for the data traffic. Minimum value = 0 Maximum value = 16384
ikeretryinterval	<Double>	Read-write	IKE retry interval for bringing up the connection. Minimum value = 60 Maximum value = 3600
perfectforwardsecrecy	<String>	Read-write	Enable/Disable PFS. Default value: DISABLE Possible values = ENABLE, DISABLE
retransmissiontime	<Double>	Read-write	The interval in seconds to retry sending the IKE messages to peer, three consecutive attempts are done with doubled interval after every failure, increases for every retransmit till 6 retransmits. Minimum value = 1 Maximum value = 99
responderonly	<String>	Read-only	Responder Only config for IKED. Default value: NO Possible values = YES, NO

Operations¶

(click to see Properties )

UPDATE
UNSET
GET (ALL)

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

update¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/ipsecparameter

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"ipsecparameter":{
      "ikeversion":<String_value>,
      "encalgo":<String[]_value>,
      "hashalgo":<String[]_value>,
      "lifetime":<Double_value>,
      "livenesscheckinterval":<Double_value>,
      "replaywindowsize":<Double_value>,
      "ikeretryinterval":<Double_value>,
      "perfectforwardsecrecy":<String_value>,
      "retransmissiontime":<Double_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/ipsecparameter? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"ipsecparameter":{
      "ikeversion":true,
      "encalgo":true,
      "hashalgo":true,
      "lifetime":true,
      "livenesscheckinterval":true,
      "replaywindowsize":true,
      "ikeretryinterval":true,
      "perfectforwardsecrecy":true,
      "retransmissiontime":true
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/ipsecparameter

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "ipsecparameter": [ {
      "ikeversion":<String_value>,
      "encalgo":<String[]_value>,
      "hashalgo":<String[]_value>,
      "lifetime":<Double_value>,
      "livenesscheckinterval":<Double_value>,
      "replaywindowsize":<Double_value>,
      "ikeretryinterval":<Double_value>,
      "perfectforwardsecrecy":<String_value>,
      "responderonly":<String_value>,
      "retransmissiontime":<Double_value>
}]}