contentinspectionpolicy¶

Configuration for ContentInspection policy resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
name	<String>	Read-write	Name for the contentInspection policy. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) pound (#), space ( ), at (@), equals (=), colon (:), and underscore characters. Can be changed after the contentInspection policy is added. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my contentInspection policy" or 'my contentInspection policy').
rule	<String>	Read-write	Expression that the policy uses to determine whether to execute the specified action.
action	<String>	Read-write	Name of the contentInspection action to perform if the request matches this contentInspection policy. There are also some built-in actions which can be used. These are: * NOINSPECTION - Send the request from the client to the server or response from the server to the client without sending it to Inspection device for Content Inspection. * RESET - Resets the client connection by closing it. The client program, such as a browser, will handle this and may inform the user. The client may then resend the request if desired. * DROP - Drop the request without sending a response to the user.
undefaction	<String>	Read-write	Action to perform if the result of policy evaluation is undefined (UNDEF). An UNDEF event indicates an internal error condition. Only the above built-in actions can be used.
comment	<String>	Read-write	Any type of information about this contentInspection policy.
logaction	<String>	Read-write	Name of the messagelog action to use for requests that match this policy.
newname	<String>	Read-write	New name for the contentInspection policy. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) hash (#), space ( ), at (@), equals (=), colon (:), and underscore characters. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my contentInspection policy" or 'my contentInspection policy'). Minimum length = 1
hits	<Double>	Read-only	Number of hits.
undefhits	<Double>	Read-only	Number of policy UNDEF hits.
builtin	<String[]>	Read-only	Flag to determine if contentInspection policy is built-in or not. Possible values = MODIFIABLE, DELETABLE, IMMUTABLE, PARTITION_ALL
feature	<String>	Read-only	The feature to be checked while applying this config.
__count	<Double>	Read-only	count parameter

Operations¶

(click to see Properties )

ADD
DELETE
UPDATE
UNSET
GET (ALL)
GET
COUNT
RENAME

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

add¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"contentinspectionpolicy":{
<b>      "name":<String_value>,
</b><b>      "rule":<String_value>,
</b><b>      "action":<String_value>,
</b>      "undefaction":<String_value>,
      "comment":<String_value>,
      "logaction":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy/ name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"contentinspectionpolicy":{
<b>      "name":<String_value>,
</b>      "rule":<String_value>,
      "action":<String_value>,
      "undefaction":<String_value>,
      "comment":<String_value>,
      "logaction":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"contentinspectionpolicy":{
<b>      "name":<String_value>,
</b>      "undefaction":true,
      "comment":true,
      "logaction":true
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

rename¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? action=rename

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"contentinspectionpolicy":{
<b>      "name":<String_value>,
</b><b>      "newname":<String_value>
</b>}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of contentinspectionpolicy resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? view=summary

Use this query-parameter to get the summary output of contentinspectionpolicy resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? pagesize=#no;pageno=#no

Use this query-parameter to get the contentinspectionpolicy resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "contentinspectionpolicy": [ {
      "name":<String_value>,
      "rule":<String_value>,
      "action":<String_value>,
      "undefaction":<String_value>,
      "hits":<Double_value>,
      "undefhits":<Double_value>,
      "comment":<String_value>,
      "logaction":<String_value>,
      "builtin":<String[]_value>,
      "feature":<String_value>
}]}

get¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy/ name_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of contentinspectionpolicy resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "contentinspectionpolicy": [ {
      "name":<String_value>,
      "rule":<String_value>,
      "action":<String_value>,
      "undefaction":<String_value>,
      "hits":<Double_value>,
      "undefhits":<Double_value>,
      "comment":<String_value>,
      "logaction":<String_value>,
      "builtin":<String[]_value>,
      "feature":<String_value>
}]}

count¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/contentinspectionpolicy? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "contentinspectionpolicy": [ { "__count": "#no"} ] }