bfdsession¶

Configuration for BFD configuration resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
localip	<String>	Read-write	IPV4 or IPV6 Address of Local Node.
remoteip	<String>	Read-write	IPV4 or IPV6 Address of Remote Node.
state	<String>	Read-only	Current state of the BFD session. Possible values = ADMIN DOWN, DOWN, INIT, UP
localport	<Double>	Read-only	Source Port used by Local node to send Control packets for the BFD session.
remoteport	<Double>	Read-only	Source Port used by Remote node to send Control packets for the BFD session.
minimumtransmitinterval	<Double>	Read-only	Minimum trasmit interval, in milliseconds, the local node would like to use when transmitting BFD Control packets.
negotiatedminimumtransmitinterval	<Double>	Read-only	Negotiated Minimum Transmit Interval. This is the interval at which the local node will be sending out BFD control packets.
minimumreceiveinterval	<Double>	Read-only	Minimum receive interval, in milliseconds, between received BFD Control packets that the local node is capable of supporting.
negotiatedminimumreceiveinterval	<Double>	Read-only	Negotiated Minimum Receive Interval. This is the interval at which the local node will be expecting BFD control packets.
multiplier	<Double>	Read-only	Detection Multiplier. The negotiated transmit interval multiplied by Detection multiplier provides the Detection Time for the remote node for the BFD session.
remotemultiplier	<Double>	Read-only	Your Multiplier. The negotiated receive interval multiplied by Your Multiplier provides the Detection Time for the local node for the BFD session.
vlan	<Double>	Read-only	VLAN ID on which the BDS session is configured.
localdiagnotic	<Double>	Read-only	Diagnostic Code specifying the local system's reason for the last change in session state.
localdiscriminator	<Double>	Read-only	A unique discriminator value generated by the local node for the session.
remotediscriminator	<Double>	Read-only	A unique discriminator value as received from the remote node for the session.
passive	<Boolean>	Read-only	Flag indicating that the session is passive.
multihop	<Boolean>	Read-only	Flag indicating if the session is multihop.
admindown	<Boolean>	Read-only	Flag indicating if admin down is being sent.
originalownerpe	<Double>	Read-only	Original Owner PE of the BFD session.
currentownerpe	<Double>	Read-only	Current Owner PE of the BFD session.
ownernode	<Double>	Read-only	The owner node in a Cluster for this BFD session. Owner node can vary from 0 to 31. If ownernode is not specified then the session is treated as Striped session. Default value: 255
__count	<Double>	Read-only	count parameter

Operations¶

(click to see Properties )

GET (ALL)
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/bfdsession

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/bfdsession? args=localip: <String_value> ,remoteip: <String_value>

Use this query-parameter to get bfdsession resources based on additional properties.

attrs

http:// <netscaler-ip-address> /nitro/v1/config/bfdsession? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/bfdsession? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of bfdsession resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/bfdsession? view=summary

Use this query-parameter to get the summary output of bfdsession resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/bfdsession? pagesize=#no;pageno=#no

Use this query-parameter to get the bfdsession resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "bfdsession": [ {
localip:<String_value>,remoteip:<String_value>      "state":<String_value>,
      "localport":<Double_value>,
      "remoteport":<Double_value>,
      "minimumtransmitinterval":<Double_value>,
      "negotiatedminimumtransmitinterval":<Double_value>,
      "minimumreceiveinterval":<Double_value>,
      "negotiatedminimumreceiveinterval":<Double_value>,
      "multiplier":<Double_value>,
      "remotemultiplier":<Double_value>,
      "vlan":<Double_value>,
      "localdiagnotic":<Double_value>,
      "localdiscriminator":<Double_value>,
      "remotediscriminator":<Double_value>,
      "passive":<Boolean_value>,
      "multihop":<Boolean_value>,
      "admindown":<Boolean_value>,
      "originalownerpe":<Double_value>,
      "currentownerpe":<Double_value>,
      "ownernode":<Double_value>
}]}

count¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/bfdsession? count=yes