Skip to content
Was this article helpful?

servicegroupbindings

Configuration for servicegroupbind resource.

Properties

(click to see Operations )

Name Data Type Permissions Description
servicegroupname <String> Read-write The name of the service.

Minimum length = 1
ipaddress <String> Read-only The IP address of the vserver.
port <Integer> Read-only The port of the vserver.

Range 1 - 65535

* in CLI is represented as 65535 in NITRO API
state <String> Read-only The state of the service group.

Possible values = ENABLED, DISABLED
svrstate <String> Read-only The state of the vserver.

Possible values = UP, DOWN, UNKNOWN, BUSY, OUT OF SERVICE, GOING OUT OF SERVICE, DOWN WHEN GOING OUT OF SERVICE, NS_EMPTY_STR, Unknown, DISABLED
vservername <String> Read-only The name of the vserver.
__count <Double> Read-only count parameter

Operations

(click to see Properties )

  • GET (ALL)
  • GET
  • COUNT

Some options that you can use for each operations:

  • Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:

    http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes

    If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.

  • Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,

    To do this, you must specify the username and password in the request header of the NITRO request as follows:

    X-NITRO-USER: <username>

    X-NITRO-PASS: <password>

    Note: In such cases, make sure that the request header DOES not include the following:

    Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

get (all)

URL: http:// <netscaler-ip-address> /nitro/v1/config/servicegroupbindings

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/servicegroupbindings? args= servicegroupname:<String_value>,

Use this query-parameter to get servicegroupbindings resources based on additional properties.

attrs

http:// <netscaler-ip-address> /nitro/v1/config/servicegroupbindings? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/servicegroupbindings? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of servicegroupbindings resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/servicegroupbindings? view=summary

Use this query-parameter to get the summary output of servicegroupbindings resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/servicegroupbindings? pagesize=#no;pageno=#no

Use this query-parameter to get the servicegroupbindings resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 

{ "servicegroupbindings": [ {
<b>servicegroupname:<String_value>,</b>      "ipaddress":<String_value>,
      "port":<Integer_value>,
      "state":<String_value>,
      "svrstate":<String_value>,
      "vservername":<String_value>
}]}

get

URL: http:// <netscaler-ip-address> /nitro/v1/config/servicegroupbindings/ servicegroupname_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/servicegroupbindings/ servicegroupname_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/servicegroupbindings/ servicegroupname_value<String> ? view=summary

Use this query-parameter to get the summary output of servicegroupbindings resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 

{  "servicegroupbindings": [ {
<b>servicegroupname:<String_value>,</b>      "ipaddress":<String_value>,
      "port":<Integer_value>,
      "state":<String_value>,
      "svrstate":<String_value>,
      "vservername":<String_value>
}]}

count

URL: http:// <netscaler-ip-address> /nitro/v1/config/servicegroupbindings? args= servicegroupname:<String_value>, ;count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload: 

{ "servicegroupbindings": [ { "__count": "#no"} ] }
Was this article helpful?