authenticationoauthidppolicy¶

Configuration for AAA OAuth IdentityProvider (IdP) policy resource.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
name	<String>	Read-write	Name for the OAuth Identity Provider (IdP) authentication policy. This is used for configuring Citrix ADC as OAuth Identity Provider. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore, hash (#), period (.), space, colon (:), at (@), equals (=), and hyphen (-) characters. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my policy" or 'my policy'). Minimum length = 1
rule	<String>	Read-write	Expression that the policy uses to determine whether to respond to the specified request. Minimum length = 1
action	<String>	Read-write	Name of the profile to apply to requests or connections that match this policy. Minimum length = 1
undefaction	<String>	Read-write	Action to perform if the result of policy evaluation is undefined (UNDEF). An UNDEF event indicates an internal error condition. Only DROP/RESET actions can be used.
comment	<String>	Read-write	Any comments to preserve information about this policy.
logaction	<String>	Read-write	Name of messagelog action to use when a request matches this policy.
newname	<String>	Read-write	New name for the OAuth IdentityProvider policy. Must begin with a letter, number, or the underscore character (_), and must contain only letters, numbers, and the hyphen (-), period (.) hash (#), space ( ), at (@), equals (=), colon (:), and underscore characters. The following requirement applies only to the Citrix ADC CLI: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my oauthidppolicy policy" or 'my oauthidppolicy policy'). Minimum length = 1
gotopriorityexpression	<String>	Read-only	Expression specifying the priority of the next policy which will get evaluated if the current policy rule evaluates to TRUE.
hits	<Double>	Read-only	Number of hits.
__count	<Double>	Read-only	count parameter

Operations¶

(click to see Properties )

ADD
DELETE
UPDATE
UNSET
GET (ALL)
GET
COUNT
RENAME

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

add¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationoauthidppolicy":{
<b>      "name":<String_value>,
</b><b>      "rule":<String_value>,
</b><b>      "action":<String_value>,
</b>      "undefaction":<String_value>,
      "comment":<String_value>,
      "logaction":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy/ name_value<String>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

update¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationoauthidppolicy":{
<b>      "name":<String_value>,
</b>      "rule":<String_value>,
      "action":<String_value>,
      "undefaction":<String_value>,
      "comment":<String_value>,
      "logaction":<String_value>
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

unset¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy? action=unset

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationoauthidppolicy":{
<b>      "name":<String_value>,
</b>      "undefaction":true,
      "comment":true,
      "logaction":true
}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

rename¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy? action=rename

HTTP Method: POST

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{"authenticationoauthidppolicy":{
<b>      "name":<String_value>,
</b><b>      "newname":<String_value>
</b>}}

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

filter

http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy? filter=property-name1:property-val1,property-name2:property-val2

Use this query-parameter to get the filtered set of authenticationoauthidppolicy resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

view

http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy? view=summary

Use this query-parameter to get the summary output of authenticationoauthidppolicy resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

pagination

http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy? pagesize=#no;pageno=#no

Use this query-parameter to get the authenticationoauthidppolicy resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "authenticationoauthidppolicy": [ {
      "name":<String_value>,
      "rule":<String_value>,
      "action":<String_value>,
      "undefaction":<String_value>,
      "comment":<String_value>,
      "logaction":<String_value>,
      "gotopriorityexpression":<String_value>,
      "hits":<Double_value>
}]}

get¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy/ name_value<String>

Query-parameters:

attrs

http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy/ name_value<String> ? attrs=property-name1,property-name2

Use this query parameter to specify the resource details that you want to retrieve.

view

http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy/ name_value<String> ? view=summary

Use this query-parameter to get the summary output of authenticationoauthidppolicy resources configured on NetScaler.

Note: By default, the retrieved results are displayed in detail view (?view=detail).

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "authenticationoauthidppolicy": [ {
      "name":<String_value>,
      "rule":<String_value>,
      "action":<String_value>,
      "undefaction":<String_value>,
      "comment":<String_value>,
      "logaction":<String_value>,
      "gotopriorityexpression":<String_value>,
      "hits":<Double_value>
}]}

count¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/authenticationoauthidppolicy? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{ "authenticationoauthidppolicy": [ { "__count": "#no"} ] }