appfwprofile_xmlwsiurl_binding¶

Binding object showing the xmlwsiurl that can be bound to appfwprofile.

Properties¶

(click to see Operations )

Name	Data Type	Permissions	Description
xmlwsichecks	<String>	Read-write	Specify a comma separated list of relevant WS-I rule IDs. (R1140, R1141).
name	<String>	Read-write	Name of the profile to which to bind an exemption or rule. Minimum length = 1
xmlwsiurl	<String>	Read-write	XML WS-I URL regular expression length.
state	<String>	Read-write	Enabled. Possible values = ENABLED, DISABLED
isautodeployed	<String>	Read-write	Is the rule auto deployed by dynamic profile ?. Possible values = AUTODEPLOYED, NOTAUTODEPLOYED
comment	<String>	Read-write	Any comments about the purpose of profile, or other useful information about the profile.
alertonly	<String>	Read-write	Send SNMP alert?. Possible values = ON, OFF
__count	<Double>	Read-write	count parameter

Operations¶

(click to see Properties )

ADD
DELETE
GET
GET (ALL)
COUNT

Some options that you can use for each operations:

Getting warnings in response: NITRO allows you to get warnings in an operation by specifying the 'warning' query parameter as 'yes'. For example, to get warnings while connecting to the NetScaler appliance, the URL is as follows:
http:// <netscaler-ip-address> /nitro/v1/config/login?warning=yes
If any, the warnings are displayed in the response payload with the HTTP code '209 X-NITRO-WARNING'.
Authenticated access for individual NITRO operations: NITRO allows you to logon to the NetScaler appliance to perform individual operations. You can use this option instead of creating a NITRO session (using the login object) and then using that session to perform all operations,
To do this, you must specify the username and password in the request header of the NITRO request as follows:
X-NITRO-USER: <username>
X-NITRO-PASS: <password>
Note: In such cases, make sure that the request header DOES not include the following:
Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Note:

Mandatory parameters are marked in red and placeholder content is marked in green

add¶

URL: http:// <netscaler-ip-address /nitro/v1/config/appfwprofile_xmlwsiurl_binding

HTTP Method: PUT

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Content-Type:application/json

Request Payload:

{
"appfwprofile_xmlwsiurl_binding":{
<b>      "name":<String_value>,
</b>      "comment":<String_value>,
      "state":<String_value>,
      "xmlwsiurl":<String_value>,
      "xmlwsichecks":<String_value>,
      "isautodeployed":<String_value>
}}

Response:

HTTP Status Code on Success: 201 Created

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

delete¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_xmlwsiurl_binding/ name_value<String>

Query-parameters:

args

http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_xmlwsiurl_binding/ name_value<String> ? args=xmlwsiurl: <String_value>

HTTP Method: DELETE

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

get¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_xmlwsiurl_binding/ name_value<String>

Query-parameters:

filter

http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_xmlwsiurl_binding/ name_value<String> ? filter=property-name1:property-value1,property-name2:property-value2

Use this query-parameter to get the filtered set of appfwprofile_xmlwsiurl_binding resources configured on NetScaler.Filtering can be done on any of the properties of the resource.

pagination

http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_xmlwsiurl_binding/ name_value<String> ? pagesize=#no;pageno=#no

Use this query-parameter to get the appfwprofile_xmlwsiurl_binding resources in chunks.

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "appfwprofile_xmlwsiurl_binding": [ {
      "xmlwsichecks":<String_value>,
      "name":<String_value>,
      "xmlwsiurl":<String_value>,
      "state":<String_value>,
      "isautodeployed":<String_value>,
      "comment":<String_value>,
      "alertonly":<String_value>
}]}

get (all)¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_xmlwsiurl_binding

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Query-parameters:

bulkbindings

http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_xmlwsiurl_binding? bulkbindings=yes

NITRO allows you to fetch bindings in bulk.

Note: get (all) method can be used only in conjuction with bulkbindings query parameter.

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{  "appfwprofile_xmlwsiurl_binding": [ {
      "xmlwsichecks":<String_value>,
      "name":<String_value>,
      "xmlwsiurl":<String_value>,
      "state":<String_value>,
      "isautodeployed":<String_value>,
      "comment":<String_value>,
      "alertonly":<String_value>
}]}

count¶

URL: http:// <netscaler-ip-address> /nitro/v1/config/appfwprofile_xmlwsiurl_binding/ name_value<String> ? count=yes

HTTP Method: GET

Request Headers:

Cookie:NITRO_AUTH_TOKEN= <tokenvalue>

Accept:application/json

Response:

HTTP Status Code on Success: 200 OK

HTTP Status Code on Failure: 4xx <string> (for general HTTP errors) or 5xx <string> (for NetScaler-specific errors). The response payload provides details of the error

Response Header:

Content-Type:application/json

Response Payload:

{"appfwprofile_xmlwsiurl_binding": [ { "__count": "#no"} ] }