callhome¶
The following operations can be performed on "callhome":
show callhome¶
Displays the CallHome configuration and trigger event details.
Synopsis¶
show callhome
Arguments¶
Output¶
mode
CallHome mode of operation
emailAddress
Email address of the contact administrator.
hbCustomInterval
Interval (in days) between CallHome heartbeats
proxyMode
Enables or disables the proxy mode. The proxy server can be set by either specifying the IP address of the server or the name of the service representing the proxy server.
IPAddress
IP address of the proxy server.
port
HTTP port on the Proxy server. This is a mandatory parameter for both IP address and service name based configuration.
proxyAuthService
Name of the service that represents the proxy server.
sslcardfirstfailure
First occurrence SSL card failure.
sslcardlatestfailure
Latest occurrence SSL card failure.
powfirstfail
First occurrence power supply unit failure.
powlatestfailure
Latest occurrence power supply unit failure.
HDDfirstfail
First occurrence hard disk drive failure.
HDDlatestfailure
Latest occurrence hard disk drive failure.
FLASHfirstfail
First occurrence compact flash failure.
FLASHlatestfailure
Latest occurrence compact flush failure.
RLfirstHighDrop
First occurence of high rate limit drops
RLlatestHighDrop
Latest occurence of high rate limit drops
restartLatestfail
Latest occurrence warm restart failure.
memthreFirstAnomaly
First occurrence of memory anomaly.
memthreLatestAnomaly
Latest occurrence of memory anomaly.
callhomestatus
Callhome feature enabled/disable, register with upload server successful/failed
Example¶
show callhome Mode: Default E-mail address configured:[email protected] Heartbeat Custom Interval(days): 20
Trigger event State First occurrence Latest occurrence
------------- ----- ---------------- -----------------
1) Compact flash errors Enabled ....
2) Hard disk drive errors Enabled ....
3) Power supply unit failure Enabled 27 Aug 2010 18:22:47 28 Aug 2010 18:22:47
4) SSL card failure Enabled 25 Aug 2010 18:22:47 26 Aug 2010 18:22:47
5) Warm restart Enabled N/A ..
set callhome¶
Sets CallHome parameters
Synopsis¶
set callhome [-mode (DEFAULT | CSP)] [-emailAddress <string>] [-proxyMode ( YES | NO )] [-IPAddress <ip_addr|ipv6_addr|> | -proxyAuthService <string>] [-port <port|>] [-hbCustomInterval <number of days>]
Arguments¶
mode
CallHome mode of operation
Possible values: Default, CSP Default value: Default
emailAddress
Email address of the contact administrator.
hbCustomInterval
Interval (in days) between CallHome heartbeats Default value: 7 Minimum value: 1 Maximum value: 30
proxyMode
Enables or disables the proxy mode. The proxy server can be set by either specifying the IP address of the server or the name of the service representing the proxy server.
Possible values: YES, NO Default value: NO
IPAddress
IP address of the proxy server.
proxyAuthService
Name of the service that represents the proxy server.
port
HTTP port on the Proxy server. This is a mandatory parameter for both IP address and service name based configuration. Minimum value: 1
Example¶
set callhome -mode default -emailAddress [email protected] -proxyMode YES -proxyauthService callhome_proxy -port 80 -hbCustomInterval 6
unset callhome¶
Use this command to remove callhome settings.Refer to the set callhome command for meanings of the arguments.
Synopsis¶
unset callhome [-mode] [-emailAddress] [-hbCustomInterval] [-proxyMode] [-IPAddress] [-proxyAuthService] [-port]