subscriber-sessions¶
The following operations can be performed on "subscriber-sessions":
clear subscriber sessions¶
Deletes a subscriber session. Without any arguement it clears the subscriber session database.
Synopsis¶
clear subscriber sessions [<ip>@] [<vlan>]
Arguments¶
ip
Subscriber IP Address. Default value: 0
vlan
The vlan number on which the subscriber is located. Default value: 0 Minimum value: 0 Maximum value: 4096
Example¶
clear subscriber session or \nclear subscriber session 3.3.3.3
show subscriber sessions¶
show command of a subscriber session
Synopsis¶
show subscriber sessions [<ip>@] [<vlan>]
Arguments¶
ip
Subscriber IP Address.
vlan
The vlan number on which the subscriber is located. Default value: 0 Minimum value: 0 Maximum value: 4096
Output¶
subscriptionIdType
Subscription-Id type
subscriptionIdvalue
Subscription-Id value
subscriberRules
Rules stored in this session for this subscriber. When PCRF sends Charging-Rule-Name or Charging-Rule-Base-Name AVP for a subscriber, Citrix ADC stores these AVPs in the subscriber session. These Rules can be retreived using 'Subscriber.Rule_Active(<rule name>)' expression. For static subscriber profiles, these rules are configured using '-subscriberRules <list of rules>'.
stateflag
Flags controlling the display.
flags
Subscriber Session flags.
TTL
Subscriber Session revalidation Timeout remaining. This TTL gets refreshed when a radius or CCA or RAR message is received for this subscriber session. Citrix ADC will send a CCR-U after revalidation timer expires. If subscriber sessions is a negative session, then Citrix ADC will send a CCR-I after TTL expires. Negative Sessions are sessions which have not been resolved by PCRF and instead of polling PCRF continously, Citrix ADC has installed a negative session. If default subscriber is configued, then Negative Sessions inherits default subscriber profile.
idleTTL
Subscriber Session Activity Timeout remaining. Citrix ADC will take an idleAction after ttl expires. idleaction could be -->
1. ccrTerminate: (default) send CCR-T to inform PCRF about session termination and delete the session.
2. delete: Just delete the subscriber session without informing PCRF.
3. ccrUpdate: Do not delete the session and instead send a CCR-U to PCRF requesting for an updated session.
But if this is a negative session and idleaction is ccrUpdate then Citrix ADC won't take any action. Also on negative sessions ccrTerminate translates to delete.
avpdisplaybuffer
Subscriber Attributes Display.
servicePath
Name of the servicepath to be taken for this subscriber.
devno
count
Example¶
show subscriber session 10.102.217.4