pcp-profile¶
The following operations can be performed on "pcp-profile":
add pcp profile¶
Creates a pcp profile.
Synopsis¶
add pcp profile <name> [-mapping ( ENABLED | DISABLED )] [-peer ( ENABLED | DISABLED )] [-minMapLife <secs>] [-maxMapLife <secs>] [-announceMultiCount <positive_integer>] [-thirdParty ( ENABLED | DISABLED )]
Arguments¶
name
Name for the PCP Profile. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore CLI Users: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my pcpProfile" or my pcpProfile).
mapping
This argument is for enabling/disabling the MAP opcode of current PCP Profile
Possible values: ENABLED, DISABLED Default value: ENABLED
peer
This argument is for enabling/disabling the PEER opcode of current PCP Profile
Possible values: ENABLED, DISABLED Default value: ENABLED
minMapLife
Integer value that identify the minimum mapping lifetime (in seconds) for a pcp profile. default(120s) Minimum value: 1 Maximum value: 2147483647
maxMapLife
Integer value that identify the maximum mapping lifetime (in seconds) for a pcp profile. default(86400s = 24Hours). Minimum value: 1 Maximum value: 2147483647
announceMultiCount
Integer value that identify the number announce message to be send. Default value: 10 Minimum value: 0 Maximum value: 65535
thirdParty
This argument is for enabling/disabling the THIRD PARTY opcode of current PCP Profile
Possible values: ENABLED, DISABLED Default value: DISABLED
Example¶
add pcp profile prof1
rm pcp profile¶
Removes a pcp profile from the Citrix ADC.
Synopsis¶
rm pcp profile <name>@ ...
Arguments¶
name
Name of the pcp server.
Example¶
rm pcp profile prof1
set pcp profile¶
Modifies the specified parameters of a pcp profile.
Synopsis¶
set pcp profile <name> [-mapping ( ENABLED | DISABLED )] [-peer ( ENABLED | DISABLED )] [-minMapLife <secs>] [-maxMapLife <secs>] [-announceMultiCount <positive_integer>] [-thirdParty ( ENABLED | DISABLED )]
Arguments¶
name
Name for the PCP Profile. Must begin with an ASCII alphanumeric or underscore (_) character, and must contain only ASCII alphanumeric, underscore CLI Users: If the name includes one or more spaces, enclose the name in double or single quotation marks (for example, "my pcpProfile" or my pcpProfile).
mapping
This argument is for enabling/disabling the MAP opcode of current PCP Profile
Possible values: ENABLED, DISABLED Default value: ENABLED
peer
This argument is for enabling/disabling the PEER opcode of current PCP Profile
Possible values: ENABLED, DISABLED Default value: ENABLED
minMapLife
Integer value that identify the minimum mapping lifetime (in seconds) for a pcp profile. default(120s) Minimum value: 1 Maximum value: 2147483647
maxMapLife
Integer value that identify the maximum mapping lifetime (in seconds) for a pcp profile. default(86400s = 24Hours). Minimum value: 1 Maximum value: 2147483647
announceMultiCount
Integer value that identify the number announce message to be send. Default value: 10 Minimum value: 0 Maximum value: 65535
thirdParty
This argument is for enabling/disabling the THIRD PARTY opcode of current PCP Profile
Possible values: ENABLED, DISABLED Default value: DISABLED
Example¶
set pcp profile prof1 -MAPPING ENABLED
unset pcp profile¶
Use this command to remove pcp profile settings.Refer to the set pcp profile command for meanings of the arguments.
Synopsis¶
unset pcp profile <name> [-mapping] [-peer] [-minMapLife] [-maxMapLife] [-announceMultiCount] [-thirdParty]
show pcp profile¶
Displays the pcp server information.
Synopsis¶
show pcp profile [<name>]
Arguments¶
name
Name of the pcp server.
Output¶
mapping
This argument is for enabling/disabling the MAP opcode of current PCP Profile
peer
This argument is for enabling/disabling the PEER opcode of current PCP Profile
minMapLife
Integer value that identify the minimum mapping lifetime (in seconds) for a pcp profile. default(120s)
maxMapLife
Integer value that identify the maximum mapping lifetime (in seconds) for a pcp profile. default(86400s = 24Hours).
announceMultiCount
Integer value that identify the number announce message to be send.
thirdParty
This argument is for enabling/disabling the THIRD PARTY opcode of current PCP Profile
devno
count
stateflag